Recent content by Wrick Daz

In India, GM Modular is a household brand and their products and accessories have been used in many buildings. At one time, Once there was an incident in our area where suddenly there was a rush of current and high voltage due to cutting of a tree which fell on the lines. I heard popping...

Thanks for the knowledge... I will be getting one of these digital voltmeter.. seems useful.. 1. Also, can you suggest a good UPS?.. I am hardly finding any UPS which is rated for 850W.. I will also be using a monitor there.. 2. The surge protector has written 10A 240V and the wire that I had...

I checked today and the input power cable to my PSU is a 250V 6A cable.. and on this product it is written 10A 240V. So I was asking whether it will be safe to use this surge protector on the computer ? I saw the document you have given and there for the 850Watt PSU, it is written on page 12...

Actually I have been using the above mentioned product for a few years now and they have been ON continuously for several days at a stretch.. Once there was an incident in our area where suddenly there was a rush of current and voltage due to cutting a tree on the lines and these had been a...

I am from India and I have a Deepcool DQ850M-V3L PSU 80+ gold and I am thinking of using a surge protector on it. I have been using surge protectors for many years now on several electrical appliances and on one time some of them gave up their life to protect the appliances...

I need an UPS to balance out this voltage fluctuations so that it doesn't hurt my rig and also backup of 5 mins is just OK since I will just put the PC to hibernate/shutdown and turn off the main power. So is a 1500VA ups with 900W rating enough for my rig? Also in my area, for the same VA...

I have been using my PC for quite a while now where my PSU is connected directly to the wall socket but recently in our area, I have come across a situation where there are voltage fluctuations almost everyday.. Its like sometimes the light and the fan would get almost turned off but then...

also I recently saw that the GPU was sagging.. so I installed this (https://www.amazon.in/gp/product/B0BXL4FGQJ/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&th=1) .. I hope it will not be a problem..

Made the cardboard and covered the inside with electrical tape.. with 2 fans outside as exhaust.. worked well when ran the cinebench for 10 mins (81C max).. thinking of making a custom tempered glass with the same measurements and cuts.. Also another thing is I limit the wattage of cpu to 125W...

it will be 5 intakes and 2 exhausts.. wont it be a problem ?

you are right.. there are 3 intakes.. 1 exhause in back and one in top.. CPU has 2 fans.. ideal temperature of CPU stays around 48C and the ideal temperature of the system stays around 42C.. GPU ideal temperature stays around 46C.. The room I work is not air-conditioned ( and cannot be air...

also will this be a problem if I use the cardboard like I said here?..

tried that.. but the issue persists mainly where the CPU cooler is.. (++ the cooler is huge)

there is the PSU and also there are 2HDDs (the HDD slot is there).. the hot air will directly be released on them.. So I am not planning to go with that.. ( Specially don't want to bother the PSU and the HDDs because there is very less escape route for the hot air)

My PC generates a lot of heat while gaming(no OC but watt limited) even with 3 intakes and 2 exhausts and 2 noctua cpu fans..Room temps generally stays around 25-35C except in when sometimes it goes to 40C and in winter when temps goes around 15-20C).. Specs: 13600kf with Noctua NF-D15, 3070ti...