Hi, I have BenQ el2870 and it was working perfectly fine until today when I turned it on, and the BenQ logo flashed after that it went black the power Indicator led was still on bit no input from both my console and tv box. I tried keeping it off rewiring etc. But no luck. If anyone can tell...
Hi everyone, well I´m using BenQ XL2411P monitor.
Within the settings of display there is an Eco Mode, I cant lower brightness more than default though.
And the other settings, the brightness is even lower than what Eco Mode allows me.
So which one settings saves more energy, and increase the...
Puzzled whay after resetting my monitor, settings are partially disabled.
Can anyone tell me how to get them all back?
Picked up a PD2700U.
So far loving the colors since have only used 1440P SDR monitor in the past. Confused about how to properly set up HDR. Should it be done using the monitor controls in the bottom right of the screen...
I keep having an issue with one of my monitors which has now been temporarily replaced with an older one till i either buy a new one or fix this issue.
For the last couple weeks the monitor will randomly shut off and the power button goes off with it (sometimes) but for example...
This morning I woke up and turned my PC on... To my surprise, my monitor was displaying this weird color lines... basically mimicked artifacting... I thought that it was my GPU but when my foot accidentally hit my table, everything returned to normal. I then got the idea that it might be a...
I am considering buying a 2K monitor. The specs I am looking for are 2K resolution, 1ms latency and 144hz refresh rate.
I have found this one: https://www.amazon.ca/gp/product/B0B3FDTV1F/ref=ox_sc_act_title_3?smid=A3DWYIK6Y9EEQB&psc=1. This one indicates it has all the specs I would like...
So I have been looking to buy a new monitor for some older consoles such as the Xbox 360/ Original Xbox One and PS3 but I cant decide between the BenQ GW2475H vs GW2480/T.
Looking at comparison sites there are slight differences but I dont know which one would be best for older gen console...
I hope you guys doing great.
I was using ASUS VG278QR with my Aorus 2080 Super with 1.4 DP port.
Week ago I decided to switch to IPS Display so I found Benq Mobiuz 2510s as reasonable option because due to shortage and high dollar exchange rate I decided this Display.
I bought it 3...
Hello again wonderfull people of tom's hardware forum,
Like the title suggest monitor corners turn dim after a second, it only happens in the right top and bottom corner and is like a triangle of what seems no backlight.
This happens in all picture modes except for Eco mode, I already figured...
Im using for 5 years now BenQ GW2270H monitor as my main display,its 21.5 1920x1080p with VA panel but i want to upgrade because its small,bad for gaming,and the viewing angles are terrible
I got an offer,give my benq + small cash for used HP 27q 2560x1440p 60Hz Free sync monitor.
I was looking at a few entry level 75Hz FHD IPS monitors from LG and Benq.
The LG monitors (example: 24MK600M) would mention like "2D refresh rate: 75Hz".
Benq ones (example: EW2480) had more details like: "3D refresh rate: 75Hz"
Please see the photo below you'll understand better:
Hello everyone. I just got myself a BenQ XL2420T monitor, and I was wondering, which cable should I get for it. My current graphics card is GTX 960 2GB. The graphics card seems to have a DVI-I Dual Link port, and the monitor seems to have DVI-D Dual Link port. Can I just buy a DVI-D Dual Link...
I recently built a new PC, and bought a new monitor, Benq GL2780.
I didn’t buy any GPU, I’m using the Intel integrated GPU, and the problem is that my monitor screen occasionally goes black for a few seconds, and I’m not sure why this is happening.
It can happen even if the CPU or the GPU...
I just got my new screen BenQ XL2411 and i can't get upper then 60Hz.
HDMI: Can't get over 90Hz
DVI: Can't get over 60Hz
Does anyone can inquiries in helping me with a solution if it happens to you or not (wishing not yet) please haha?
I recently bought a 2560 x 1440 monitor and I find the 100% scaling too small, however when I changed the scaling to 125% some apps would appear blurry e.g Asus Suite 3. I found when I went in advanced scaling settings and set a custom scaling of 120%, the monitor was no longer blurry...
