Recent content by wmrayt

I understand every one saying back ups are the way to go. So my question is how do you do yours? I use AOMEI. I made a full backup then set sequential of certain directories to run daily. I am thinking that this is wrong after re reading the instructions today. Instead of naming directories...

Three WD Red 2TB NAS Internal Hard Drive - 5400 RPM Class, SATA 6Gb/s, SMR, 256MB Cache, 3.5" - WD20EFAX

Does any one know of a Drive cage/rack for the Corsair 4000D. Does not look like an option on their web site.

I get it no one likes raid any more or sees no reason for it. But explain to me how replacing a nvme if one bites the dust is not easier than booting from a flash drive that may or may not still be viable after setting up( yes they do fail) and then restoring from a back up that is made up of a...

got it working so yes nvme does work with raid 1 on this motherboard. The problem came from the lack of a step on ASUS web site in the set up instructions. The drives have to be initialized prior to setting up the raid. It may not be as fast as a stand alone on port one but not to shabby. And...

View: https://imgur.com/a/jqwjVlD

yes that is my motherboard. I followed the online instructions on setting the bios by setting SATA to RAID then directly under that set NVME raid to enabled along with the settings needed prior to that. my backup prior to this build was with a probox with 3 WD red 1tb drives set in windows...

Yes I understand one port is much faster than the other. But both would be faster than the hard drive. Also the bios clearly says to set Sata to Raid and enable raid on NVME directly under that setting.

I built a new system with a Asus ROG STRIX B550-F. AMD Ryzen 7 5700G. 64GB ram. Set up with existing Windows 10 drive that I cloned from old system. Everything working great except the drive is a WD Red and slow. So I put in two Samsung 990 Pro with heatsink 1 TB. Had to install a stand alone...

Wondering since ubiquiti says that the M2 is not supported for wireless access point any longer if the software update has turned off some of the previously available functions. ON my Nanostation M2 main page at the bottom where all videos shows two connections with graphs showing the traffic...

now Im receiving this when I run diag. and the test to see if fixed: "local area connection" does't have a valid IP configuration

Which peplink would you recommend? The first one that I see that takes cell is recommended for medium size businesses. And can not find a price without calling them. (never could understand putting road blocks between my product and the customer).

I have tried the set up as in the link. No luck. No internet over the connection. I tried the Ubiquiti site and their forums. Only reply I got was from some ont wanting to help if I paid him. Nice.

I have tried this. https://help.ubnt.com/hc/en-us/articles/205197710-airMAX-Configure-a-Long-Range-WiFi-Client#4 Not working. The only thing I can not get to change is under Lan Network settings. Mine says Bridge and can not change to Lan0.

Ok thanks, I will try this.