A) I did it exactly like that. I first set the Vcore in Manual Mode, test it out a little and then set it to adaptive mode when I found a stable voltage. I found 1,25V at 4,6Ghz stable after a few tests, but the system gives out 1,28V at max even though I've set the Vcore to 1,25V with a...
A) I did the same testing with 4,8 Ghz while running Adaptive Mode, which always supplies the CPU with more voltage than needed in most cases. But I don´t get the function of the adaptive mode 100%, because it doesn´t matter if I set the Offset sign to "+" or"-" or if I type in 1,2V or 1,25V as...
As I said I already moved the top fans so the temps you see are the temps you ask for. Removing the front panel doesn´t change anything. The case is getting plenty of air
I just received my new thermal paste (Arctic MX-4) and reinstalled the pump block.
I took some pictures of the already applied thermal paste:
https://drive.google.com/file/d/1eRPnN6vgT12XmopIgvnorQzGoMW-SV2u/view?usp=sharing...
No I installed it about half a year ago and didn't have any trouble until I started to overclock a bit more. The cooler is sitting on top of the cpu with no movement or something like that at all.
The pump is at 100% almost all the time and I can definetly hear it work
I even tried to loosen...
Hello everyone,
this is my first post and I will try to present my problem as good as I can.
My Specs:
Intel i7 7700k @4,6/4,8 Ghz // 1,25/1,3V
NZXT Kraken X72 Push/Pull
32Gb G.Skill RipJaws V @ 3200Mhz // 1,353V
MSI Geforce Gtx 1060 Gaming X 6Gb
Asus ROG Strix Z270E Gaming
500Gb SanDisk...