Recent content by yikchandev

does it come in a paste when you apply it? or is it actual liquid?

I have a cooling pad already, a thermaltake massive rgb, https://www.amazon.com/Thermaltake-Massive-Notebook-Cooling-CL-N014-PL20SW/dp/B077974X66/ref=sr_1_1?dchild=1&keywords=thermaltake+massive+20+rgb&qid=1614911752&sr=8-1 but i would like to have my temps lower. especially since im starting...

Hi, after about 6 months of usage for my asus rog zephyrus m15(GU502LW), my temps have been getting quite hot. Under load, my cpu is around 90c to 93c and GPU is about 83c - 86c under load. Thats quite hot for my laptop right? On the site it says it uses liquid metal for cpu cooling and I'm...

Hi, after about 6 months of usage for my asus rog zephyrus m15(GU502LW), my temps have been getting quite hot. Under load, my cpu is around 90c to 93c and GPU is about 83c - 86c under load. Thats quite hot for my laptop right? On the site it says it uses liquid metal for cpu cooling and I'm...

Hey guys! I just recently bought an ASUS ROG Zephyrus M15(2020) with the i7 10750h and 2070 Max-Q. Apparently it has 16gb 3200mhz ram. It is only running at 2933 however. After researching this, only the i7 10850h variants of this laptop can support 3200mhz. Now heres the question: Since the...

I happened to get a tiny little bit of thermal paste in socket. Will this cause symptoms of pc shutting down after half a second of powering on? I believe I have a bad mobo I bought from ebay, but he took pictures of it working before shipping it to me. View: https://imgur.com/a/KxjqNup

So now I have a heatsink installed, it's doing the same thing when the 8pin EPS is plugged in. However, there's progress, if I unplug the EPS, it turn on for 3 whole seconds, instead of half a second. It also keeps rebooting, whereas it didn't before, power would just stop Any ideas?

Ok I'm going to pick up a heatsink right now I'll let you know what happens thanks man I appreciate it

Ok I'm going to buy one right now. Question, how does it know if there's no heatsink installed? Pressure? Or the rate of the rise in temperatures? In a fraction of a second?

I've plugged in a case fan on the cpu_fan header just to make sure it doesn't do this. However, if I unplug the 8 pin eps, it powers on for a TINY bit longer, maybe 1 second, instead of a fraction of a second with the eps connector.

How quickly? I've had an aio installed. It did the same thing. I suspected it to be a bad aio because I've had to refill it in the past. That's why I took it off I don't want it to leak onto the cpu/new motherboard. When the power does after being on for a fraction of a second, I can feel the...

I'm having problems and I've narrowed it down to either a mobo or cpu problem. It turns off for less than a second then turns off. I've tried multiple good psus. BUT I just thought of one thing. Will not having a cpu heatink installed cause this? I'm just trying to get POST.

I took the cpu cooler off. But now neither power supplies will work. Still doing the same thing. Would a dead cpu be the cause of this?

No I've always thought it was a faulty psu and got unlucky. This time however I was curious and I tried the supposedly failing psu into another working build and voila it works. I tried the psu that was from my other build and it works as well. Is there such a thing as a half fried psu? Maybe...

I have a surge protector and I've tried different outlets