Hi,
I have a Gigabyte Z370 Motherboard with 2x 8GB XPG GAMMIX D35 RAM and i5-8600 CPU. I've tried to run in 2 channel configuration but the PC will not boot no matter what slot configuration, with 2 sticks.
My main concern is that it won't POST even with a single stick in slots DDR_4, DDR4_2...
I've been using this PC for approximately 6 months perfectly well from Jan to June. One day, it failed to POST, so I took it to the store. They diagnosed the issue as a malfunctioning RAM module, replaced it, and the PC booted up fine. It worked perfectly well for the next 6 days, but on the 7th...
Hey guys, I've been pulling my hair out over this new ram I bought last weekend. I used to use a single 16 gb stick of patriot VIper DDR4 ram at 2400 mhz. I recently sold that and bought a 16 gb set of Corsair LPX 3200Mhz. I've never had this much trouble with my computer. I put in the kit, and...
Hi,
Which ram slot should i use 1&3 or 2&4?
I'm currently using 1&3 is that okay?
Ram i'm using: Hyper X Predator 8 GB x2 3200 MHz.
CPU: R5 3600
GPU: 1060 6GB
Super nooby but please help, am only young. I already have 2 x 8 Gb HyperX Fury Black DDR3 - 1866 sticks running in dual channel. I recently won another 8 Gb dimm of HyperX Fury Black DDR3 - 1600 ... Was told it would work but system will power up, chill for about a minute then switch off and...
I'm getting some trouble at unleashing my full RAM after a change of CPU, already tryed going back to old CPU testing and problem still going on.
Well in the PC bios it only shows 8gb RAM installed, but at control pannel i get 7,98 usable from 16GB.
Already tryed eraser on the ram pin...
Hi. I have kingston hyperx genesis on Gigabyte Technology Co. Ltd. B85M-HD3 R4 motherboard . Will the kingston hyperx savage work with my ram and motherboard if voltage and latency are the same ?
My ram :
Hyperx Genesis ( my ram )
Kingston hyperx savage :
SAVAGE
So I have been running a system on an Asus Maximus VIII Ranger for some time with no issues. Recently I decided to upgrade some so I replaced my old 1060 6GB GPU with a 1080ti and after that I bought a G.Skill TridentZ 32GB (2x16GB) (F4-3200C15D-32GTZ) set to upgrade the RAM. I checked with the...
thnx for paying attention. m going for a dual channel memory setup.these are the ram sticks - Corsair Vengeance 8GB DDR4 LPX 2400MHz C16 RAM and ZION 8 GB DDR4 PC 2400 UB DIMM-(ZHY24008192)DESKTOP RAM. why bother with two different brands? one of them is quite cheap compared to the other. my...
Hello,
Recently i just bought a 1070 and i'm getting lower fps than expected, 25-30fps lower than the benchmarks using the exact same hardware
At first i thought my i5 6600k was bottlenecking the gpu
After searching the internet i found out that the problem was that I'm using one 8GB DDR4 memory...