docp

Forum discussion tagged with docp.
  1. my name is jeff

    [SOLVED] Can't get remotely close to advertised speed

    Can't run my ram at a frequency beyond 3600 Mhz even though it is supposed to run at 4400 Mhz. I tried using the D.O.C.P profile, changing the frequency while leaving CAS and voltage the same as the D.O.C.P profile. 3600 Mhz seems to be the highest I can run. I am running the two sticks in slots...
  2. O

    Question Crosshair VII/5900X RAM upgrade 64GB 300CAD, advice needed

    Hi tom's people, I recently upgraded my CPU from the 2700 to the 5900X and I thought it would be a good time to finally upgrade my RAM from the "mere" 16GB I had. The QVL from ASUS for this motherboard is way out of date (last update was in 2019 I believe), so I looked online for memory on...
  3. B

    Question Need help with new PC build

    Hello everyone, Need help with a new PC build. After very long research, I build my own PC with the below configuration. Processor: Ryzen 5 5600G. Motherboard: Asus Tuf gaming B550m- plus (Wifi). RAM: Corsair Vengeance 8GB DDR4 3600 . SSD: Samsung M.2 SSD. Power supply unit: Corsair TX Series...
  4. K

    [SOLVED] Applying DOCP to my RAM on a Crosshair VIII Dark Hero is causing an endless shutdown cycle

    Hi everyone, So recently I've had to replace the motherboard in my PC. When I apply the DOCP profile for my RAM in the BIOS (Corsair Dominator Platinum 64GB (16GBx4) 3600MHz CL14), the PC will enter an endless shutdown cycle until I clear the CMOS. The funny thing is, the profile worked fine on...
  5. Blazer40o

    [SOLVED] PC hard freezing when gaming after enabling DOCP ?

    So I got a new mobo, it's the Asus Rog Strix b550-f gaming, and I wanted to turn on the DOCP profile for my ram Corsair Vengeance Pro (2x8) 3200mhz. Everything went good, I booted in to windows11, I ran benchmarks using AIDA64 and everything seemed alright, until I launch a game and play it for...
  6. Z

    [SOLVED] DOCP shutting down my system

    Hi! Sorry if this is not the right thread, but it seemed fitting for the problem that I'm having. So, I recently upgraded my RAM to 32 GB from a 16 GB kit that I bought about a year ago. I made sure to double check the speed and timings of this new 16 GB (8GBx2) kit so that it matched with the...

  7. Question How to DOCP 32GB RAM on Asus B450M-A?

    Need some assistance please. 😊 Conditions: DOCP works perfectly with ANY TWO of the four RAM sticks, but not together, so 2133 mhz goes up to 3000 mhz. BUT - When I use more than two together, the PC keeps rebooting and then the BIOS goes into safe mode. The BIOS has been updated today. The...
  8. B

    Question DOCP Doesn't Work

    Hello all, I've been trying to get DOCP for around 2 hrs. and am stumped. I've updated my BIOS to v3211 and I can't get DOCP to work. I don't know if I would have to set it manually, but I have no experience in OCing RAM. CPU - AMD Ryzen 7 2700 MOBO - ASUS PRIME B450M-A RAM - XPG GAMMIX D10 16GB
  9. M

    Question DOCP not fully working

    Hello, https://rog.asus.com/motherboards/rog-strix/rog-strix-b350-f-gaming-model/...
  10. Joni1566

    [SOLVED] Should I turn on docp

    Hello everyone. I just finished setting up a new build and Am a bit confused about if I should change ram speed in bios My build as follows: Rayzen 5 5600x Asus tuf gaming b550m-plus (wi-fi) bios version 1401 G.Skill Trident Z Neo RGB 2x8GB DDR4 3800Mhz CL18 Kit - F4-3800C18D-16GTZN Rx...
  11. D

    Question Problems with DOCP TUF X570 + 3600x + G.Skill 3600.

    Hi guys, how are you. I'll leave my configuration right here and below related to my problem: Here is my current configuration: "Mobo Asus TUF X570" + "Ryzen 3600x" + "2x 8GB G.Skill 3600 Trident NEO" + "GPU RX 6700XT Sapphire Nitro +" + "PSU EVGA 750BQ" + WC Corsair H100i V2. The problem is...
  12. sqweeky

    [SOLVED] Default Ram 2133. Won't set up to 3200mhz using d.o.c.p, HELP!

