Display port 1.2

Forum discussion tagged with Display port 1.2.
  1. A

    [SOLVED] Will I notice a difference in my monitor if I change the displayport version of the cable? (from dp1.2 to dp1.4)

    Hello, I recently bought the Gigabyte Aorus FI27Q 27" Gaming Monitor and I went to gigabytes website and saw that the supported version of the display port was 1.2 , and that the Aorus FI27Q-P supports 1.4. However, if I upgrade to a new display port 1.4 cable, will I notice an upgrade? Or is...
  2. V

    [SOLVED] Which Output Cable Should I Get?

    I have a GTX 1060 & right now I am using a very old DVI Cable. Which is the best output cable I could get for the GTX 1060 to be able to run 1080p 144hz as good as possible? ( Monitor --> Asus VG248QE 1080p 144hz ) Thanks :) !
  3. Sable2100

    Info Asus Z390-A prime

    I recently purchased the Asus Z390-A prime and ran into a pretty strange problem that took a lot of trouble shooting, The issue was when a display port cable was plugged into the gpu the bios wouldn’t be available on start up, windows would load normally and the white VGA led would be...
  4. Y

    [SOLVED] DisplayPort To HDMI Bad image quality

    So I bought a amazon basic's DP to HDMI, I plugged it into my GTX 1060 6GB and the results were really bad. The Screen can't reach 1920x1080 as it goes off screen as well as the image quality is really bad, it's bland and blurry. Before i had it with a VGA cable but I'm getting a processor soon...
  5. P

    [SOLVED] 1.2 vs 1.4 display port

    so i'm building a new pc come this November, and everything i have looks pretty good but what i'm nervous about is the rtx 2070 is 1.4 display port and my 144hz monitor is 1.2 display port is that compatible or do i need to get a 1.4 display port monitor as well, because i cant find any at an...
  6. S

    Precision T3500 CPU Fan always on full speed

    Hi, I have a Precision T3500 which, when turned on the CPU fan spins at full speed constantly creating a lot of noise. This has only happened recently, despite no changes to software, hardware or environment. Does anyone have an idea what the problem could be? Thanx Farhan