This problem started a few months ago. My GPU is an RTX 2080 XC ULTRA, and my monitor is a BenQ XL2420TE (1080p, 144hz). A few months ago, my computer crashed, where the monitor turned off, but it sounded like the audio was still going (through the headphones), and it wouldn’t respond to me...
I am looking for a good color accurate gaming monitor. I will run them at 144Hz only, with best possible color mode.
After searching for a bit, I am finally stuck in BenQ MOBIUZ EX2510S and MSI Optix G241.
Both monitors comfortably fits in my budget, but I am not sure about the panel...
Hi i have seen some similar posts to this but not really good enough answers to cover my question here,i play competitive games only and i care to have up to 1080p monitor,i am thinking of buying a 360hz monitor for CS but i dont know if they current ones out there like ASUS and Alienware are as...
So my power button went out of use on this display and I cannot use it properly anymore. I have had this issue before so I had to use power button to turn screen off.
I have two monitors. Main monitor is XR3501, using DP - DP connection and 2nd monitor is XL2411Z with DVI connection...
Hey guys so I went into my display settings and nvidia control panel and realized that I cannot switch from 60hz to 144hz I have a gtx 1080 plugged in with a display port to DVI going into my benq xl2411z I had it check for new drivers and have my graphics drivers up to date and no luck kind of...
Hello guys, I have a Monitor Stand Ergotech Freedom Arm FDMHDS01. Currently, I am using Benq GW2270HM monitor on it
Now, I have bought a new monitor Benq EX2510 but it has cut out around the VESA mount and My freedom arm is not getting inside that cut out, though both have 100mm x 100mm VESA...
I wanted to buy a budget pivot monitor. I have two options in mind, Dell P2419H and Benq GW2480T. Both are almost similar but i want to choose the best from these. Also if any other options in recommendations, do let me know. Thank you!
So I just got my new monitor and this is happening. White lines go away when I shut off and turn my pc back on. Also white lines went away when I switched DP Cable but it comes back by itself after couple minutes. Before I return it, do you guys have any suggestions? Here is the pic btw
Normal lcd displays turns on itself once cpu power is turn on but in my benq lcd display I have to manually press power button on that benq lcd display to turn on the display each and every time so frustrating.
Lcd display model is benq G610hda
I have reset the display settings
So... context first, the specific monitor is a GL2440 1080p, hdmi. I got this monitor out of a local second hand dealer about 2-3 years ago. About 1 year ago I started to notice when I power on my pc the monitor started to power off after some seconds. At first I only needed to press once the...
I need a new monitor. I usually do work and gaming on my pc and I have RX 580 GPU.
Which Monitor Should I take ?
I need better build quality and colors
BenQ GW2283 or LG 22MK600M
both the monitors are same price and I want to buy from these two models
I was looking for an affordable 10-bit monitor for professional work related to Film & VFX. I found two from BenQ - SW240 and PD2700Q. I'm aware about the size and resolution differences between the two, but my main concern is the color accuracy. Since one is 24-inch and the other is...
Hi! I have a BENQ G920WA that randomly goes almost black, like a really low luminosity. If I turn it off and back on, it is ok, but after some seconds it goes almost black again.
This is the video of me turning it on then going at a low luminosity:
I have tried to get 144hz with this combo but because my monitor only has HDMI DVI and DVI-D and my graphics card only has Display Port and HDMI I was unable to get 144hz.
Until I bought an active cable to connect DVI-D to Display Port and it worked! But now I have a message on my monitor...
I have an issue thats been driving me crazy over the years which is that while gaming all screens turn black or a single color and the computer becomes unresponsive. Thus far the only way to fix it has been to restart the computer by figuratively choking it with the power button. From the...
Hello, I have a Benq G920WL and whenever I try to turn it on it instantly turns itself off and It will only turn on after I keep pressing the power button multiple times.
Is there any way I can fix this so that it turns on on the first try?