EZ Debug Led

Forum discussion tagged with EZ Debug Led.
  1. kazachoki

    Question MSI B350 Tomahawk Ez Debug VGA led

    Hello all, Today I unintentionally hit the case of my PC with the edge of my thumb while I was holding a stone (that still hurts a little :)). The computer was working and the monitor screen went dark. After that I was unable to boot. The CPU and RAM ez debug leds were shining so I reseated...
  2. U

    Question CPU, GPU, RAM, I have no idea. EZ Debug LED is no help. Posted here before.

    Last summer, I had my first issue. I was playing Subnautica when the thing crapped out completely. EZ debug LED flashed CPU, then VGA, then DRAM as it rebooted. Thought at first it was an overheat issue because the cpu fan wasn't working properly - but then it still crashed. Then I tried...
  3. U

    Question Problem with MSI b360-a pro motherboard?

    Hello! I have been having a problem with my computer lately. It will not even reach pre-boot stages. The EZ Debug LED makes the CPU light flash once, then the DRAM light turn on for a few seconds, then will automatically turn off. Immediately after, the CPU light will flash again, and then turn...
  4. V

    Question debug led cpu blinks once, doesn turn on. Only switched cases

    I just switched all my components to a new case. ( from masterbox lite 5 to lian li pc-011) Everything worked fine with my old case but it doesn´t boot with the new case. Got an msi b450 tomahawk with an ryzen 5 2600x The debug LED only blinks once on the cpu and that´s it. I build it myself...
  5. R

    Question Random EZ Debug Red CPU LED On Boot

    Hi, I recently built my 1st ever PC and was very proud off myself as everything seemed to be working fine. I thought too soon. Every, say, 1 in 8 boots from shut down, the Red CPU EZ debug LED comes on and stays lit as the PC begins to boot into Windows 10 and then the PC shuts down. However...
  6. K

    Question I installed new ram and now my monitors say no signal.

    I recently bought new ram (vengeance lpx 16gb (2x8gb). But when I put it into my pc for some reason my monitors and mouse and keyboard wouldn't light up. And the monitors say no signal. I tried doing a bios reset but it didn't work. On the inside are some ez debug lights. When I start up my pc...
  7. L

    Question What could be my problem?

    So this morning I turned on my 6 month old pc, but instead of booting to windows I got nothing on the monitor. All the lights, fans and cooling pump turn on as normal, but the cpu debug led is solid red. The Msi manual says that it "indicates CPU is not detected or fail." Also the system won't...
  8. D

    Question Ez debug led cpu

    So I recently built a budget computer and after using it for less than 4 weeks I wake up today and it doesn't boot. Nothing on my monitor. On the motherboard the CPU ez debug led is solid white and I don't know what that means. I have tried reseating my CPU and checking for bent pins but there...
  9. I

    [SOLVED] EZ debug cpu light and ryzen 3600

    Specs are as follows: - Ryzen 5 3600 MSI b450m gaming plus 16gb RAM Rtx 2060 I was building a brand new PC and I knew I would have to update the BIOS first so I did using the BIOS flash button which seemed to be successful. Afterwards, I built the computer and when trying to boot, it...
  10. Z

    Question Computer automatically restart at the most random moments

    Hi everyone, I have build a computer 2 years ago, and everything in the computer worked perfectly for two years. A few weeks ago the computer shuts down and restarts at the most random moments (while playing games or even while searching on the internet). I use Windows as os, and that's not the...
  11. P

    Question EZ Debug Light on VGA

    So here is my situation: Built my first rig a couple weeks back, got it up and running no problems and been playing and loving the PC Master Race ever since. I moved dorm rooms for college and METICULOUSLY moved my computer, gently placing it in the box the case came in, and then carrying it...
  12. D

    Question Motherboard ez debug led shows 36and37

    Hello guys My mobo ez debug led keeps showing these codes(36 and 37) and switching between them I searched for codes in my motherboard manual And it says: PEI Progress codes 36:CPU post-memory initialization. System Management Mode (SMM) initialization 37:: post-Memory System Agent...
  13. Question PC crashing, Black screen , 100% fan speed gpu , debug led cpu light up and hard-locking

    Hi , 2 months ago , i bought a new PC Cpu: AMD Ryzen 2600 Gpu: MSI Geforce GTX 1060 3GT OC (3GB) MOBO: MSI B450 A Pro Ram: ADATA Gammix D10 16GB (2x8GB) DDR4 PSU: Segotep H9Plus+ 520W 85% And after a week or two.. i started to see a problem The problem is : After 3 or more hours , of playing...
  14. C

    Question PC does not boot properly, need EZ Debug LED clarification

    Whenever I try to turn on my pc, nothing but my motherboard LEDs turn on. No display or fans. I have an MSI X470 Gaming Plus motherboard and it has this EZ Debug LED feature that may help on figuring out the problem. When I turn it on, the CPU LED turns on for a moment then turns off. The DRAM...
  15. Wood123

    Question New motherboard, infinite restarting 7 secs after turning on

    Hello, my friend replaced his old motherboard with a new "MSI Z390-A Pro" but after plugging everything in and starting it, it boots up for around 7 seconds before stopping and trying again. We noticed the "EZ Debug LED" lights, and we can see that it successfully gets past the CPU, but a few...
  16. C

    [SOLVED] Ryzen 3 2200G Post Issues

    So I overclocked my brand new R3 2200G at 3.75 GhZ and the graphics at 1.4 GhZ ,a pretty mild overclock with the stock cooler, (as I've seen many people go as far as 3.9 GhZ on and 1.65 GhZ on the graphics). I was gaming and ,out of the blue, got a blue screen ,for a system task I can not...