Recent content by WinnRig

  1. W

    More Ram Sticks you have the higher the CPU Temps?- Prime 95

    My Memory is running rock solid with the XMP Settings
  2. W

    32gb Corsair Vengeance Pro ddr3 2400ghz won't run at 2400ghz- What to do?

    I'm still not sure. I want to pick 13th Monkey because his comment on the timings makes sense. I think Tradesman's link is awesome but it doesn't cover looser timings having an effect on voltage or compatibility.So it doesn't cover 13th Monkeys explanation. I can't' discount that my...
  3. W

    More Ram Sticks you have the higher the CPU Temps?- Prime 95

    All ram on a Haswell CPU is overclocked to meet the manufacturers Rating which is why I have this in the OC section. 2 Questions 1. Does Running less sticks of ram lower CPU Temperature under Stress [See my Testing Below] 2. Does Running Lower GB of Ram also lower CPU Temperatures. Example 2...
  4. W

    32gb Corsair Vengeance Pro ddr3 2400ghz won't run at 2400ghz- What to do?

    I ran in to a problem following your instructions. VCCIO or DDRVITT settings weren't found in my Bios. Since I mostly use Linux I didn't want to use a Windows Utility to try to make it work. I went to Fry's returned the modules and bought two sets of PNY Anarchy Cl12 DDR3 2666 Modules [8X4]...
  5. W

    32gb Corsair Vengeance Pro ddr3 2400ghz won't run at 2400ghz- What to do?

    I can only get my 4 stick of 8gb memory to run at 2200mhz. Yes I understand the difference is negligible but darned it if i'm spending more than $1,000.00 for a computer upgrade, I want perfection. If it says 2400mhz I want it to run at 2400mhz. On the advise of Asrock I tested each stick...
  6. W

    "Restart to UEFI" failed on ASRock H110M-DGS, stuck before UEFI

    Read the manual you'll find on line if you don't have the original, ASROCK Motherboards have a jumper. Turn off the computer, then move the jumper to 2,3 for 15 seconds while the system is off. The Bios is reset to factory settings. Don't know if this will help but I had a problem when...
  7. W

    Why does Display Port Increase stability and performance in SLI?

    I'm not going to mess with a good thing. I'm happy that it works better and I'll leave it at that. Sometimes theoretical and real life don't match. In the past using different CPU and monitor there was always an imbalance in the voltages and % utilization of the cards. I switch to Display Port...
  8. W

    Why does Display Port Increase stability and performance in SLI?

    I recently picked up a BenQ 3200PT Monitor, yes I know it's only 60hz but size does matter. Games are very immersive at 32" and limiting the frames to 58FPS no ghosting or blurring. [That an amateur like me can notice] I have two Asus GTX-660 9Non TI]running in SLI Initially I set it up it...
  9. W

    Hard drive became unallocated, proceeded to format and recover data. Still can't boot from drive though.

    Paragon Hard Disk Manager. http://www.paragon-software.com/home/ They've been around for umpteen years and many computer pro's swear by them. The program is also user friendly. If you get it and need help feel free to PM me. I've used this program for years. Just the older version and it's...
  10. W

    Choosing a Hard Drive

  11. W

    Choosing a Hard Drive