memory 16g

Forum discussion tagged with memory 16g.
  1. agphotoworld

    Question HP Z620 Workstation - one memory slot problematic

    Product: HP Z620 Workstation I had 16 = 4 x 4 GB RAM shown as 12GB rather than 16GB HP Z620 Workstation - 8 slots DDR3 RAM = BLACK X 4 + WHITE X 4 After replaced with 16 GB x 4 = 64GB now shows 48GB Found the problematic slot - by trial and error, is the second black slot from the rear -...
  2. Jarominex

    Question My Ram Upgrade Is Having Issues

    Hi! I just bought some new RAM, Corsair Vengeance LPX DDR4 2666MHz 16gb (2x8gb). I originally had 8gbs, so it was time for an upgrade. When they arrived, I took out the old RAM and set in the new ones with no issue. However, when I booted up the system, it crashed shortly after with a...
  3. pigzit

    Question Task Manager & Resource Monitor display having both 32 and 16GB of ram at the same time?

    I recently upgraded from 2x8GB 3000mhz DDR4 to 2x16GB 3200mhz DDR4 on a system with a Ryzen 5 1600, RX570, and B350F. In task manager my total memory is displayed as 32gb, but the graph and all other data reads as if I have only 16gb. Also listed in task manager is "Hardware Reserved: 16gb"...
  4. V

    Question Best DDR4 ram memory update for 5800x3d?

    Hi first of all I need to mentioned that now I have 2 sticks of DDR4 on 3600mhz cl16 (16-19-19-19-39) single ranked Hynix Ok what is the best DDR4 ram kit to get for update for my 5800x3d? :] - 4 sticks from 8gb = 32gb 4000mhz cl16 (16-16-16-32) dual ranked (cost 200$) - or it will be...
  5. M

    Question Corsair Vengeance PRO RGB Not Running at 3200

    Hello, I having an issue with my new set of RAM that my gf bought for me on Christmas. Its not running at it's 3200mhz, I turned on XMP and when I save and restart I get the memory beep code then it sets back to 2133mhz. My pervious set, Hyper X Fury, worked just fine even overclocked to 3200...
  6. E

    Question 16gb or ram running at 8gb

    Hello, I've got a problem with my RAM, if you know what the problem is I'd greatly appreciate it if you could inform me! The problem I can list is that my system information shows that I have 16gb of physical memory installed, 7.93gb of total physical memory , 4.13gb of available physical memory...
  7. michaelroland98

    Question Installed 8gb more Ram and failed to boot

    edit: If its not clear I am trying to get my machine to 32GBs of Ram I have two new sticks I bought a prebuilt machine that contained OLOY 8gb ram sticks x 2 giving me 16gb. The other day I found the exact same model on AMAZON and bought them, but when I went to install them and turn my pc on...
  8. jinqty

    Question change 16GB 3000mhz to 3600mhz or add them together?

    Hello, It's been years since I made a post. I hope you guys are doing well. I have a situation that I've never had before. I usually buy and replace my memory but in this case, I currently have 16GB 3000mhz cl15, and I just bought an additional 16GB but this time it's 3600mhz cl18. Should I use...
  9. S

    Question 3200mhz ram works only 3000mhz

    Build new pc spec are 12400f Asus b660m plus d4 Tridentz F4-3200C16D-16GTZR nzxt h510 flow Pc runs perfectly fine while using everything auto in bios dram configuration but as soon as I set xmp 1/2 system doesn't start and bios gets reset tried 3600mhz tried 3200mhz with 1.4v same problem but...
  10. T

    [SOLVED] New ram problems

    I've been using a single RAM Kingston Hyperx DD4 8Gb 2133MHz and decided to add a new one, exact same model, speed and size. The motherboard detects that there has been a change to the memories and asks me to set up or boot normally, either option works fine and the pc turns on perfectly fine...
  11. adham alghreeb

    [SOLVED] dual memory or single memory

    i have a 16gb (one piece) 3000mhz memory and 8gb (one piece) 3200mhz memory , i install them as a dual but i can't run them on 3000mhz ( auto is 2400 ) and every time set them to the lowest mhz the pc crash so what's the better 24gb with 2400 and dual or 16gb with 3000 no dual
  12. askiyyyy

    [SOLVED] I have a i5 7400 H110M PRO-VH PLUS mobo with xmp said with can i run 3200mhz ram?

    My computer spec is I5 7400 H110M PRO-VH PLUS mobo GTX 1050 TI Also the H110M PRO-VH PLUS mobo said that it can only support 2133mhz ram speed, but right now im using 8gb 2400mhz and also currently running at 2400mhz newbie question here Task Manager
  13. GRoz9

    [SOLVED] My RAM has been used up by 50%+ on idle

    i have no clue how to fix it and I don't want to reset my whole PC as I have many application. Specs: Cpu-Ryzen 5 2600 6core Gpu-GTX 1060 gb Memory- 16Gb corsair Storage-Seagate Barracuda Compute 2 TB MotherBoard-MSI B450 GAMING PRO CARBON AC ATX AM4 Motherboard psu-Corsair CXM (2015) 450 W Any...
  14. B

    [SOLVED] Memory issues that weren't occurring before

    I have 16 gb of physically installed memory, but recently when I try to run multiple games or apps at the same time I seem to run out of memory and they crash. My pc has been perfectly capable of running it before, so I'm confused what changed. View: https://imgur.com/a/cLZDqC5 (my task...
  15. R

    [SOLVED] How to find if my computer supports additional 8GB ram?

