molex 4 pin

I'm trying to build a multi-GPU unit for machine learning applications, and I'm new to all this. A lot of the design is based upon mining rigs, with a few differences. I suspect that bandwidth will be important for my application, and so I hope to use PCIe 16x connectors between each GPU and...

Hey Stranger! After researching for 6 Hours straight with no success... I need your help Used equipment in this scenario: PSU: Thermaltake 630W, Corsair SF750 Cables: Generic 4-pin Molex Cable Pump: Standard Alphacool D5 Pump Tool to short the circuit: Paperclip I am currently trying to...

I just bought Asus rog strix 1070 OC 8G .. it requires 8pin Power connector.. but my PSU don’t have 8pin or 6pin. Can i use Dual Molex to 8-pin converter to power my 1070? Ps: My PSU is 600W 80+ bronze

Hello, I've recently bought some new fans for my pc, and while when there were only 3 it was almost silent, now with 6 fans running at full speed all the time, it's like a ventilator in the room. The thing is, my fans are argb from Aigo Darkflash and they connect to Aigos included hub, which in...

I have multiple fans with 3 pin and molex connector. Can i plug in the first fan to motherboard header and the second fan into the first fans molex connector for power from the first fan? Sorry if confusing, and to add no i am not attempting to plug molex into psu.

My first post on the forum, so please let me know if I've done anything wrong. My friend has offered me a GTX 1660 Super for a very low price to replace my current GTX 1060. The 1060 only requires one 6-pin connector so no worries there. However, 1660's need an 8-pin. I know people have used...

My 3 Molex chassis fans are "daisy chained" and connected directly to the PSU, making them run at 12v, full speed and very loud all the time... my Asus Prime B450M-A has a CHA_FAN2 empty connector right over the CPU_FAN connector, if i get a Molex to 3-pin cable can i connect them all on the...

Hi!! I have case with one Fan RGB have molex pin for power in PSU but i want add this fan in motherboard MSI Z390 (pumb_fan1) (4 pin). How I do this?

I have modular PSU Antec NeoEco 550M which comes with Female Molex at the end of Sata Power cables ( may be for older HDD's). My case had Fan hub with it, but its power cord is also female molex :( I am not able to get male to male molex cable where I stay.. Any suggestions on how i can make...

Hi i have 4 rgb fan for pc case but I only have 2 big molex 4pin available in my PSU. Is using a splitter like the picture bellow safe to use? I want to use 2 of those splitter for each molex in my psu so that i can use all 4 rgb fan. My PC specs: i3 2100 Asrock h61m vs3 8gb ram Inplay GS450...