Intake & Outtake

I've been researching on cooling and proper case airflow recently to get the most bang out of my buck for cooling. My current setup consists of i5-13600 KF, Zotac RTX 3080 Ti AMP Extreme Holo and a Z690 UD DDR4 Motherboard. I'm currently using a Deepcool AG620 air cooler and the stock fans from...

Hi guys! So I just bought my RTX 2060 gigabyte yesterday and my H100 Corsair CPU cooler. When I'm playing Apex Legends my temp used to be 80-85c sometimes it went to 87c. I've done my research that RTX 2060's were pre-made to reach that temp. But I'm afraid of the lifespan that it would get...

View: https://imgur.com/a/7HrrQQh Hi all, this is my cooling setup. 2x intake at the front 1x intake facing the gpu 1x exhaust out the backside (top back) my psu is mounted facing downwards, so it’s an intake fan. are my arrows somewhat accurate as to how the air is flowing in my case? Would...

Hi, I was thinking of getting an AIO (any 240mm), & I was just wondering if it is mounted on the top as intake and I have 2 fans in the front and 1 front in the back. What would be the ideal fan configuration? Its just because I'm not really sure about intake or exhaust so for example should all...

Due to my case having a few spots where air can go in the front I decided to do 3 intake fans on the front, 1 intake fan on the top, and 1 exhaust fan on the back, will it greatly affect my temps negatively or positively if I turn the top fan into an exhaust?

In these cases: https://fantech.ph/product/fantech-pulse-cg71-rgb-middle-tower-case/ https://www.amazon.com/-/es/Azza-Titan-240-Mid-Tower-CSAZ-240/dp/B01267NXRG in both of them can be placed 2x 120mm fans in the bottom, they should be as intake or exhaust? also if i place them as intake will...

Hello everyone, Was looking into getting a case that provides great airflow through the front, and top for a top mount AIO. Cooler Master H500 is one of the first choices, but unsure if 3 intake fans, with one exhaust fan in the back with the radiator on top would be sufficient enough. Have a...

So I am looking at the Lian Li PCO11 Dynamic Case with the Corsair 150i Pro CPU Cooler (switching the ML fans for LL). However with this case & using LL fans it seems the only option is for the CPU Radiator to be used as outtake at the side or top. So wondering how the CPU cooling would be if it...

I have an asrock 2320m pro4 motherboard. I recently got a new case (nzxt h500). This comes with 2 exhaust fans which I have plugged into the 2 case fan slots of my mobo (a 3 pin and 4pin). But now I want to add an intake fan. I only have two slots on my motherboard left, one called amd header...

This is Corsair SPEC-05, comes with a fan pre-installed at the front and an extra 4 fans mounts (with the cage installed) for user installation. There are 5 fan mounts in aggregate. As I already had three 120mm fans lying around, I was suggested this config: 2x 120mm fans in front (intake), 1x...

I have a cabinet (Corsair SPEC-5) that comes with 2 fan mounts at the front, 2 fan mounts at the top and another mount at the rear. In aggregate, it has five 120mm fan mounts. The cabinet itself comes with a fan pre-installed at the front. One fan would never be enough, so I bought another...

Hello. 1. I got a question about my PSU and it is whether it can be used as an exhaust fan in my case. You see i have the Sharkoon Nightshark RGB and my PSU is top mounted and since the top space of the case is reserved for the PSU i cannot place any other exhaust fan but just one on the rear...

I'm looking to get any suggestions for fan curves on my setup. I've never done a push pull setup before and I'm looking to learn a bit with some suggestions. Setup: Case : Lian Li pc-011 GPU : Asus gtx 2080 ti CPU : i-9900k RAM : G.skill Trident Z rgb 32gb 3600 (2x16gb) CPU cooler : Corsair...

I have an Asus K555L laptop and I want to clean the fan as I've been having heat issues lately but I can't find the intake this is how it looks like; 3 is listed in the manual as "the air vent" Which makes me unsure of what it is. Also, I would love it if you would walk me through the process...