    I have a Lenovo Product ID 00325-81774-31939-AAQEM running Win10 (Home :( ) with 8GB. I would like to install an additional 8GB. I haven't done that in a long time. Would any 8GB ram set be OK? When I install it, I think I have to unplug the computer and let it it for a while. And of course go...
  16. T

    Question Memory probs for noob

    So I am new to building PC and trying to figure out why neither of my pairs of ram sticks will run in dual channel but will run just fine in single channel. Ryzen 5 3600XT MSI B450 Tomahawk Max Corsair vengeance lpx CMK16GX4M2B3200C16 Ver4.32 Corsair vengeance lpx CMK16GX4M2Z3600C18 Ver 3.32...
  17. sprakatingg

    Question Not utilizing all RAM

    Hello, I am running at Windows 10 pro, I recently reformatted my PC because I am getting 8GB out of 16GB. This happened few months ago, I didnt know what happened. Windows Pro Ultimate 64bit X470 AORUS Ultra Gaming AMD Ryzen 5 2600x 8x2 t-force nighthawk ddr4 3200mhz Tried changing the...
  18. Pc BUilderr

    [SOLVED] Memory help

    I have 4 dim slots on my motherboard and I’m using only 2 for 16gb each of them are 8gigs. But what can I do for the other two slots I’m not using. Can I put more ram? Or does it have to be a specific thing I put in the two slots im
  19. Baelzar

    [WTS:USA] $170 NEW IN BOX HyperX Fury 64GB (4 x 16GB) DDR4 2133MHz DRAM Desktop Memory

    USA Southwest Region. My ASRock B450m Steel Legend / Ryzen 5 3600 apparently doesn't support 2166Mhz memory. This is what I have: https://www.newegg.com/hyperx-64gb-288-pin-ddr4-sdram/p/N82E16820104678 It is brand new, in the unbroken wrappers. I'd like to sell it outright for $170.00 shipped...
  20. S

    [SOLVED] Only 1/4 of each stick of RAM being utilized?

    I recently acquired a workstation PC from a friend for use with my home virtualization server, the machine has 4 Corsair 16gb RAM sticks filling all slots although in Linux screenfetch, and lshw its only listing as each stick having 4gb of memory. I tested a couple one-by-one (single stick solo...
  21. Dozel

    [SOLVED] Dual memory problem

    Yesterday my pc got into the reboot loop problem. In the end, my pc just shut down itself instead of a reboot. This morning when I turned on the computer, the monitor, keyboard and mouse are off while the pc is running. So somewhere in this forum suggested that removing one of the memory stick...
  22. A

    [SOLVED] What ram: Ryzen 3600 & X570 I Aorus Pro Wifi (in an NZXT H1 case)

    What do you guys recommend I get? In terms of future upgradability will the 1.35v kits be better? is 32gb or 16gb better? Can I still run at 3200/3600 with the 3733 or 4000 kits @ 14CL? 16gb, 3200 MHz, 14-14-14-34 @ 1.35v; 16gb, 3600 MHz, 14-15-15-35 @ 1.45v; 32gb, 3733 MHz, 17-19-19-39 @...
  23. Righto123

    [SOLVED] Memory adjustments new build

    Hi, I have a new PC build, 1st build Msi b450 gaming plus max Rx580 16gb 2666 ram 16-18-18-35 1.2v 1tb ssd Ryzen 3200g I have tried A-XMP and manually adjusting ram settings to mimic timings voltage and frequency on ram sticker. However each time this is done fortnite stutters around 60fps...
  24. J

    [SOLVED] Userbenchmark Results - Memory Kit 31st Percentile - Adata DDR4 3000 2x8GB

    I'm hoping to get an explanation for the low percentile results of my memory kit Summary: UserBenchmarks: Game 88%, Desk 95%, Work 96% CPU: AMD Ryzen 7 3700X - 95.2% GPU: AMD RX 5700 - 88.2% SSD: Adata SU630 240GB - 100.5% HDD: Seagate Barracuda 2TB (2018) - 103.3% RAM: Adata DDR4 3000 2x8GB -...
  25. N

    Question so this weird thing happened on my screen

    /2b39537b9421d38815e1592856f193bd (gyazo link) first time happened but what i did was adjust the core clock on my graphics card a bit more (in amd radeon settings). I only did it for one specific game and a few minutes later im met with this gray/white vertical line screen error. any idea what...
  26. C

    Question Cant overclock ram with xmp button (bios CPU-Z says that i have 1332mhz and but in advanced i have 2133mhz)

    I have a MSI Z370A-PRO motherboard Patriot Viper 2x8GB DDR4 PV416G320C6K RAM I am using dual channel. For some reason my base frequency and timing is set to 666mhz (15-15-15-36). and im trying to overclock it. In the BIOS there is a button that says XMP which is the premade profile for...
  27. iShoTz

