If you could get a 1.4 GHz CPU with 24 cores, a 2.8 GHz one harboring 12 cores or a 5.6 GHz one with 6 cores which would be your ultimate choice?
I personally would go for cores over cycles. The impalpable beauty of more cores resonates thoroughly through lesser heat dissipation and curbed...
i have a big problem with monitor !
I need a monitor without ghosting problem
Of course, I know that monitors that use technologies such as ulmb, lightboost, etc. are better
But I don't have the budget to buy those monitors
Now I have a main question about choosing a monitor
To solve the...
So, I only have a single stick of RAM on my PC which is a DDR4 3200Mhz. But it shows up in CPU-Z as 1599.6Mhz and on Task Manager it says the Speed is at 3200Mhz.
I have currently set the XMP Profile to Profile 1 in my BIOS.
I would like to know your guy's thoughts if this is...
Hi there, I am stuck at 2133 mhz, I can enable xmp profile, however my games crash about 5 minutes after playing with xmp enabled, what can I do?
If you had to swiftly decide between running a system with more cores at lighter frequency or a system at higher frequency harboring less cores what would your decision be?
12 cores @ 2 GHz
6 cores @ 4 GHz
I would ascertain in the affirmative my inclination toward the Processor...
My CPU supports ram speed up to 2666mhz, is there a point in upgrading to 3200mhz, are there any benefits going above 2666 ( mostly regarding FPS, but other stuff to)
Full pc spec:
RAM: G.Skill Ripjaws 2133mhz cl15 (2x16gb)
Cpu: i7 8700k cpu info
Gpu: MSI 1070ti data sheet, next week...
I've installed some new XPG D50 sticks to my build, 4 of them to be specific (4x8gb) but I can't seem to get my system to boot at 3600mhz, as rated. Here is my setup specs:
MDB: ROG B450F - Gaming
CPU: Ryzen 7 3800x
GPU: ROG Strix RTX 2060
OS: Windows 11
I did try setting my MDB...
I have 2x2 questions about RAM that I can't find answers to....
1a) If a MoBo supports RAMs of 3600MHz via overclocking, but the CPU only supports RAM speeds of up to 3200 MHz, is it even worth overclocking the RAM anymore?
I mean, will the CPU not hinder the use of overclocking?
I'd like to ask for your advice regarding my issue detailed below.
My specs are the following:
AMD Ryzen 5 5600x
RX 6750 XT
ASUS B450 Plus-II mobo
G. Skill Aegis DDR4 2x8GB 3200 Mhz
1TB SSD (Samsung)
Seasonic GX 650 Gold PSU
At first, the RAM sticks were set at default 2133 Mhz...
In FurMark, I get an average of 169 FPS with GPU Benchmark 1080p. The GPU frequency during testing in Furmark does not exceed 1410 Mhz, judging by the graphics. When viewed in GPU-Z, the frequency drops from 1740 to 1410. If I turn on the 720p test, the frequency rises to 1515 mhz. In MSi...
Since the i5-11400 supports it, I went into my mobo's UEFI and bumped the DRAM frequency from the standard 2666MHz to 3200MHz..
The machine booted up fine and is, up until now, working fine.
No crashes, no weird behaviors...
I know it's just a 534MHz boost... but I thought why not?
Can I keep...
I've recently bought a pair of G.SKILL RIPJAWS V 8GB 3600mhz RAM, and I have a Ryzen 3 2200G and a MSI A320M PRO-E. After I installed it, I checked my task manager and saw that it was only running on 2133mhz and I checked in BIOS and the DRAM Frequency was set to auto, the A-XMP profiles had...
My understanding was
Speed Select Technology (SST) - Incorporating SST-CP/BF/TF where specific cores clock higher and reduce lower priority, P1 of specific cores increased and reduces for others and high turbo frequency P0n reduces for others respectively. What exactly controls this?
I have always thought that different frequency rams would always run at the lowest ram's frequency i.e. having a D3600 and D3200, all ram would run at 3200.
My CPU-Z pictures above seem to contradict this idea. See columns XMP-3200 and XMP 3596 (1600MHz is for 3200, and 1798 MHz is for...
Firstly, I will state my specs:
Intel i7-10510u with Intel UHD 620 graphics
AMD Radeon 610 dGPU
256 GB Kioxia SSD
I have basically observed an issue where the single cores do boost all the way to 4.9 GHz and when under a multicore task(like video rendering on handbrake), the...
BTW i have 16gigs (8gig at 2933 and other 8gig at 2400)
is it safe to run..?
CPU - i7 10750H Laptop Processor
Intel's site says it supports only
How does heat damage a CPU/GPU overtime? What changes in functionality occur when a CPU/GPU become "old" or "worn" out?
I'm not talking about thermal throttling, but if a CPU does age/has sustained high temperatures over the years, does that affect when the threshold for throttle in the future...
This question just popped out of my head, if PBO (the automatic overclocking feature of AMD) is enabled on Ryzen processors, does it mean that the overclock frequency that PBO can provide the CPU apply to all cores? For example, if the PBO feature enables the 5900x to reach 4.5ghz, is...
I was wondering if more cores will produce more heat.
Will frequency also be a factor in the production of heat?
A Ryzen 3 2200G and a Ryzen 5 3600 has the same TDP which is 65W, but does that mean that they'll produce the same amount of heat?
If this was already posted before and was already...
Recently i bought a pair of 2*8Gb RAMs ( 3600Mhz - CL18 ), i found a good deal on them.