    So I recently built my pc days ago. running Ryzen 5 2600 PNY XLR8 3200mhz 8*16 - sticked on A2 B2 Gigabyte rx 570 Asus rog strix b450-F II So I set up the d.o.c.p to 3200mhz, but when I do.. My computer won't boot up. It restarts like 3x then, the screen will show the megatrends something...
  13. V

    Question Can't get the D.O.C.P to work

    Hi guys, I recently bought new parts, but I can't get them to work properly. The Rig: MB: Asus ROG Crosshair Hero VIII Wi-Fi CPU: AMD 5900X RAM: G.Skill Ripjaws - 2x32GB 4000MHz CL18 PSU: Be Quiet! Dark Power Pro 1000W So the problem is that when I enter the BIOS and load the D.O.C.P the...
  14. A

    Question Consistent BSOD Crashes

    Hey! I just installed another two sticks of Corsair CMK16GX4M2D300C16W Vengeance LPX 16 GB totaling 32GB. I am running these on D.O.C.P. on an Asus B450-F ROG so that I can achieve the 3000Mhz advertised on the box. However, since installing them I have been dealing with BSOD crashes, in...
  15. blookmore

    Question Why I can’t change my ram from stock speeds

    I’m having problems when trying to put my ram on it’s intended speed I have Corsair Vengeance RGB PRO DDR4 3200 C16 2x8GB but it’s only running at 2133mhz so when I try turning docp on and setting it to 3200 my pc won’t boot due to memory issues any ideas on why this is, thanks
  16. 3

    [SOLVED] BSOD after enabling XMP

    About 2 years ago I built my PC. I must have overclocked it because CPU base clock is 3700MHz and up until today it has been running perfectly well at 4122MHz. Anyway, today I ran a bench to see how it's performing (because I'm thinking of upgrading GPU and maybe RAM) and I noticed that RAM was...
  17. Belugamer

    [SOLVED] Can I really make my ram running with 4000Mhz on Aorus B550 Elite?

    Hey! I was planning to build a PC with a combination of Ryzen 5600X with Aorus B550 Elite along with Klevv Bolt XR 4000Mhz The specification of the motherboard includes this Support for DDR4 4400(O.C.) / 4000(O.C.) / 3600(O.C.) / 3333(O.C.) /3200/2933/2667/2400/2133 MHz memory modules My...
  18. R

    [SOLVED] Ryzen 2700x and 32 gb GSkill 3200 mhz only able to achieve 2800 mhz on docp.

    I am having this issue with 4 sticks of gskill 3200. I have docp turned on, but can not boot at 3200 but can with 2800 as my highest. Any ideas? Also I can achieve 3200 with 2 sticks just not 4.
  19. T

    Question D.O.C.P crashing the computer on boot

    I built my first PC and my system has following specs, Ryzen 5 3600 16GB Ram (2 x 8 GB) Asus Rog B550-f Motherboard GTX 1660 Ti Graphics Card I wanted to get my memory speeds to 3200 MHz using DOCP feature. So I went into the bios and changed the profile into a pre set profile named as...
  20. S

    [SOLVED] 2133mhz on 3600 stix

    Hi everyone, I just bought two kits of 16Gb(2*8Gb) 3600mhz corsair lpx (32gb total) in hopes of gaining some performance in productivity software as I've just been brought onto a dev team. But as the title states, I cant seem to get it to run at even 3200mhz. I have DOCP enabled but no where can...
  21. EfeKamil

    [SOLVED] Memtest86 DOCP

    So long story short, to make sure that my memory wasn't causing problems on my pc, i did a memtest with DOCP on (3200mhz) and it spitted out 12 errors in total. Once I turned DOCP off (2133mhz) no errors. What should I do? Thanks. 2600x/TUF 450 Plus BIOS 2406/2*8gb Corsair Vengeance Pro RGB...
  22. dhruvky94

    [SOLVED] Ryzen 5900x randomly crashing

    Hi, I recently build a new system: CPU: Ryzen 5900X (Stock) Cooler: NZXT X63 Ram: GSkill Tidentz NEO 3600MHZ SSD: Samsung 1 TB EVO PLUS GPU: RTX 3090 FE (Installed in PCIE first slot with Gen 4) Motherboard: Asus Crosshair VIII Hero X570 (Bios: 2311, I have tried will all the new BIOS and...
  23. H

    [SOLVED] Not sure if it is safe to use XMP/DOCP on my setup

    Hello, Recently I've been looking at enabling DOCP on my setup, mostly because my PC seems to be having issues when it comes to playing games. Typically games will freeze for a short moment every 15 seconds or so, I ran a user benchmark and checked in my BIOS and sure enough it's not enabled...
  24. simton4

    [SOLVED] Can't get D.O.C.P to run at advertised speed

    Ryzen 5 3600 Asus ROG B550-F Gaming (Wi-Fi) Gskill Ripjaws 3600mhz CAS 16 Hi I was originally able to get advertised ram speed by enabling D.O.C.P overclock tuner profile which had DRAM voltage at 1.35V. However, after unplugging PC while running it wont post with these settings. It now runs at...
  25. dansamueltutor

    Question 4x8GB RAM won't run at 3200mhz

    I just bought two kits of Corsair Vengeance RGB Pro 2x8GB 3200mhz (total of 32gb) and upon testing I am able to boot with 4 sticks running at stock speed (2133 mhz) but when I activate the XMP/DOCP in the bios to get to 3200mhz, when I boot, my system unit just keeps restarting without display...
  26. G

    [SOLVED] ROG STRIX X570-E - System crashes with 3600mhz RAM DOCP enabled

    ###Troubleshooting Help: What is your parts list? Consider formatting your parts list. PCPartPicker Part List Type|Item|Price :----|:----|:---- CPU | AMD Ryzen 7 3700X 3.6 GHz 8-Core Processor | $279.99 @ Amazon CPU Cooler | Cooler Master Hyper 212 RGB Black Edition 57.3 CFM CPU Cooler |...
  27. IagoNO

    [SOLVED] Enabling DOCP Crashed BIOS

    So, I just got an ASUS B550M-PLUS Motherboard. Before I was using a Gigabyte B450M Motherboard and having issues enabling XMP I tried everything I could think of, I figured I'd try a new motherboard and I felt like i went to cheap on the first MB I had to borrow a friend's CPU just to Flash the...
  28. D

    [SOLVED] New pc won’t boot using xmp...

