Parallel

Hi! I'll start with specs: XSPC Raystorm Pro CPU block EK-FC1080 GTX TF6 GPU block Alphacool D5 Pump running at 3000 RPM HW Labs GTX 480 + HW Labs GTS 420 Radiators. So, after a lot of testing, I noticed that GPU reacts very well on increased flow, while the CPU doesn't care much. In the case...

I need advice. I have the next parts: "D5" from Alphacool XSPC Raystorm Pro EK-FC1080 GTX TF6 HWLabs 480GTX HWLabs 420GTS Alphacool XT45 360. They are currently connected in series: Pump ===> XSPC CPU ===> EKWB GPU ===> Alphacool XT45 360 ===> HWLabs 420GTS ===> Res. GPU OCed to the limit but...

As I have learned from my last post (https://forums.tomshardware.com/threads/can-you-make-an-fpga-run-sequential-code-and-general-purpose-computing-what-would-the-performance-be-like.3476679/), that FPGAs will not outperform any CPU in serial computing, then how will they perform against GPUs in...

Hello, Literally wasted an entire day trying to connect my dial-up modem to my laptop via the parallel port, only to realise that it was actually a 25 serial port that had the exact same shape and pin locations I was so desperatly trying to get the LTP1 port to show up in my modem installation...

AMD Radeon R6 8GB ram AMD Quad core processor A10-7300 3.20Ghz

I'm going to buy new parts to build a new PC. And i'm not so good at hardware,so could anyone tell me if all these parts would fit together: Case: Corsair Carbide SPEC-01 Midi Tower PSU: Corsair CX 600M, 600W PSU Motherboard: MSI B75MA-P45 GPU: Geforce Gtx 760 2gb Harddrive: Seagate Barracuda®...