hyperx

Hi, my os -WINDOWS 10. I recently bought Hyperx Pulsefire Core gaming mouse. Before that I was using a Logitech g302 wired mouse. With logitech G hub software , whenever i used to minimize games and do any general windows stuff like browsing, using other apps etc my mouse button preset would...

[Moderator Note: OP orginally flagged as "Solved". No indication that the problem was solved so changed to "Question".] I literally just bought these headphones, installed the NGENUITY software, and when I try to activate DTS or the Equalizer, there's simply no change. It shows as active...

Hi, I have a HyperX mouse that is 7 months old and recently the wheel click stopped working. I decided to repair it, open it and change the faulty switch but it doesn't have any identification (I haven't removed it yet) Do you know where I can find the name of the switch on a page or someone...

Hello everyone, I wanted to ask for your opinion on my next upgrade. I currently have the Creative SXFI Gamer Over Ear Gaming Headset as my headset and the Logitech G502 Hero RGB as my mouse. I have them for at least 3 years now, and I'm looking to upgrade them, although they still work fine...

Hello. I bought brand new Intel NUC 11 Extreme KIT with i7 11700B. I added RTX 3080 XC3 ultra, 32gb ram and 3tb ssds. Im running Windows 11 and i have a issue that cause my microphone. When microphone is pluged in, i shut Down PC and after about 5s my PC starts again. If i unplug the microphone...

Hello there, I'm using HyperX Pulsfire Dart Wireless Mouse for some time now and all worked properly until today. NGENUITY won't recognize HyperX Pulsfire Dart Wireless Mouse no more. I hope you can help me about this problem. Thank you in advance. Kind regards.

can anyone really explain how the XMP option in the BIOS is related to memory overclocking? my motherboard (https://www.msi.com/Motherboard/B550-GAMING-GEN3 ) is said to support until 4400 mhz ocs but my sticks are 3200mhz will i be able to reach at least 4000mhz? they are hyperx fury standard...

I have a situation with my current RAM slots on my MSI Aorus B450M VDH-MAX AMD. It happened last week where my PC suddenly froze and powered off. I figured it wasn't too drastic and tried powering on the PC again. But once I pressed on the Power, the PC doesn't boot up at all. Checking the...

I've tried every single solution regarding updating bios and drivers and even windows, it doesn't work unless i unplugged and re plugged the usb cable... anyone can help?

I recently got a pair of these and noticed that the power button wiggles a bit or maybe mine is loose? Have heard it make a noise while moving around when I am actually wearing the headphones. The noise goes away as soon as soon I put a finger over the power button. Was just curious if anyone...

I have the Hyperx Cloud Flight wireless headset, which uses a USB dongle to connect to my computer. I've used them on my desktop for over a year now with no issues and recently started using them on my laptop. At first, everything was normal, but after a week or so of using them, they became...

Before getting into it, my parts are: Ryzen 5 3400G 2x16GB 3200Mhz HyperX Fury Gigabyte B450-M Gigabyte P550 80+ Bronze My PC has been up and running for the past 9 days, up until now. I have come accross three different issues so far. First, the system would restart by itself after a few...

Planning to buy another 4GB HyperX Ram, then I noticed, they're selling the new model (HyperX Fury Beast) and mine is the old HyperX Fury (HX426C15FB/4), I currently have 12gb Ram and making it to 16gb. Any thoughts or is it compatible?

Hello, recently I bought Ryzen 9 5950x for my workstation that has 4 sticks of ram - 48gb (2x8+2x16) HyperX 3200mhz with xmp1 enabled, on MSI Tomahawk Max B450. Sometimes under load I had sudden black screen and CPU debug led. I knew that 5950x is too much for b450 and I thought that was the...

Hi, I already have Ryzen 5700G and HyperX 32GB Predator DDR4 3000MHz CL15 KIT HX430C15PB3K2/32. So I am looking to buy Motherboard to work with this CPU&RAM. I am using PC for graphics, I am not into overclocking or gaming. I need ATX form and as many USB, M.2 and SATA slots as possible. First...

I've been using a single RAM Kingston Hyperx DD4 8Gb 2133MHz and decided to add a new one, exact same one but diferent model number, same speed and size. Old model number: HX421C14FB2/8 New one: HX421C14FB/8 I searched for a while and apparently the model ended 2/8 supports dual channel and the...

Hello guys, I would to ask if this ram would work on my motherboard Gigabyte B360M DS3H. I've checked the memory support list but I've found only the old model of the RAM (Kingston HyperX)...

I currently have 2x4GB DDR3 1600MHz CL11 HyperX Fury sticks on a Gigabyte GA-H77-DS3H motherboard, the motherboard only supports RAM speeds up to 1600MHz. I found a good second hand deal on two more 4GB HyperX Fury sticks that are rated at 1866MHz, I just wanted to know if installing these...

Processor Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz 3.70 GHz Installed RAM 32.0 GB | 4x HX440C19PB3A/8 System type 64-bit operating system, x64-based processor GPU 2080ti Hybrid Mobo ROG MAXIMUS XI HERO So I recently changed my RAM freq. to 4000Mhz as its supported by my RAM and was...

Hello every one i have been trying for quite sometime to enable XMP profile on my memory but every time i do that using Gigabyte Easy tune software or directly from the BIOS , it require a restart then it says boot fail and i have to to revert the setting, Note that: my memory is :Kingstone...

My friend has a HyperX Cloud 2 headset, and a Corsair M55 RGB PRO mouse. When he does certain tasks, the mic cuts out. It ranges from different things to streaming on discord causes it to cut out entirely. He can play Phasmophobia and it will cut out after a few minutes of playing. The mic stays...

