Just finished building my PC. When I had everything tucked away, I powered it on and made it to the BIOS screen. I powered it off, cleaned up the table a bit, plugged in my mouse, keyboard, and USB to update the BIOS, powered it on and now I get the amber VGA debug LED on the motherboard. All...
Hi,
I've recently run into some issues with my PC.
My PC specs are as follows:
CPU: 5900x
GPU: MSI Gaming X Trio 3080 (Replaced the backplate for one from EK, and replaced the thermal pads. Memory temps do not surpass 76c).
MOBO: ROG Crosshair VIII Dark Hero
RAM: G.SKILL Trident Z Neo (Model...
I installed a new motherboard B450 Aorus M with a new cpu AMD Ryzen 9 3900X and it doesn't start up. When turning it on the 4 LEDs starts out with CPU, quickly goes to Dram, quickly to VGA for about 3sec and last to boot. None of the LEDs stay on, not sure if the LEDs turning on 1 by 1 is just...
So I just received my new custom built gaming pc off of Ebay and immediately upon turning it on, I am already experiencing no boot or post, no signal, no spinning fans, and 2 red led lights on the motherboard. One for where there's a "START" button, and one for the CPU. They both stay on...
Hi,
So I recently built my first PC and everything worked great. However, I had my front fan RGB set up to a control button on the case and a molex cable on the PSU, and I wanted to be able to control the RGB through my motherboard. So I disconnected the molex, disconnected the fans from the...
I just built my first PC and got it up and running. Windows was doing a update and the monitor, mouse, and keyboard was off when I came back to check on it. The computer would not post anymore when I turn the PC on. Everything lights up and powers on but I have no power to mouse or keyboard and...
I wanted to ask if anyone could give me or point me to some information regarding this series of hot swap cages. Possibly general info on their cages would work too since they seem to be a similar design. I have looked around a bit and havent found detailed information. I have also contacted...