heatsink cooler

Hi guys 1 and a half month ago I bought my new gaming pc and I have AMD Radeon Sapphire RX 7900XT 1 week ago I started having problem with high temperatures while gaming and even without it My temperatures were between 70/75 celzius while gaming, games such as Days Gone, Spiderman, Dead...

I bought a used motherboard which included a big cpu heatsink(without a fan). I am wondering if it would be best to just attach and try to tie a fan to it or get a new coolermaster 212. It's for a 4470k on an Asrock z97 board. I won't OC yet but I definitely plan on overclocking at least to 4.2...

Hello all, I never follow any update about pc anymore, so i really need suggestion I have pc (build from 2011): i7 3770 3,4ghz (lga 1155) with stock cooler 1050ti (upgraded from 750ti) corsair 12gb ram (ddr 3 1600mhz) Motherboard: Gigabyte B75M-HD3 room ambience (idk) casing: 455x180x420mm...

Hi I recently installed a Cooler Master Hyper 212 EVO Black RGB edition. First I cleaned off the previous old thermal paste with 99% IPA. I applied the thermal paste properly, and then reseated the heatsink a few times (3 or 4). once during installation and a fe times 2-3 hours later (this was...

My cpu fan cable is snug between the screws and the heatsink, literally hugging the heatsink for cable management. Is this dangerous to the cable or the heatsink?

Here's my build: https://ca.pcpartpicker.com/list/Js6mV6 RAM: https://ca.pcpartpicker.com/product/kXbkcf/gskill-memory-f43200c16d32gvk Cooler: https://ca.pcpartpicker.com/product/4vzv6h/noctua-cpu-cooler-nhd15 Case...

I have a KingPin card at the moment and it's overall a good card, but the copper plated heatsink looks extremely ugly in my black and white build. Does anyone have any recommendations on how to change the colour of the heatsink without increasing temperatures by too much, whether it is through...

I needed to reapply thermal paste as when I did it a couple of months ago I was a bit overzealous. Turned machine on after and everything was fine, however, I noticed my CPU fans weren't able to be controlled by CUE software, realised I'd forgot to plug back in the micro-usb to the heat sink...

On the Gigabyte Z390 AORUS Ultra in particular. I'm looking to buy the Fractal Design Meshify C and for a top radiator mount the supported maximum height for top mo/bo components is 4 cm. It says so on their page for that case. I couldn't find any sheet with the mo/bo overall dimensions so I...