Zphere

Prominent

Joined: Oct 1, 2023

Last seen: Tuesday at 11:47 PM

Latest activity Postings Featured content About Trophies

- Zphere reacted to geofelt's post in the thread Question My idle temps are on average 60 C and I cannot get them lower with Like.
  
  Your fan curve starts at zero. To address idle temperatures, make the fan curve start at a higher number to begin with. Perhaps 500 rpm...
  
  Oct 16, 2024
- Zphere replied to the thread Question My idle temps are on average 60 C and I cannot get them lower.
  
  Hi, just a quick update! I repasted my CPU with thermal grizzly hydronaut and also added 2 more intake fans on the back side of the AIO...
  
  Oct 16, 2024
- Zphere replied to the thread [SOLVED] Persistent BSOD Issue caused by ntoskrnl.exe -- Any help is appreciated!.
  
  following the most recent windows updates, I have not had another BSOD... at least not yet lol.
  
  Oct 12, 2024
- Zphere reacted to JohnBonhamsGhost's post in the thread Question My idle temps are on average 60 C and I cannot get them lower with Like.
  
  the thermal dynamic rules of heat rising are only in a static environment. with a high enough positive pressure in the case the cooler...
  
  Oct 11, 2024
- Zphere reacted to emitfudd's post in the thread Question My idle temps are on average 60 C and I cannot get them lower with Like.
  
  My idle temp with a 5900X is 41C. 57 is too high for idle. Something is off. My opinion, top fans should be set to exhaust. Heat rises...
  
  Oct 11, 2024
- Zphere replied to the thread Question My idle temps are on average 60 C and I cannot get them lower.
  
  I did actually switch them around again back to the way I had it (AIO Fans as intake, top as exhaust) and it honestly was about the...
  
  Oct 11, 2024
- Zphere replied to the thread Question My idle temps are on average 60 C and I cannot get them lower.
  
  View: https://imgur.com/a/UgvB3hB I just got around to trying the fan orientation you mentioned. Top fans are now all intake and...
  
  Oct 11, 2024
- Zphere reacted to JohnBonhamsGhost's post in the thread Question My idle temps are on average 60 C and I cannot get them lower with Like.
  
  rotate these so that the heated CPU air is exhausting out of the case. the way it is setup all of the heated air is just pumping right...
  
  Oct 11, 2024
- Zphere replied to the thread Question My idle temps are on average 60 C and I cannot get them lower.
  
  yes, it is inside the case
  
  Oct 11, 2024
- Zphere replied to the thread Question My idle temps are on average 60 C and I cannot get them lower.
  
  I will give those fan orientations a test run and see how it goes. I'll also look into getting a 280mm rad in the future if I am still...
  
  Oct 11, 2024
- Zphere replied to the thread Question My idle temps are on average 60 C and I cannot get them lower.
  
  Yes, I set it to run at 100% consistently. Under load, temps range from 75-80 C
  
  Oct 11, 2024
- Zphere replied to the thread Question My idle temps are on average 60 C and I cannot get them lower.
  
  View: https://imgur.com/a/PxXVaIw Updated image with fan flow direction. Fan RPM/Rate is based on the curve shown in the original...
  
  Oct 11, 2024
- Zphere posted the thread Question My idle temps are on average 60 C and I cannot get them lower in Cooling.
  
  As the title suggests, I have higher idle temps than what I would like and nothing I tried has helped. I have seen online that some...
  
  Oct 11, 2024
- Zphere replied to the thread [SOLVED] Persistent BSOD Issue caused by ntoskrnl.exe -- Any help is appreciated!.
  
  PSU: Corsair SF1000L, 1000w, a little over a year old (ordered new from Newegg), Computer is used for pretty much daily gaming. Disk...
  
  Oct 10, 2024
- Zphere posted the thread [SOLVED] Persistent BSOD Issue caused by ntoskrnl.exe -- Any help is appreciated! in Systems.
  
  About a year ago, I built a new computer and have had BSOD issues since the first couple of weeks that I have had it. I have tried a...
  
  Oct 10, 2024
Show older items
Loading…
Loading…
Loading…
Loading…