dual channel ram not working

My specs are: cpu: i3-4160 motherboard: MSI H81M-P33 gpu: Nvidia Geforce GT 630(planning to change swap it with an RX 580) psu: 750 watts The ram is called kingston hyper x fury 8gb ddr3 1600mhz. The part number is HX316C10F/8. I got my pc prebuilt and I really want to upgrade it to play some...

Hello, Around a month ago now, I built a custom built PC with new components ordered online. I ordered 2 RAM sticks (8gb each). Ever since building it, I have been having issues constantly with the computer. Usually, it starts with a game repeatedly crashing (this happens randomly from 10-60...

Hi, I'm facing an Issue where, when my windows load my display goes off says no signal, sometimes it work for 5-10 mins then shows no signal message and my system doesn't shuts down all CPU fan, Cabinet fans, PSU fan and GPU fans keeps running, when I try, press and hold power button it still...

Hi i have 2x4gb ram (kit) https://www.amazon.com/Ballistix-Single-PC3-12800-240-Pin-Memory/dp/B006WAGG14 that can run up to 1600Mhz, my MB is https://www.asrock.com/MB/AMD/760GM-HDV/index.asp that can run 1600 Mhz ram but my windows say 8gb (usable 4gb) if I use auto setting in bios to auto...

Hey guys lets see I bought 2 ram stick 8GB 2666mhz Adata xpg gammix D30 and since im use them in dual channel in my motherboard gigabyte B450m- DS3H it brought problems like freezing my pc for a while then "refreshing" and starting again a lot of times until goes to blue screen saying the...

Recently I downloaded CPU-Z to check if my RAM was correctly installed because it was underperforming, and I discovered that it is set to single channel mode even though I had 2 sticks om RAM installed. When I launch BIOS, it says that they ARE in dual channel mode, but CPU-Z still says it's in...

I am rather stumped by this one. I have been building PCs for years but only recently started CompTIA+, it was while studying this that I realised I never checked the memory configuration in the motherboard's manual when I did my current build. Ran CPUZ and low and behold, my 2 low profile...

hello, i'm trying to make a upgrade to my pc and i so far have gotten an i5 9600 K and a new auros elite Z390 board, i wanted to use my old corsair vengeance LPX cmk16gx4m2a2133c13r since it is DDR4 but i can only get it running at single slot, whenever slot 3 or 4 is engaged the computer gets...

When I put my ram in dim slots 2 and 4 my pc does not boot up and my led fans starts to flicker. 1 and 3 also don’t work and think the motherboard has an issue. I recently just bought everything for a upgrade and when I installed it, my pc won’t boot up in dual channel but only single...

Hello, I bought a new ram for my old computer. But when I put only a the 4gb ram (new) it will open a bit and automatically turn off. But if I put 2gb ram (old) it will be boot up so fine. Also, I experimented to put them together and it boots up but the problem is the bios only detect 2gb ram...

I have GA-G41MT-S2 (rev. 1.3) motherboard ,it have 2 ram slots of ddr3 I already had 2gb ram(1333mhz) and later I fixed another 2gb ram (133mhz) It was showing memory runs at dual channel interleaved at boot up My computer worked fine till 5th time I ran it at 6th time it started getting...

So the other day on my Sony VAIO SVE14A35 I noticed that my 'c' key was typing 'v' every time. Didn't really do anything out of the ordinary, although I did visit a spam link for kicks that was skyped to me (a webcam site), and I did notice the problem soon after that. Honestly I really doubt...