Now i wanted to add more RAM to reach 32Gb, but i found that they are out of stock, i made some calls to the suppliers in my country and all of them say that they are out of stock and there's a...
Guys please help me out
I have a laptop HP 14-am519tu.. online websites shows that it supports DDR4 RAM upto 2333 mhz.
I have bought 2666 mhz ram online https://www.amazon.in/dp/B08C56KXQJ/ref=cm_sw_r_apan_glt_fabc_1TD433YK8STGF54HGMJP
As fas as I have searched online, it says 2666mhz will...
I own a vivobook 15 x510unr laptop. I replaced the 8gb ram module with a pair of 2400Mhz Samsung M471A1K43CB1-CRC 8GB for a total of 16GB 200MHz.
I noticed that in the monitoring software the frequency is 666 CAS 10 and for a second it changes to 1200 CAS 17 and it goes back again and...
Hello. Please help with overclocking the GPU for GPD MicroPC and Chuwi Hi10X (Intel Celeron N4100 and N4120), Intel made a limitation of 8.5 watts per GPU.
Google Translate is used.
8.5 watts = 700 Mhz.
GPD MicroPC vs GPD Win 2 performance comparsion
GPD MicroPC is 2 times weaker than GPD...
I just bought a new pc that has 2x8gb of ram in one of the module. Because I do some video editting I figured out that I needed more ram so I bought a couple of 16gb extra ram for the second module.
The already pre-installed ram works fine in a 3200Mhz (1600 each) frequency but the...
Suppose you have 2x 3200 & 2x 2400 Sticks.
This is running quadchannel and in general @ 2400mhz since the 2 Sticks are the lowest freq. correct?
If you want to run at 3200mhz you'd need to disable/remove the lower frequency sticks correct?
If that is the case, is it possible to utilize all...
Guys today, I found out on my nzxt cam app that my gpu clock speed just spikes from 210 MHz to 1777 MHz directly, anyone got a way to fix that??
BTW: I'm using an rtx 3060 XLR8 Dual Fan edition from PNY
Hey guys, I hope you all are doing well, I just wanted to ask you how I can change and lock my CPU frequency in the BIOS because my CPU frequency is nearly always at max (I have a ryzen 7 5800x and it goes quickly from 3,8 GHz ti 4,7 GHz) so it makes the cpu fans turn too much and make too much...
I have a GIGABYTE B450M S2H motherboard, Ryzen 5 3600 CPU and a couple GSKILL 8GB Ripjaws V 3000MHz RAMs. When I enable XMP profile the RAMs working with 3000MHz and 1.35V but the Windows showing BSODs constantly. I tried to set my RAM frequency to 3000MHz by manually and disabled XMP, in this...
I am going to be upgrading my system to a Ryzen 5000 series CPU, particularly the 5800x or the 5900x (Can't really decide yet because both CPU's are just too good, though I'm an editor so there's a strong chance I'll be getting the 5900x). I did my research and I know that Ryzen...
Hello guys, My question is about RAMs. I have i7-3770k, rx580 8GB and a <Mod Edit> motherboard. Currently i have DDR3 8gb 1833mhz ram but i can only use 1333 cuz of my stupid motherboard. In games like valorant i get 120fps. CPU usage is about 0-30% and GPU usage is also 0-30%.
So i think the...
Hello. I have an AOC 24G2W1G4 144hz monitor. It is the only monitor in use, and I am using a DisplayPort Cable. For some reason it is capped at 120hz and I am trying to figure out why. I have updated Windows and have gone into Nvidia Geforce experience and updated drivers there.
I wanted to...
As expected, on all 6 cores, the speed never goes above 3.89GHz, which is normal.
However, I expected it would reach the advertised 4.1GHz on a single core, but if I run a benchmark of some sort, it will only go to 4.08GHz max, never above that.
Is this expected behavior?
I went into the UEFI and changed the DRAM frequency from 2400MHz to 2666MHz.
This is the model/part number of my RAM sticks: CT8G4DFD824A.
The maximum officially rated speed for them is 2400MHz, however both the CPU and motherboard support 2666MHz max.
So I adjusted only the DRAM frequency...
So I am upgrading my cpu to the new ryzen 5600x. Would it be better for me to run 2x8gb at 3200mhz (16gb) or run 2x8 + 2x4 at 2133mhz (24gb). Is my slower ram going to bring down the performance of the pc? What is more important; higher freq or more mem?
Hyper evo 212 black...
Hi, I have a Ryzen 3 3100 and the frequency ocillates from 2196 (this is the lowest it can get, I think it's locked) and 3900Mhz on 0% usage CPU.
I'm using the stock cooler and in cinebench I get 78° on a single test, don't know if it's normal.
Does anybody know if this may be correct about the screenshot? It's taken from SiSoftware Sandra and, as far as I can tell, the lower the RAM frequency, the lower the latency? Meaning a RAM stick with CL16 can work at 1185MHz and CL11 at 815MHz?
Thank you for reading what I might...
My desktop is extremely noisy in a lot of games, most recently Dying Light which is from 2015, and it becomes unbearable within a couple of minutes.
I bought an RTX 2060 and upgraded my cooling fans not long ago, and this is actually where the noisy issues began (this is also when...
After updating my BIOS on Z390 Gaming Plus (to version 7B51v1A ) my memory cannot be set to 3000Mhz profile which is normaly supported. Interesting thing is that memory previously (on previous BIOS versions) was working on this frequency. I've set values manualy - frequency to 3000 and...