cinebench r23

Hi all I am only getting 35k on cinebench on my 13900k but i see videoes and everyone is getting like 37-40k is there something wrong with my system (hope cpu hasnt blown up) or do i just need to OC or something? Or perhaps I am deluded and the score is perfectly fine.

Hey guys, today I replaced my 10400f with 11900K with Peerless Assassin 120 SE. My clocks are fine, temps are kinda fine (50c idle, max 85 under stress), but I score awful results in every benchmarks. Cinebench 23 - 12xxx (internet says should be somewhere between 16 - 17k), all apps closed...

Recently I purchased a brand new Asus TUF F507zi and I feel some of it's benchmarks are much lower than expectation and I'm so worried about that. Should I use turbo mode | GPU: ultimate OR performance mode | GPU: Standard in ASUS Armory crate? Here are some of my benchmarks vs other user...

Hi, I was going to do some overclocking but I noticed my scores in cinebench hover around 18k-19k, and my temps reach up to 100c. I read the average is around 24k and most people don't get above 80c. I've got a good cooler, and my room temp is about 70F. I've got a contact plate, and my aio is...

I upgraded from a 3500x and updated my BIOS to the latest version and all runs well, my idle temps hover around 42c and on 100% load stays on 55c sometimes reaching 60c. PBO is enabled in BIOS and my settings are set as: PPT: 140 TDC: 90 EDC: 160 All cores: -20mV +200Mhz Cinebench R23 reports a...

Just replaced my motherboard and RAM and noticed that my performance and FPS in most games have dropped since the replacement. I have ran cinebench and TimeSpy and noticed that my CPU is getting a pretty low score (5200) and I wondered what the issue might be? Unsure what the score was in my...

Hi everyone, I need your help! I have built a pc using cpu i13700(non-k), ASRock z790 steel legend mb, asus tuf gpu 3060, and Thermaltake PSU 850w tough gf1 which run on windows 11. The pc somehow slower than I expect in Apex legends, so I have benchmark my CPU using CPU-Z, Cinebench R23 The...

I have an Intel Core i5-10600k and I ran a multicore test on cinebench r23 and the score was 8435. Is this normal for a stock i5-10600k? I have an MSI z490 gaming edge wifi motherboard and a Corsair H100i Elite Capellix XT AIO. My wattage gets up to around 100 watts. Originally I had the...

Specs: CPU: Ryzen 5700x CPU Cooler: Cooler Master MA620P Thermal Paste: Thermal Grizzly Kryonaut GPU: Radeon RX 6900 XT MOBO: Gigabyte AB350 Gaming 3 RAM: Corsair Vengeance 3200MHz 16CL 32GB PSU: EVGA 850 G2 Case: Silverstone RL06 BIOS Settings(Latest Bios & Chipset Update): PBO = On XMP = On...

I recently just got the Ryzen 9 5950x, and immediately started benching the CPU on Cinebench R23. On stock clocks, my typical score for the multicore bench is around 14,000 with temps peaking around 70-72C. I have seen people reach scores up to 24,000 on stock, even surpassing Threadripper...

I built my very first PC in February of 2021. Specs: CPU: Ryzen 7 5800x CPU cooler: MSI MAG 240G AIO Mobo: Asus Prime x570 RAM: Gskill 16GB Ripjaws GPU: Radeon XFX 6900xt Merc Speedster PSU: Super Sunflower 850W 80 Plus Gold HDD: 2x1TB Nvme drives For the first time a few days ago, I decided...

Just installed my new i7 9700 and retired my i3 9100F, I ran some cinebench R23 tests and for Multi core it got a 6800 and for single core it got a 1191. According to cpu monkey it should be getting around 8540 and 1181. So it's only performing about 80% good as it should be when it comes to...

Yesterday upgraded my CPU from an i5-4690 to an i9-10850k and also got a new Motherboard (ASRock Z490 Phantom Gaming 4/ac) I don't know whether it matters or not, but I didn't setup my PC from new, so the windows installation and all the data from my old PC are still on my harddrive. After...