asus prime z390-a

Forum discussion tagged with asus prime z390-a.
  1. C

    Question Asus Prime z390-A red and yellow light flashing from CPU-DRAM

    What do these lights mean? My PC also shows no display on the monitor and i don't hear any beeps(a speaker isn't plugged in if that's the problem for that). Any ideas on how to fix it/get it to boot? My parts i5 9600k Coffee Lake ASUS Prime z390-A Geforce RTX 2070 Vengence 8 GB DDR4 ram. EVGA...
  2. P

    Question Asus Prime z390-A not booting, no debug leds

    Mobo: Asus Prime z390-A CPU: i9 9900K Built in RGB lights up when the 24pin is connected I Connected 24pin, 8 pin, ram, cpu cpu cooler, case + fans, when i booted it up, PSU fans and case fans light and spins, but thats it, no hdmi display, read manual,, I have never seen these debug leds lit...
  3. I

    Question First-time Builder | [Pics attached] Motherboard Lights On But Nothing Else

    Hi there! I've plugged in the CPU/PSU, PCI-E, 24-pin, and 2x SATA power cables to the PSU. I've plugged in the power supply and powered it on, but the only thing that happens is that the lights on the white part of the mobo come on and the green PWR LED on the top right. Neither one of the fans...
  4. Thebro40

    [SOLVED] Need help choosing a motherboard

    I am gonna pair it with a i5-9600k and a rtx 2070. I am thinking between Asus Tuf z390-pro gaming or Asus Prime z390-a.
  5. ExtremelySoupy

    [SOLVED] Did I Recieve a Bad Board?

    Hello, I recently built a whole new system with the exception of a power supply and graphics card (using them from a previous build). I'm having an issue where when I try to boot from my disk drive to install Windows 10 my computer freezes on my splash screen. I have tried using a retail...
  6. R

    Question Asus Prime Z390-A not detecting any M.2 devices.

    Hello. Recently I bought a 970 Evo Plus from Samsung, and have installed it into the motherboard mentioned above. I had 2 hard drives and one SSD. When I installed, it detected but would not work properly. I installed the drivers, and after this, the M.2 didn’t get detected at all. I have tried...