3000 mhz

Forum discussion tagged with 3000 mhz.
  1. L

    Question Corsair RAM issues B450 Ryzen 2700X

    Hello! I am having some problems with my Corsair RAM. The first problem I had was like 5 months ago, that I updated the BIOS and when it rebooted to restart the system again (nothing unusual), the BIOS didn't like the frecuency of the RAM that I had been using all that time (XMP 3000 MHz) and...
  2. S

    Question Can i overclock my 3000Mhz ram in my MSI gaming artic h310m mobo ?

    I have just ordered my first built after years of torture by IGPU's , my budged was low so i bought an i5 9400f a used gtx 970 x2 8 gigs of ram 3000MHz the whole built costed me 900 bucks yes sadly in my country everything expessive , but i forgot that i needed a mobo that supports that ram...
  3. B

    Question Hardware Reserved RAM

    So, I’ve been scouring all around for a good day and a bit now with no sign of hope. I have the classic issue of 16GB dual channel RAM that says exactly 8GB is “Hardware Reserved” I’ve done all the thinkable fixes for it; From unticking “maximum memory” in msconfig to loosening up my CPU fan...
  4. P

    [SOLVED] How to run the cmk16gx4m2b3000c15 at 3000mhz with a b450 tomahawk?

    Hello everyone. I'm not sure if I'll buy the b450 tomahawk but if I do how can I set my ram's frequency to its max? Thanks in advance.
  5. A

    Question My RAM is on my motherboards QVL, but not working on supported speeds?

    So i bought new PC about 2 months ago. These are specs : Ryzen 5 2600 MSI B450 TOMAHAWK RAM HyperX Predator 2x4gb module : HX432C16PB3K2/8 Corsair CX650 GTX 1060 6G So, on the mobos qvl it says this memory can run at 3200Mhz, but in my case it just cant. PC gets BSOD, when i run games. So i...
  6. A

    Question Gigabyte Z170 Gaming 7 debug code C1 with Corsair RAM

    So if you see my previous thread I got a refurbished gigabyte motherboard after the one I had fried because of improper repair by Gigabyte. The were generous enough to replace with another board under warranty. But it didn't boot with my Corsair vengeance LPX 3000Mhz (CMK16GX4M2B3000C15R) 16GB...
  7. amir.bisk

    [SOLVED] Which ram speed for i5 8400?

    Hi folks Im going to buy i5 8400 with TUF h370 and 1060 O6gb I haven't decided on ram yet. some guys telling me that I had better buy 2x8gb Hyperx 3000mhz cl15. the speed will reduce to 2133. Should I change it to 2666 or let it runs at 2133? or is it better to buy 2x8 gb 2666 rams? I just want...
  8. X

    [SOLVED] Slower ram with 4 modules?

    I`ve just installed another ram module, was running 24gb oc to 3000 MHz, and after installing the 4th, performance took a big hit. With 3x8gb i was able to get 2650 on Performance Test 9.0. After upgrading to 4x8gb i only get about 2200. Is that normal? All the modules are Corsair Vegeance LPX...
  9. Gosraj

    Question Ryzen 7 2700x RAM Speed

    I'm building a new PC, and the CPU I'm choosing is, well, I think it's kinda obvious. What I do want to know though is what is the best/maximum speed for my RAM with this CPU? I'm going with DDR4 16GB, but I don't know how many mhz. Based on the NewEgg page for the CPU, it says it supports DDR4...
  10. D

    Breadboarding with just CPU , stuck in boot loop

    First time build I know you probably get 100 of these a day. But I can't find any useful information for my problem. Parts: Motherboard: Gigabyte B150M DS3H CPU : Intel i5 6500 PSU: Seagate 450G I'm currently breadboarding with just CPU , stock HSF and PSU . My Phanteks eclipse 400s doesn't...