#ddr4

I need help. I would appreciate any support as it’s been driving me crazy all day. I have just bought the crucial 3200mhz 16GBx2 ram installed them in the correct slots. They are in dual channel according too cpu z. However it says they support xmp 2 but when i go into the bios only 1 xmp...

So I have been having problems with my ram when I turn on XMP in my bios, I just now checked my compatibilities for my RAM of the Motherboard on their website and I am using ram sticks that are not compatible with it. Would this be the cause of the issue? I don't want to waste money on buying...

I wonder why after tightening timings makes my PC freeze & less responsive, sometimes without any error in Memtest86 Pro in 6 passes with no error ? ( but having better benchmark). (I use gear 2 so the latency is more than 60ns) Both at 1.3v. I have also try to 1.36v but nothing changes...

Hi All. I would like to get your help in findig a solution, or identifying the issue which causes failure after enabling XMP config in BIOS. CPU: Intel Core i5-6600K, 3900 MHz MOBO: MSI Z170A PC Mate (MS-7971) MEMORY: 32 GB (DDR4 SDRAM) 2x8 GB DDR4 Kingston HyperX...

I recently bought 2 new Kingston HyperX Fury DDR4 memory sticks (8 GB, 2x4GB) which should give my X-99A motherboard a total of 24 GB (Other two DDR4's are both 8GB, also Kingston HyperX Fury). Despite all 4 memory sticks showing up on both the BIOS and CPU-Z, Window's task manager only shows...

Guys I have a B450 GAMING PLUS motherboard from msi,and i have 1 stick of 8 gb ddr4kingstong hyperx ram instald,I own another 2 sticks of 4 gb of the same brand and speed can i place them in?

Hello, I have a very simple question. I have 16GB RAM, 2 modules. My exact RAM specs are : 2 x HyperX Fury 8GB DDR4-2666MHz (HX426C15FB/8). So I have a very simple question, do I have to buy exactly the same RAM or I can upgrade to something similar? I'm asking because I cannot find the exact...

I have Gigabyte GA-AX370-Gaming 5 mother board and Corsair Vengeance LPX 16GB memories. If I install memories in Channel B (either or both, slot 1 & 3) of the mother board then system doesn't boot. If same memories are installed in Channel A (either or both, slot 2 & 4) then system boots. In...