DDR3 1600MHz

Forum discussion tagged with DDR3 1600MHz.
  1. Frodo117

    Question Upgraded DDR3 Memory to 2x8(16)DDR3 sent my pc into a reboot cycle, im not sure what to do

    Hi All that can help Recently i have decided to upgrade my RAM in the second hand pc that i had bought, originally 12 gb 1x8 and 1x4. i got 2 new 8gb at 1600mhz. The motherboard only has 2 slots for ram Specs as follows: motherboard - gigabyte H81M-DS2 Original Ram - 8gb -Adata at 1333mhz and...
  2. Jerson Gonzales

    [SOLVED] Combine 1333mhz and 1600mhz

    I am currently using Intel DH55PJ Motherboard with 2ramslots which I have one 4gb ddr3 1333mhz and one 4gb 1600mhz. I'm planning to buy a new 1156 motherboard which is Asus P7H55 with 4ramslots. I have here extra 2gb 1333mhz. Is it okay to combine one 4gb 1333mhz, 2gb 1333mhz and 4gb 1600mhz...
  3. kamieniarzk

    [SOLVED] Why RAM manufacturers recommend 1.35V for my laptop when it's fitted with 1.5V sticks.

    So I have a Samsung NP550P7C-S02UK laptop with 6GB RAM 1600MHZ DDR3 PC3-12800S-11-11-F3 memory which from what I've read works on 1.5V. (it's 2GB + 4GB, the serial number of the 4GB stick is M471B5273DH0-CK0). Now I want to upgrade it to 12GB (swap the 2GB stick with a new 8GB stick) but I...
  4. Mubasher hassan

    [SOLVED] Does two 800Mhz RAM is equal to 1600Mhz

    Hello I have Intel® Core™ i5-3340M Processor in my Laptop with Single Channel 800Mhz (4GB) RAM. Currently I am thinking of 1600Mhz RAM speed. Should i install two 800Mhz or two 1600Mhz RAMS? I also want dual channel mode.
  5. F

    [SOLVED] Dell Inspiron 3421 user manual states DDR3 1600 DIMM RAM?

    I am upgrading an old Dell Inspiron 3421 (touchscreen) with 4gb RAM. While checking, I find that it has a DDR3 1600Hz DIMM RAM? I thought DIMM RAM was only for Desktops and after checking on the web- Amazon, Newegg etc all the DIMM RAM cards look 'longer' compared to my RAM card. Also, how do...
  6. M

    Question CAS9 vs CAS10 DDR3 1600 MHz

    Hello all, I'm currently running a single channel memory module from Kingston. The memory currently installed is in a single channel config and the manufacturer number is Kingston Hyper-X Savage HX316C9SR/8. Now I'm looking to purchase another dimm module which is also a Kingston Hyper-X...
  7. F

    [SOLVED] Memtest86 isn't booting

    Hey guys, so recently 2 of my DDR3 ram sticks got defect. I have only 4GB left now. So I'm getting a replacement. Corsair asked me to do a memtest with memtest86, so I downloaded it and installed it on my USB. When I tried to boot it there's nothing happening, It's giving me a black screen...
  8. B

    Question New RAM won't boot

    Hi, I game on a roughly 5-year old PC that I built in 2015. I want to upgrade the RAM from 8.00GB Single-Channel DDR3 @ 798MHz to a 16 GB DDR3L kit I purchased from Crucial on Black Friday. When I installed the new RAM, the computer got stuck in its POST cycle and the D-RAM LED came on solid...
  9. ethan206

    [SOLVED] Does my laptop support 16GB of RAM?

    I have a Dell Latitude E6520 with 8GB of 1333MHz DDR3 RAM and I want to put in 16GB of RAM in it. I recently upgraded my CPU from a i7 2640M to an i7 2760QM and while both do support 16GB of RAM, the i7 2760QM supports it at a higher clock of 1600MHz. So my first question is if my CPU supports...
  10. L

    Question Single 8gb or dual 4gb sticks?

    Hi guys, I just bought an HP Elite Convertible Mini Tower from Craigslist to play around with. It didn't come with any ram, and upon doing research, it seems that this system can go up to 32gb (PC3-12800 1600MHz). I could get a used single 8gb stick for cheap on E-bay, but was wondering if it...
  11. M

    Question 2GB 1333 + 4GB 1600 vs. 4GB 1600

    My computer is currently running a DDR3 2GB 1333 ram. I am planning to add/replace it with a DDR3 4GB 1600. Should I set it up with a total of 6GB but runs at 1333 or 4GB that runs at 1600? Also my computer is Acer Aspire M3970.
  12. Nates10

    Question Is Kingston HyperX Fury (HX318C10F/8) will be compatible to my PC?