    Built my first pc in a long time. The system booted fine until I changed my ram speed by applying DOCP to get advertised ram speeds... They are on 2132mhz by default and should be 3600mhz. I left everything else on auto and haven’t overclocked any other component. I ran memtest86 on the default...
  29. sony400

    [SOLVED] DOCP doesn't work.How to set manually?

    Hello! So i got a this new build,everything is perfect except one thing. The problem is that the DOCP for the memories doesn't work and when i set it to 3200 auto ,the system restarts and i got no boot,the only option is to revert changes. I would leave it at 2133mhz but i realized that the...
  30. B

    Question Docp crashes my computer

    I just recently bought 32GB of 3200 DDR4 (Gskill Ripjaws V) to go with my Ryzen 7 3800x and Asus pro ws x570 ace mobo. I noticed that I was only getting about 2199 MHz instead of the advertised 3200MHz. I did some research and found out I needed to enable the Docp. Upon enabling it my computer...
  31. JDEE777

    [SOLVED] Asus B350-F D.O.C.P failing

    First off I’ll explain what I’m working with Ryzen 7 1700 Asus ROG B350-F Gaming GeForce Gigabyte 1080 GSkill Ripjaws 2x8GB(16GB) 3200 DDR4 I just updated my bios today to the latest Every time I select D.O.C.P and save instantly my mouse and keyboard turn off, my display goes away, my...
  32. Z

    Question F1 boot error after enabling DOCP and ram wont run above 2400Mhz

    I've previously made a thread about this with no luck fixing my problem, but now that I know a bit more I hope I can provide enough information so that someone can help me. My issue is that im trying to get my ram to its rated speed (3000Mhz) but for some reason I can only get it up to 2400Mhz...
  33. Pcstarter

    [SOLVED] AMD CPU and RAM questions

    Hey! So I just got my new rig and a few questions came up: (specs) CPU: Rysen 7 3700x MoBo: Asus X570 TUF Gaming Plus RAM Patriot Viper Steel 16GB 3600Mhz Can I just turn on the DOCP without having to change any other settings/voltages? and Can I just use the AMD Precision OverDrive with the...
  34. Makowh

    [SOLVED] Won't POST on DOCP after RAM upgrade

    Hi everyone, So, I upgraded from 2x8GB Corsair Vengeance LPX 3200Mhz to 4x8GB Gskill Trident Z Neo 3600Mhz, it booted well and could run a Cinebench test, but next time I turned the PC on, it cut power and rebooted on a loop before POSTing, until I turned off the DOCP profile (Asus' equivalent...
  35. Tony1337

    Question XMP/DOCP Quirk R7 3800X, Crosshair VI Hero, 16GB Ballistix

    Hello, I've recently built a new system with a R7 3800X, Crosshair VI Hero, Crucial Ballistix 16GB 3200 CL16 (BLS2K8G4D32AESEK) and with latest BIOS Update and Chipset Drivers. When I set the XMP/DOCP profile in the BIOS it will boot with the profile active, however if I boot the system from a...
  36. R

    Question D.O.C.P cause code 04 on shutdown?

    Ryzen 2700x Asus rog crosshair vii hero 16gb 3200 ram gskill trident Z Rtx 2080 Ssd Samsung 970 pro 500gb 2x Seagate 2tb EVGA 850w psu So recently when I shut down the pc , everything goes off (monitor keyboard) but the pc stays running with code 04 , did research and tried everything but...
  37. P

    [SOLVED] How to enable docp from asus prime x470 pro bios?

    Hello everyone. I will be buying a 2600x and the asus prime x470 pro and I need to know how to run my ram at its maximum frequency. I've heard that to do that, you need to enable something called docp. How do I enable that? Thanks in advance.
  38. CBunn

    Question I installed an AIO, now I cannot boot with DOCP turned on.

    Hello, I just upgraded from the stock cooler provided with Ryzen 7 2700x to the H115i Platinum. After doing this I went into bios and set CPU fan to ignore and enable the AIO pump. Saved changes and reset then my system posted into safe mode. I have cleared CMOS and reset all defaults and tried...
  39. G

    [SOLVED] Enabling docp profile for ram clock

    Hi guys, i want to overclock my ram,and i was wondering can i just go to bios>ai tweaker>select docp and then enable docp 3000mhz? Can i enable the first docp profile(3000mhz) or i should enable second which is 2667mhz? Do i need to run any kind of memory test, and if yes, which one(free if...
COMPANY
RESOURCES
FOLLOW