Hi
Would it be possible to use Kingston HyperX: 2x4GB 1600MHz CL9 DDR3 1.65v (khx1600c9d3b1k2/8gx) as dual channel and add to 2nd dual channel Patriot Viper 3: 2x8GB 1600MHz CL9 DDR3 1.5v (PV316G160C9K)? I assume I'd have to lower the HyperX voltage to 1.5v in BIOS somewhere (never done this...
So a few days ago I upgraded my 2 sticks of HyperX Fury 4GB 2133MHz DDR4 memory to 2 sticks of Patriot Viper Steel 8GB 3200MHz.
My motherboard supports only up to 2400MHz RAM, but I have read on the internet that faster RAM will just downclock to the mobo maximum and everything will be OK.
I...
Hello,
Its my first time i`m buying a cooler, so i thought i should be 100% sure that it fits my case.
Cooler that i want to buy: Noctua NH-15
My current case: DeepCool Kendomen TI Windowed Titanium Grey
Case dimensions: 491 x 200 x 486mm
Motherboard: B350 Tomahawk
RAM: Patriot Viper 4...
Hi everyone,
I just bough Patriot Viper 8x2 DDR4 PC-24000 3000Mhz. I also had 4x2 Patriot Viper 8x2 DDR4 PC-24000 3000Mhz which is working good. Both of them is identical also from exact same brand.
But after I installed the 8x2. Dxdiag, CPU-Z, and Windows detect it 24GB but why Windows 10 Only...
Hey guys I just got my new system going everything is fine except the a xmp profile won't enble or any ram speed higher then 2133mhz , the specs are MSI b450 tomahawk max , Ryzen 2600x & Patriot viper steel 16gb 4000mhz , if I enable xmp the system just reboots twice with no change same if try...