    Hi, I want to upgrade my RAM to 16GB. However, I'm not sure if this is good to my PC. Please check my PC Specs Below: CPU: Intel Core i5-4460 3.20GHz Motherboard: Lenovo Sharkbay 90B6006GIX RAM: Ramaxel 1600 & Micron 1600 Please help. I'm not good in upgrading pc, any help will be...
  13. S

    Question RAM for HP envy 17 inch

    My laptop (hp envy 17inch)currently has 8gb ram (4gb in 2 slots), I am looking to upgrade one of the 4gb ram to 8gb. My current ram spec is: 8GB DDR3 RAM SPEED 1600MHZ FORM FACTOR : SODIMM I found a RAM that has the following specification: sty8G DDR3 1600 18661333 standard low voltage...
  14. C

    Question Will this ram setup work?

    I currently have 8gb (2x4) of ram and since I do a lot of video editing I wanted to upgrade to at least 16gb of ram. I’m wondering if it’s possible to buy 2x8gb and add them up with the already existing 2x4, so getting a total of 24gb. Is this possible? I was going to buy the exact same type of...
  15. A

    Question dell optiplex 9010 Mt ram upgrade

    i have dell optiplex 9010 Mt it comes with some low profile memories of 4x2(8gb) rams . i want to upgrade it to 16 gb rams 8x2(16gb) i have interest in kingston hyper x 1600mhz is this ram compatible with my system and will my system work properly? hyper x is 1.5 v will this work...
  16. Supershannon1

    Question Could I use one stick of 8gb ddr3 in a Lenovo Thinkcentre m58

    So I’ve got an old, used Lenovo m58 I bought off eBay And it’s got one stick of drr3 4gb and I was wondering if I could put one stick of 8gb that I have Laying around, it’s got 1600 Mhz clock speed, and it’s unbuffered, non Ecc ram, Would this ram work with that machine, PC specs: Ram: 4gb...
  17. N

    Question Are these two types of ram the same?

    Hi everyone, I have recently decided to add a little bit more ram to my pc. My current PC has 1 stick of CMZ16GX3M2A1600C10 (8gb ddr3 1600mhz i think) but the problem is I bought the motherboard and ram as a combo and I think the ram that was used was part of a 2 stick of ram combo. I was just...
  18. Larrytf

    [SOLVED] Mix Ram from same brand

    i bought a set of G Skill Ram (F3-12800CL9D-8GBSR) which is DDR3 8Gb (4GBx2) 1600MHz back in 2014 and want to upgrade to 16GB. i was going to buy another of the same set but its really outdated and the same store i once bought it from dont sell it anymore. Can i buy newer set of ram from the...
  19. Nerotic6262

    Question How do i make my new memory to work with old

    Hi i just bought a new memory and when i install it pc starts fine but after some time i get a BSOD with some memory error msg. Also CPU-Z says that memory now runs at 800 mhz insted of standard 1600 mhz. I am running 2x 4gb DDR 1600 from Kingstone mhz on Asrock 990 Fx Extream 3 Motherboard...
  20. inbam

    Question What is the difference between KVR16LS11/4 and KVR16S11S8/4?

    They're both Kingston DDR3 RAM for laptop and runs at 1600Mhz. The only difference is the voltage, one is 1.35V and the other one is 1.5V. What other difference are there with that 2? What impact different voltage has on laptop?
  21. S

    Question i7 9700k + 16gb DDR3 1600mhz works well?

    Hello, my current processor is a 2700k and I want to upgrade it to a 9700k and a new MOBO. I have 16GB DDR3 1600mhz hyperx (2x 8GB) memory and I wonder if I will have to purchase another pair of memories in order to work well with the 9700k. Is it worth upgrading to a DDR4 2666mhz, and will it...
  22. S

    Question Advertising RAM

    Hello, Does anybody know of any good places that I can Advertise RAM? The type I am wishing to advertise is: 4/8 Gb DDR3 DIMM 240-pin 1600MHz PC3 12800. This is in various different manufacturer's such as: Kingston, Corsair, Micron, Hynix, HyperX.. etc.. etc. also, is it possible to...
  23. J

    Question Overclock DDR3 1600 to 2133mhz?

    Hello! I have 4x8GB of Hynix DDR3L 1600mhz Ram (1.35v) and I was wondering if you can overclock to 2133mhz with BIOS? I'm kind of a noob at overclocking but there's a setting in my bios that says "DRAM Frequency" and there's an option to select it to 2133 mhz. I'm wondering if that would be fine...