Cooler Master 212 Evo

I changed the cooler on my cpu to a cooler master hyper w12 evo. Once installed the Integrated graphics on the motherboard and external graphics card is unable to display anything. I have tried using a different cpu and same issue Though it does work without the cooler attached. My thinking is...

I’m new to pc building and this my first pc so I was wondering if my cpu temps are normal. AMD Ryzen 5 2400g 3 intake fans front of case Cooler master cpu cooler with a intake & exhaust fan on it. 1 exhaust fan in the back. idle temp is at 27c When I use the pc for normal stuff it sits...

Hey, got a new system with ryzen 3600 with stock fan. It's temperature is between 36-45 when idle but while gaming and stuff it can go up to 80s and sometimes 90 degrees. I decided to buy a new cooler so I can be sure about temperature. I've read some comments about Cooler Master Hyper 212 and...

Hi there! I've plugged in the CPU/PSU, PCI-E, 24-pin, and 2x SATA power cables to the PSU. I've plugged in the power supply and powered it on, but the only thing that happens is that the lights on the white part of the mobo come on and the green PWR LED on the top right. Neither one of the fans...

I have had my Cooler Master 212 Evo running on my current system for about 5 years. It has been running fine and I have not done anything to it since I installed it other than dusting. Is it safe to re-use this in a new build that I am planning to make this Christmas? Or should I just buy...

I am deciding between the Hyper 212 Evo and the Hyper 212 Black Edition. They are both the same price on Amazon. Is there a difference in performance/noise? Are there any other important differences? Thanks! https://www.coolermaster.com/catalog/coolers/cpu-air-coolers/hyper-212-evo/ - Hyper 212...

Hello everyone! I have an good old 2600k overclocked to 4.5ghz.. ram is set to standard ddr3 1333.. was wondering will overclocking ram will increase performance on video encoding, rendering, editing? my mobo supports up to 2400mhz.. also if anyone can guide me thru the process of overclocking...