Hi, I just finished putting together a PC with an i7 8700K with an AIO Water cooler and the cpu temps are a constant 24-25C on almost all cores.....is that very good?
Also, can I lower the fan speed to decrease noise issue just enough so CPU is still below 35C Idle temp?
Fans are quite loud...
So I am a noob when it comes to building a pc and this is my first ever PC build. I am trying to inlcude everything possible for a COMPLETE gaming PC in this build. My budget is 1K and this is what I have come up with so far:
Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler...
Hello. Can someone please help me.
Will PC games handle much better on Windows 10,rather then on Windows 7 or 8 ? like will they performance better,increasing FPS,no FPS DROPS (or reduced) in some games..etc ?
Would I be able to connect 2 PC's together via Ethernet while still using the on-board WiFi on each to provide them with an internet connection? The reason I ask this is because I want to be able to use Steam's In home streaming to its full potential, and reduce any wireless induced latency, but...
Hey this is my first time overclocking and I need some help. Im overclocking my 6600k to 4.6Ghz and voltage at 1.35, this is the highest stable overclock I have achieved. When When I go to 4.7Ghz I get BSOD and I have tried multiple voltages at 4.7 which none have worked. I am using a S340 and a...
Hi im using this case : http://secure1.ncix.com/products/?sku=76574
And this Cooling unit : http://secure1.ncix.com/products/?sku=104791
Now what i want to know is wich side my fan should be oriented :
Or if you got anything else to propose ?
This is all my stuff in my...
Hi guys im building a new pc and im not sure which motherboard to choose im between the MSI Gaming Z170a gaming M7 and the Asus z170-a. which one should i get?
I am new to the "computer world". I would like get some advice for which hard drive I should buy.
So i recently bought Ram and its called the
Corsair Vengeance DDR3 8gb (1x8gb) and my Motherboard is the Asus P5P43TD Pro
and i put the ram in the ram slot and i when i start up the computer all i get is a black screen with the fans running
I am currently in the middle of designing my own computer case but I've gone for a different approach compared to the usual style for cases, I was wondering for opinions on it and if it is possible for me to post an image on here of the basic design for it
Hello, this is just a Build I put together with a friend, I just wanted to make sure it was good for the Price before I went out and bought it! Any suggestions that would make it better would be appreciated! Thank you
PCPartPicker part list / Price breakdown by merchant
CPU: Intel Core i5-4590...
This is my Office setup, its an Lenovo ThinkStation. Its on Windows 7, i7 4770 Haswell. Mainboard is a Lenovo Sharkbay. Graphic card is a NVIDIA® Quadro® 410
Now, I am trying to connect three monitors, and i have been able to make two monitors work perfectly well.
One of the Monitor is...
First of all my spec is-
window 7 ultimate 64 bit
Nvidia 660 Gt
4 GB ram
Intel i5 processor
Here is my problem- when I play sleeping dogs on low setting it is giving me very bad fps and game is so laggy then I tried to run it on ultra low but still lags now to do can you tell me graphics...
Needing a better home networking solution
I started researching ways to improve my home network when my IPAD started dropping it's internet connection and had trouble loading pages. And also movies on my Netflix trial
had buffering/loading issues.
I could probably live with my non-blazing...
Would be grateful if someone can assist.
I wish to highlight the column heading and row label if a cell within a table is selected.
Excel 2007 example of what I want -
Column Headings are in cells C3:J3.
Row labels are in cells A4:A56 and B4:B56.
Data is in cells C4 to J56
eg if cell F7 is...
Hey guys i need your opinion on this build.Feel free to type anything you think off.And i'm still not sure what case to choose.I have the monitor,hdd,optical drive...all that stuff.The list : http://pcpartpicker.com/parts/partlist/
Hello Guys/Girls im wondering if somone can give me a little help here, i love PC's but haven't a clue when it comes to compatible parts etc. I have around £250 - £300 to spend on some new parts.
This is my current spec of my PC
Intel Core 2 Quad Q6600 @ 2.40GHz 30 °C
After months of research I have finally picked the parts I believe are the best for this build. But any last thoughts or suggestions from you guys would be great:) I am trying to spend the least amount of money as possible for the best gaming experience btw:)...
I am new here so I apologize if I have asked the question in the wrong thread or anything like that but today I just ran a scan and found that I had 11 driver updates!
I had heard someone saying about the drivers that "If it ain't broken don't fix it!" so I am hesitant to update all so can you...
Hey guys, I am currently looking at building a PC for university and abit of gaming for around $1000. I just wanted to get some advice on the following build.
- 1 × Antec X1-E Mid-Tower Gaming ATX Case
- 1 × NZXT Sleeved LED Kit 100cm Length Red
- 1 × AMD A8-5600K Black Edition 4-Core...
i am planning to upgrade my pc soon so i want to change my motherboard,processor,power supply etc
here are the things i want to change it to:
motherboard: asus M5A78L-M LX V2
processor: AMD Athlon X2 270
power supply:Antec Basiq Series VP450P 450W
case: cooler master n200
ram: Corsair DDR3 4 GB...
Archived from groups: microsoft.public.windowsxp.games (More info?)
I have read all the messages about this problem an tried everything on them,
but I still have a problem. I get that FATAL ERROR thing where it can't
enable direct 3D. Hardware accelleration is full, All the video tests in...
Archived from groups: microsoft.public.windowsxp.general (More info?)
I usually use Nero for burning multisession or single-session data
dvds, but I thought I'd play around with XP's builtin burning.
I want to use it for DVD+RW discs since I've had quite a few times when
Nero burned RW's don't...
Here's the situation, I have two network cards in my Windows 2003 RS2 (Small Business) and two routers, I plan to have it set up so that we have a fall-back if the internet on the primary router were to drop out or loose connectivity to the internet, so that we will not loose connectivity...
I currently have networked two computers
here is some of their relative information
ASUS P6T (Using OnBoard Gigabit LAN)
Windows = Windows 7 64BIT
ASUS P7H55-V (Using onboard Gigabit LAN)
Windows = Windows Home Server
Using USB Cable Modem on Windows 7 as well
Ok now problem is I...
Archived from groups: microsoft.public.windowsxp.basics,microsoft.public.windowsxp.network_web,microsoft.public.windowsxp.setup_deployment (More info?)
I have to configure network connections on a quite old laptop. (64M RAM,
I go to network connections and click:
Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)
I have in the past day or so hit a problem that I can't explain or fix. Once
I have use my dial-up, done what I need to do and then diconnected from my
ISP, the system repeatedly and automatically redials. When...
Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)
I have a problem which seems to have only just appeared as I have made a
fresh install of Windows XP (pro). When I look at certain files with Windows
Explorer, the icons appear greyed out. I have set "view" to show...
I am replacing an antique Linksys router. All the new routers are G or N. I run two laptops, 2 Playstation3, a new XBOX360, Nintendo Wii, etc..What the heck should I be looking for besides a life? N or G?
I need to keep surveillance on two separate remote locations, each on a different continent. They're both indoor locations and have broadband. One of these setups should be fully bidirectional so I can see them and they can see me, while the other location is unidirectional so I can see them but...