fios

Hello, I have come across an issue in which only one of the two Ethernet ports in my apartment are functioning. I have attached photos of both ports as well as the hub in my entryway closet. I wish I wire my PC to my internet for wireless VR content and have had many bitrate issues. If you know...

Bought my in-law's house last year and inherited their FIOS setup. I'm having trouble getting a good signal throughout the house due to its size (roughly 2700 sq ft). I pay for 1GB speed which is great on the hardwired devices and those close to the router, but in other parts of the house not so...

I have Verizon FiOS and am using my own router. Internet speeds have been about 100/100 vs 300/300 plan. Verizon says it could be my router and wants to send a tech for $99 service call. I'd like to do a speed test bypassing the router. Could I remove the FiOS to Router Ethernet cable and plug...

I got a eero mesh system last week. After setup everything wireless in my house appears to be working just fine. The problem is I have several hardwired computers which no longer talk to the wireless printer. I have Verizon FIOS for my ISP and they use a 192.168.1.x network and the eero uses...

I have Fios Gig service. I bypassed g1100 completely and use Google Wifi as main router so ONT to Google Wifi. Out of the Google Wifi ethernet out to unmanaged switch. From unmanaged switch go to another Google Wifi access point. Scenarios: Laptop connected - directly from ONT - 96Mbs -...

I used to have Google Home’s Wifi mesh system but I recently switched to Orbi. Orbi mesh points don‘t have ethernet ports and I was wondering if I could use Orbi and Google Home mesh systems at once. (I have Verizon FIOS 300mbps wifi, if you’re wondering)

Today I got Fios gigabit internet. My desktop PC that has a MSI 970A-G43 Motherboard which I think is supposed to support up to 1000Mbps but I'm only getting around 300-400Mbps download and 600Mbps upload on an Ethernet connecting with a Cat6 cable. The technician who installed Fios connected...

I need some suggestions on what to do. My computer isn't booting up at all. I'll give as much information as possible. PC specs: ( https://pcpartpicker.com/list/bjVXD3?fbclid=IwAR1i4CSrW7LJpsGHI95wW-rZiByj1BjYHUu1cPpn0GqD0p3mJo0OTeFV_Jk ) It's running windows 10 and has 4 cooling fans also. I...

Alright, so I just now put together a new system and was running it for a while with the side panel off in case I encountered any problems. After about 2 hours, the CPU pump on my AIO liquid cooler started making a very audible humming noise. The pump is plugged into my CPUFAN header, and...

Hi people I recently purchased a msi z97 gaming 5 mobo and installed a m 2 intel 600p ssd into the m 2 slot on the motherboard. I installed win 10 onto it in uefi mode and my sata settings in bios is ahci. when I go to system check in the bios It does not see the m 2 card as being installed. It...

Hi Folks, I need your suggestions in building my new PC. I already have a PSU as CM GX-750 & a HDD 1GB Seagate SATA and currently using i5 2400s with GTX 560Ti. I would like my new PC to run all the upcoming games at Full HD 1080p with Ultra or Very High settings. 4K would be a plus if possible.

About four months ago my PC would not turn on, but I had no time to fix it because I was off to school once more. Now that I am home for break, I figured I would change the power supply. With the power supply installed, the power LED lights on the front are on, as they would not turn on with the...

Hey guys, I bought a Sapphire Dual X R9 270x and I tried to install it but it is not working correctly. I first turned off my PC. Then I took out the VGA cable from my mobo and used the adapter in the box to connect it to the r9 270x. after that, i put the gpu in the x16 slot in my mobo and...

right now I have ssd sumsung evo 850 120 GB which ill instal my windows 8.1 on it also I have wd20ezrx green 2 tb which ill use it for my media and programs now I want to buy also the western digital blue WD10EZEX 1tb to use for my games (I don't have it yet ) now can I instal my OS on my ssd...

I am trying to print on an Epson fx2190 wide body dot matrix printer. I need to print these little labels that are used in our factory. We have been using our legacy system and a high speed impact printer but need to move the operation over to a PC with windows 7. Epson had a driver for...

Hey all, I've got a 280x, and 4 displays. I have two displays attached to both of the DVI ports on my card (neither of them have adapters, just straight DVI), I have one display attached with HDMI, and lastly I have a VGA display attached with a VGA to mini-displayport. All of these displays...

My computer has a ssd 120 GB fastest is a SSD