Recent content by XBloodyR

Thanks everyone for replying. I've concluded out of my experience with the very unstable first releases of the b350 boards which affected me even more at first, I don't want to wait for the DDR5 with new Mobos and Ryzen 6000. After all there might be issues with these as well and I also imagine...

So currently I have: Ryzen 1700 Trident Z RGB 2x8GB 3200 Mhz GTX 1080 Aorus Extreme Edition B350 Tomahawk XFX 550 Watts PSU From the beginning I was rather disappointed with the mainboard, because they didn't seem to get everything running properly no matter what BIOS changes they made. Even...

Well it was sent trough amazon logistics not trough dhl or hermes like is usual here in germany atleast.

I also bought it from amazon and yes there were no of those tapes on the box, as i thought it was most likely returned already. Thank you.

So 2 days ago i got my Gigabyte GTX 1080 G1 gaming what was already curious is that the antistatic film was unsealed already and the card was not even inside of it but lying on top of it. I just tried it out anyway and the temperatures went really crazy in the normal gaming mode which has about...

I want to add that I do not really care about how efficient it works im fine with it running at 90% because i just got my power supply very recently so i dont really wanna waste that money to buy a new one i would rather have worse efficiency.

I want to get the RX Vega 64 which is supposed to have 295 tdp. I have a 550 Watt power supply with 80+ gold rating. I tried to calculate the wattage with a similar demanding card the GTX 690 which has a tdp of 300 with the outervision power supply calculator: Load Wattage: 479 W Recommended UPS...

Im going to get some good thermal paste then. What do you think is 94 degree max acceptable for stress test? seems like a scary temp to me.

I am using the latest drivers. So i flashed the bios to the latest official one and it did not change anything really it crashed again at the end then i set the cpu voltage to 1.275V and ran the intel burn test on standard 50 passes and it crashed after about 8 passes and got up to 89 degrees...

So i tried again with 2666 16 18 18 36 and it kind of passed the test but when it said stopping stress test after the 15 mins it crashed again my monitor got no input anymore like in the previous crashes. The temperature topped out at 85 degree this time it doesent go higher than that. I should...

Im running my Ryzen 1700 at 3.7 Ghz on 1.2625V with stock cooler it idles at about 35-45 degrees with an ambient of 25 degrees. Now i did a realbench stress test with 8GB of memory tested and it crashed after 10 minutes and topped out at 86 degrees, I am using HWmonitor it shows about the same...

The BIOS is the latest one available. Yes i did a benchmark already and the results were as you would expect for 1550 Mhz. Edit: Found out that it is running with 1.28V and got it stable at 3.75 Ghz for now hopefully agesa 1.0.0.6 will fix this issue and i can finally go over 1.3V to overclock.

Hey, my problem is that my Ryzen 1700 wont overclock without auto voltage no matter what voltage i set it to tried 1.275, 1.3, 1.325, 1.35 and 1.375 with 3.7 and 3.8 Ghz overclock after booting up it will stay at 1550 Mhz no matter what while the voltage is shown to be 1.376 in cpu-z and 1.0 in...

I ordered a BitFenix Aurora it has an included 120mm rear fan additionally I got 4x BitFenix Spectre Pro 140mm. Obviously i can only put 2 in front and 2 on top i would go with 2 front intake 1 rear exhaust and 2 top exhaust but i actully would prefer to have positive pressure what would be the...