HI! I was looking for an upgrade but ram I've right now is not available anymore here, and the highest frequency that my pc supports is 2666mhz So I've HyperX Fury 8GB (2*4) 2666mhz DDR4 CL15 DIMM HX426C15FBK2/8 can it work with HyperX Fury 8GB 3200MHz DDR4 CL16 DIMM HX432C16FB3/8? both are...

So in my pc i already had 16gb of hyperx fury ram (2400mhz) i then bought another pair of 16gb but this time 3200mhz i installed them correctly but it shows that i have 2400mhz. file:///C:/Users/liamc/Downloads/STUFF/Capture.GIF

I need a new ram asap. my mobo b360m pro vd: https://www.msi.com/Motherboard/B360M-PRO-VD.html my old ram CORSAIR 8GB Vengeance LPX 2400mhz: https://www.amazon.in/Corsair-DDR4-2400MHz-Memory-Black/dp/B01ARHBBPS/ref=sr_1_3?dchild=1&keywords=8GB+2400MHZ&qid=1626399723&s=computers&sr=1-3 the ram...

Hello! For the past 2-3 years now, I keep my volume set to 20ish on my PC, maxing out at 100. I'll turn it up to around 30 for quieter stuff but past that and it get too loud. To prevent any misunderstanding, I have no hearing problems. I tried fixing it in the past but just couldn't figure it...

I am looking for a pair of headphones for gaming and music around 100 dollars. I just got the HyperX cloud flight S but I don't like the sound quality. I currently have the Corsair HS60 Pro and I like the sound on that. The sound quality is good for music and gaming on the hyperx headphones but...

I just got the Hyperx cloud flight s headphones and I don't like how voices sound. At first I didn't like how anything sounded but I was able to change is in the speakers properties, but I can't find out how to make voices sound better. I used to have the Corsair HS60 pros and it was on the bass...

Every time I try to stream on discord, my HyperX Quadcast S goes berserk and just keeps disconnecting and reconnecting. I have tried to change all of the discord settings to off and whatnot and nothing has helped. I have also tried changing the usb and nothing. Has anyone else had this problem...

I've got a motherboard with 2x1.2V RAM slots and a i5-7500 CPU that supports up to 2400MHz at 1.35V (DDR4-2133/2400, DDR3L-1333/1600 @ 1.35V ). I recently bought a dual-kit 1.35V 3200MHz RAM. Does anyone know whether raising the voltage on the RAM slots from 1.2V to 1.35V could have an...

Hi, I have a Pulsfire Surge and sometimes my scroll button won't wotk until I press it very hard. This button is important for me, as you know you can open link in another file. Also, sometimes if I hold any click, left or right, it just disable for a second and the enable again. Ex: I f I aim...

Hi, I've got a G. Skill Aegis 1x8GB 3200Mhz CL16, and i want to buy a new stick of RAM. The Aegis costs a lot more now so I've been thinking of buying HyperX 1x8 GB 3200Mhz CL16 FURY. Both of these got XMP 2.0. Will it work, or is there any problem? Even with the identical specs?

It happened that I am overclocking my RAM through XMP profile by auto with the exception of selecting 3200mhz (2666mhz hyperx kingston). It usually set itself around 1.36v based on CPUz and HWMonitor but i accidentally left it by 1.2v manual since I was playing around it the other day. I find...

Hey, I have the following kit from HyperX https://www.kingston.com/dataSheets/HX432C18FWK2_32.pdf, thing is this kit is no longer in production, when I got this kit 3 years ago I thought I'll add a second kit later on but because it's no longer in production I either have to get an entire 4x16GB...

VENGEANCE® LPX 16GB (2 x 8GB) DDR4 DRAM 3600MHz C18 (CMK16GX4M2D3600C18 ) VENGEANCE® LPX 16GB (2 x 8GB) DDR4 DRAM 3200MHz C16 (CMK16GX4M2B3200C16) HyperX Fury 16GB (2 x 8GB) 2666MHz DDR4 CL16 (HX426C16FB3K2/16) XPG Z1 (2 x 8GB) 16GB DDR4 3200MHz (AX4U320038G16A-DBZ ) Pny XLR8 (2 x 8GB) 16GB DDR4...

Hello, I have 2x8gb 3200mhz hyperx fury of ram, I want to increase it to 32gb at least but I have problem with air cooling that blocks the 4th ram slot. I have two questions I wish if somebody can answer. The first one can I buy 2 sticks of ram from different brand with same speed and voltage...

So I'm thinking of upgrading my 3770 (non k) to an i5-10400F. However I need some help with which type of RAM to pair it with since I'm on a budget. I'm in between getting either the Gigabyte H410M motherboard or the MSI H410M-A PRO. thinking of pairing it with either 2x G.Skill Aegis 8GB (16...

Hello, I have a question. Which of the three headsets would you recommend: The Razer Blackshark V2X or the HyperX Cloud Alpha or the SteelSeries Arctis 3? Would really appreciate your advice.

Hello everyone, So i had a hyper x cloud core and i was happy with it almost 5 years with it but the protection of the ears is getting doned so i decided to buy a new headset! The headset that i buy was blackshark v2 x i liked the reviews and it feeled like a better cost-benefit against cloud...

I have had my HyperX cloud 2(wired) for almost 5 years now and its getting pretty old. With this, I was chatting with some friends and they said my microphone was popping. Over a day and a half this popping has escalated to my microphone not working. I was able to test it enough to figure out...

As the title says, I want to know which of these two headsets have the best sound quality while gaming. (I play a lot of COD Warzone and I am playing on a PC). So should I get the Cloud Alpha OR the GSP 350?