Recent content by youri1983

Rammedstein Did the dangerDen wb and pump bring down your temps a lot in comparisson with the stoch TT set-up? Cause I am using the TT set up now and would like to improve my temps a bit more. Thanks

Yes i know, but it took no effort at all to reach the 3.4 Ghz and it performs well and stable on 3.6 Ghz, but in my opinion it`s not an improvement, if the temps and Vcore have to go up so much for 200 Mhz extra. Are the other settings ok? or are they to low in comparison with the Vcore? Thanks...

Ive got a Thermaltake watercooling block on my CPU. Thermaltake Kandalf LCS includes a all copper waterblock, 600 l/h waterpump, 360mm radiator and 3 12CM radiator fans.

Ive been ocing a bit and got my E6600 up to 3.4 Ghz, now im trying to reach the 3.6 ghz, but i need to increase the Vcore quitte a bit to make the system stable. Current specs: Fsb: 380 (3.4 Ghz) Vcore: 1.425 Vmch: 1.55 Vfsb: 1.40 Vich: 1.05 (lowest from default value) Temp: 39C under load...

Im glad to read that the P5W and E6600 is a nice match, just bought a similar set up and I was really pleased with the oc you can get on it. It`s currently running at 3.4 without major vcore upping at a load temp of 39C (using a Thermaltake Kandalf Liquid Cooling System case) I did find out...

Thank you for replying I have tried coretemp as well. It shows normal core 0 and 1 temps, but shows me that the Tjunction is 85C under idle or load, I don`t really believe that. Is there a way to configure the Tjunction temp sensor in coretemp?

I could really use some help on reading and understanding the temps shown by speedfan 4.32 I have just bought a new system and because I want to give OCing a go, I wanted to know how stable it is before I start OCing. Some specs Asus P5W DH deluxe Intel Core 2 Duo 6600 2GB Corsair Dominator...