mixing ram

Money constraints. That is why i just opted for a 32gb in the meantime so i can start on working. I do After Effects (video renders & editing, motion graphics, animation), Photoshop, graphic designs, some 3d modeling & sculpting. Recommended to me was to get a 64gb RAM for the creative work...

I have installed in my system 2 16gb 3200Mhz Corsair Vengeance Pro sticks with timing 16-18-18-36. It says Version 4.32. I recently bought some newer Corsair Vengeance Pro sticks that say version 3.32, and the timing is different, says it is 16-20-20-38. Would these two sticks all be compatible...

HI! I was looking for an upgrade but ram I've right now is not available anymore here, and the highest frequency that my pc supports is 2666mhz So I've HyperX Fury 8GB (2*4) 2666mhz DDR4 CL15 DIMM HX426C15FBK2/8 can it work with HyperX Fury 8GB 3200MHz DDR4 CL16 DIMM HX432C16FB3/8? both are...

Intel DB75EN motherboard (circa 2012) 4 sockets. Existing 2x2GB (DDR3 PC3-10600 • CL=9 • Unbuffered • DDR3-1333 • 1.5V • 256Meg x 64) from Crucial. Can modules for this board currently-selling also from Crucial (DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V • 256Meg x 64 )...

Hello, Old RAM (Corsair Vengeance): 16GB 3000MHZ New RAM (Corsair Vengeance): 32GB 3600MHZ I have plugged all of them into the correct slots, however, when I ever want to load my pc I would get a black screen for so long or the computer will infinitely restart on the boot and if I am lucky it...

Not sure if this is the proper place to ask but any thoughts would be great. So I recently purchased a pack of 2x8gb 3600mhz ram (CMW16GX4M2Z3600C18) and due to a mix-up I recevied 2 packs at the end instead of just one, so now I have 2 packs of 2x8gb RAM. They're both the exact same model, but...

i purchases 8gb corsair vengence 2400mhz lpx ram. now only the 3000mhz version of the same ram (corsair vengence lpx) is avaliable on amazon. does anyone know for sure that pairing the two would cause any issues or not? i have ryzen 5 1400 with b350 mobo.

Back in end 2019 I bought my second set of Trident Z RGB 16 GB 3000 CL16 Ram to upgrade to 32 gigs. So at first I saw that my old modules were hynix a dies and the new ones are Samsung b dies but with exactly the same specs. Thought it was fine and kept them but they really don't mix that well...

Hello! I have a somewhat older rig but it's still pretty solid. I have been upgrading piece by piece but it's getting harder and harder since things are becoming more and more legacy by the day. I currently have 1 X 16 GB G.Skill DDR3 PC3-17000 RipjawsZ Series for Intel X79 (9-11-10-28) Quad...

Hello, I am currently thinking about buying more RAM. I currently own 2x8GB 3000MHz Corsair sticks. The reason I would want to buy other RAM is because of the RGB (I know, I know..). I also know that there are certain RAM Coolers that I can montage on my RAM sticks that would take care of the...

Nowadays I have 2x4GB 2666mhz from Corsair and I would like to add more 1x8GB 2666mhz from Corsair too (getting 16 GB's), same voltage, speed, frequency, CL... Mobo: Aorus z370 gaming 5 (4 ram slots) CPU: i7 8700 Is there a problem if I make this "mixing", like would I have some problem in the...

Hi guys, i have just upgraded my ram to 16gb, i now have 2 spare 4gb sticks, i am just wondering if i put that into another pc with 2 4gb already in there (both ddr3 and 1600MHz) but different brands, there are 2 more empty slots on the other pc so then it can be 16gb also, could this...

Hello first of all i have to say my english is tribe so ... right to the point : i want to build pc and i choosed the pieces already but im not sure if its run greatly because my VGA is 2016 but motherboard and cpu is not , my plan> GTX 1060 motherboard : asus b150 pro gaming cpu ...

i recently bought a GTX 960 ssc and a logisys 480W PSU, but i did not realize the card required a 8 pin plug in from the PSU. i know there are 4 to 8 pin adapters but im not sure which one would be compatible or not, any help would be appreciated.

I have palit gtx 650 ti 1gb oc edition graphics card and I want to edit clock states via gpu bios. Can someone explain what GPC, XBAR, L2C, DDR(I guess it's gddr clock), SYS, HUB, MSD, PWR, DISP mean?