Recent content by XdbodzX

  1. X

    Replacing a graphics card help

    I'm upgrading from a GTX 760 to a 1060 and am not sure how to go about reinstalling the drivers. I am aware I have to use DDU however I'm not sure which options to use or when to use it. I would like a clean install of drivers as I'm having some issues with the screen flickering with my...
  2. X

    BIOS won't allow me to change my CPU ratio

    I have been able to do this for a while but then my house had a powercut during a BIOS update. This soft bricked my motherboard and I had to re-install the BIOS through a special recovery mode. The only issue is whenever I try to change my CPU ratio, the maximum it will allow me is 38. I had...
  3. X

    Are these voltages normal for an i5 3570K overclock?

    I was able to hit 4.4GHz with a +0.035V offset and this is perfectly stable. However to get to 4.5GHz I need to have a +0.080V offset to get it stable. This is a large jump in voltages needed to get from 4.4GHz to 4.5 so am I doing something wrong or is this to be expected? Thanks a ton, Dan.
  4. X

    Question about voltages when overclocking

    Hi so I'm overclocking my i5-3570k and seem to have it stable at 4.5 GHz with a +0.035 V offset. The only issue is that I'm trying to research what other people have been able to achieve with the same CPU and lots of them have the raw voltage instead of the offset. I've tried to use CPU-Z to...
  5. X

    MSI afterburner power limit percentage question

    For some reason, I can only set my power limit % to 105 and that's as high as I can go. I've seen other people able to set theirs much higher for the same graphics card (gtx 760). Is there something I'm doing wrong? Thanks a lot, Dan.
  6. X

    MSI afterburner showing low GPU memory clock?

    I was looking at various websites trying to overclock my graphics card and as shown here, http://www.ocdrift.com/review-asus-gtx760-directcu-ii-oc/ the stock memory clock is around 6000 MHz, however in afterburner it's showing my memory clock to be 3000 MHz and 3350 MHz when I overclock it. I...
  7. X

    Will a replacement fan for a hyper 212 evo benefit the cooling?

    I'd like my CPU to run a bit cooler and have the Hyper 212 evo with the stock fan. I'm not looking to upgrade the cooler so was wondering if buying a more expensive fan will benefit the cooling much if at all? If so, are there any fans that have a good reputation? Thanks, Dan.
  8. X

    How do I check if SLI is working?

    Many guides online say to enable it in the Nvidia control panel however I cannot see an option with the most recent driver. Does anyone have any experience with this? Thanks, Dan.