I cleaned my pc, and I admit this wasn't the brightest of ideas, with a leaf blower. I was pretty far away and made sure the pc was off and everything. I had done it before with no issue in the past. Anyway, i dusted my computer and i started it up. Everything was completely fine until i booted...
My PC runs normally when I don't plug in any Graphics Card in the PCIe slot but as soon as I insert the Graphics card it either doesn't boot/stuck in the boot screen/stuck on a black screen with some message (attached picture). I doesn't boot when I plug in the Galax 1050ti. But it is stuck in...
So this is my first post on here and I could really use some help! I recently built my first PC and I think I may be having a MOBO issue. First a few of the main specs: msi b450 tomahawk (not the max), Ryzen 5 2600, msi RTX 2060, trident g skill neo 16GB 3600, powered by a Corsair RM850x with an...
I unplugged my Asus NVIDIA GeForce GT 650 graphics card and plugged in my new Palit NVIDIA GeForce GTX 1050ti. Now my PC won't boot.
The CPU, PSU and GPU fans all starts, the power light comes on with the HDD light which flashes a little, green DVD light comes on and off then after 1-5 seconds...
Hello. I just recently built a PC. I can turn on the PC, but a few things are off. The motherboard shows a white light, and I can see all the fans are on. However, there is no power switch LED, there is no signal to the monitor, the keyboard and mouse aren't lighting up, and you are unable to...
b450 bazooka v2
building
corsair
EVGA 1060 6gb
ez debug
graphicscardproblem
motherboard
Motherboard Problem
msi
power
power led
Power Switch
troubleshoot
Greetings,
Recently I have assembled my new PC, but I have faced one problem.
The problem appeared just after assembly, as I have turned on the pc - I would get "no signal - going to the sleep mode" on the screen. At first I thought it was a HDMI cable or monitor issue, which it was not. At...
Basically a week ago my msi gaming 5 z97 shorted out after little over a year of use.
Im having trouble locating a replacemen board.
Can anyone recommend websites , I've tried Ebay and amazon , it can also be an alternative 1150 board
I recently purchased a used terrans force x711 with gen3 I7 processor, 16gb Ram, and dual HDDs. One is 320gb 5400rpm and the other is a 500gb 7200rpm. I plan to format and reinstall windows 7 ultimate. My question is which hard-drive should I install the OS and programs on?
How would you...
hello all,my 6 years old pc is very outdated so thinking of upgrading it but im confused what to do bmy options are and btw i already have a asus strix gtx 960 2gb ddr5 and also i have 6 gb ddr3 ram,corsair cx600 psu and wd blue 1th 7200rpm hdd
1.intel core i5 6600k+asus pro gaming z170 mobo+8...
I have the gigabyte f2a88xm-d3h. Are there any drivers i need if not raiding that should be put on before windows? Also are there any special utilities that the board needs to function properly?