    [SOLVED] Mix 16gb with 4gb

    I currently have 2x4 GB ram, which is 8GB together. Kingston ,2400 MHz ,ddr4 And my motherboard have only 2 slots for Ram, Motherboard: H110M which supports 32gb And I’m willing to buy a Corsair 16GB DDR4 2400MHz (1 stick) , So will it work together, A 4GB stick and 16GB stick together?
  28. E

    Question Black screen after enabling XMP

    When i enter the bios i go to turn on xmp so my memory can run at its rated speed. After saving changes and clicking save and reboot the screen goes black and i need to reset the bios for it to boot. Any help is appreciated PC Specs: Ryzen 5 3600 stock Msi b350m gaming pro Corsair vengeance rgb...
  29. R

    [SOLVED] Want to know what Ram to buy

    So I currently have a single 8gb stick of ram in my pc and would like to upgrade to 16gb of ram. This is my current PC specs Processor Intel® Core™ i5-9400F Processor (6x 2.90GHz/9MB L3 Cache) Processor Cooling Asetek 550LC 120mm Liquid Cooling System - Standard 120mm Fan Memory 8 GB...
  30. R

    Question Computer just freezes after installing new ram

    So I recently bought 2 new ram sticks for my pc. I originally only had a single 8gb stick in my pc and I wanted to upgrade to 16gb. I went online and bought a set of 2x8gb ram sticks that were compatible with my motherboard and after installing the new ram my pc would boot up perfectly fine and...
  31. T

    Question I need help buying new memory...

    I currently have a 1x8G DDR4 UDIMM 2133 MHz stick and I want to buy another 8GB DDR4 stick. I have 3 options (unless you can suggest something better) and want to know which is best: Get an identical (according to the part number for my RAM stick on the pcsupport.lenovo.com website) stick for...
  32. D

    [SOLVED] Why is my memory only running at 2133mhz even though they are 3200mhz

    So I just built my first gaming pc and i've noticed that the memory was only at 2133mhz. I went and turned on the xmp profile for 3200mhz but the pc restarts 2 times and won't allow it to work. My cpu is the ryzen 5 1600. I know that my ram nor the cpu nor the mb is at fault because I built the...
  33. L

    Question Single 8gb or dual 4gb sticks?

    Hi guys, I just bought an HP Elite Convertible Mini Tower from Craigslist to play around with. It didn't come with any ram, and upon doing research, it seems that this system can go up to 32gb (PC3-12800 1600MHz). I could get a used single 8gb stick for cheap on E-bay, but was wondering if it...
  34. B

    Question Installed new ram and now USB ports disconnect.

    I recently installed a set of Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3200MHz C16 (CMK16GX4M2B3200C16) into my MSI b150 gaming M3 motherboard. I checked for compatibility on MSI's website and everything checks out. Everything seems to be working fine except a couple times after start up my...
  35. Vishal_7

    [SOLVED] Why can't windows 10 work properly ?

    Question says it all. Every time I try to use the BIOS feature 'Memory try it' and whenever some predefined data set fails then the CMOS clear just leads to windows repair and then restore. i'm really fed up of this . i have : ryzen 5 3600 , deepcool gammaxx s40 cpu cooler msi b450m pro...
  36. S

    Question Is this RAM compatible with my Motherboard?

    So i'm upgrading my system and i'm looking at getting some ram. Is this ram compatible with my motherboard and if not, can anyone suggest me 16GB DDR4 ram for it :) Thank you...
  37. HardAsARockie

    Question Installed 16GB (2 x 8GB) Only shows 8GB of RAM.

    Hello. I recently just upgraded my PC. Here are my specs: CPU: AMD Ryzen 5 2600 GPU: EVGA 1060 Superclocked 6GB PSU: Corsair CX430 RAM: Corsair LPX 3000Mhz 16GB I'm thinking this is a driver problem, but I'm worried this is a hardware problem. Thanks to anyone that responds
  38. Wyrmnax

    Question Memory troubles on B450M Steel Legend

    So... Having trouble getting my memory OCed on my Steel Legend. I got a G.Skill Trident kit of 16gb - 3600 MHz. Board auto detects it as 2133MHz - thats fair, that is base. It has a XMP profile for gskill at 3600 MHz. If I change the board to that and the save and reset, PC doesnt move from...
  39. F

    [SOLVED] Which Ram should I go with

    G.SKILL Ares Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model F3-1866C10D-16GAB : $127 CAD Newegg.ca tax/shipping included or G.SKILL Ares Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 2400 (PC3 19200) Desktop Memory Model F3-2400C11D-16GAB $131 CAD Newegg.ca...
  40. Martyuk

    Question DDR 4 Corsair Vengeance GX4M2B3000C15

    Unsure if my memory is working correctly I have 2 x 8gb Corsair DDR4 CMK16GX4M2B3000C15 sticks and according the CPU-Z and Corsair link they are showing max bandwidth of (1066Mhz) Yet this is supposed to be 3000Mhz? I have had several issues with this bnoard and have had to flatten the bios a...