Forum discussion tagged with Phanteks.
  1. Q

    Question Does this make sense. Want to buy new case fans and CPU cooler.

    3 x Phanteks T30 intake in the front 2 x Phanteks D30 output through a Phanteks Glacier One CPU radiator cooler on top 1 x Phanteks SK output in the back (came with the case) Illustration here The numbers are just the name of the fan, the max airflow in CFM, the static pressure in mm H2O (not...
  2. raikuu123

    Question Motherboard LED is lit but won't turn on (not even with screwdriver) ?

    For some background info, I recently sent my old mobo for RMA and got this new motherboard because I kept getting a red q-led. Got this new motherboard and only plugged in my GPU, CPU, and ram. Worked just fine, so I put it in my case and then plugged in everything else. After finishing I turned...
  3. M

    Question 12VHPWR (PCIe 5.0) cable for Phanteks Revolt X PH-P1000PS, how many 8-pin (PSU side) needed?

    Hello everyone! I own a PH-P1000PS PSU. I recently purchased a NVIDIA RTX 4090 graphics card and I would like to buy a 12VHPWR cable. I am not sure what is the right cable to use for my PSU. I know PH-P1000PS is made by Seasonic, so I am looking at this Seasonic cable. However, it only has 2...
  4. A

    Question GPU RGB header as input for RGB hub

    My first time messing with RGB, so I’m not sure if the MSI gpu has a proprietary connector or the Phanteks Halo fan frames. This may be way out there, but I don’t have an RGB header, so I ran through all the options for getting RGB fans in my custom prebuilt PC that didn’t involve a new...
  5. W

    [SOLVED] D-RGB to RGB header ?

    Hello guys! I just bought the Phanteks eclipse p400A DRGB case but my Asus Prime B450M-A motherboard only has a normal RGB header with 4 pins while D-RGB only has 3. Is there a way to convert the D-RGB TO RGB Header or do i need something else? It's currently plugged in another cable that came...
  6. P

    Question Connecting PWM fan to DC fan connector

    Hello, i just bought 3 phanteks t30. I plan to run them in the 3k rpm mode, at a 0.36A input current. Two intake, one exhaust. Besides the cpu fan, my MSI z490m MAG has a pump fan (pwm) and 3x sys fan (dc) fan headers. I want to know the best way to connect the 3 fans. The sysfan dc headers...
  7. Isokolon

    [SOLVED] Phanteks 719 vs. Fracal Meshify 2 XL vs. something entirely different?

    Hello! I've got to switch to a new case and would kindly ask for some advice. my build currently: AMD 3700X Gigabyte Aorus X570 Pro GTX 1070 (to be replaced probably next year if prices return to reasonable levels) 3 3.5" HDDs 3 2.5" SSDs 420mm radiator (45mm thick) & a 1 D5-pump with a 150mm...
  8. D

    [SOLVED] New Ryzen 5900x PC Build Issue: USB device over current status detected

    Hi, I just built my first PC using the following components: Ryzen 5900x Crucial 32GB Ballistix DDR4 3600 Asus Rog CROSSHAIR VIII Hero Motherboard Phanteks Eclipse P600S Case Corsair RMx Series 850W PSU GeForce GTX 1070 WD_Black SN850 2TB Gen4 PCIe There are a couple of issues that I am...
  9. J

    Question Phanteks 719 RGB Front I/O

    I was thinking about getting the phanteks 719 as it has support/room for everything I want to put in it, it has the built in rgb strips that are controllable from the front io and I notice it has a cable for expansion for other lighting strips, would it possible to get the rgb portion of a fan...
  10. J

    [SOLVED] 10900k fan?

    Is this fan "Phanteks PH-TC12DX" good enough to cool the 10900k?
  11. Lodocarbo

    [SOLVED] Overkill Cooler? 420 AIO vs 360 AIO

    Hi folks, I am building my next gaming PC, in order to play games and possibly stream on my LG 34" 1440p ultrawide @ 144hz (LG 22" 1680x1050 second screen) ----> Partial build here I have already upgraded my RAM, and hopefully find a nice 3080ti to pair...
  12. A

    [SOLVED] Replace stock case fans with Noctua NF-A15 HS-PWM 140mm?

    Hey guys, is it worth upgrading all of my stock fans? Currently, I'm using the stock fans of my case ( Phanteks P600S, 2 140mm in the front as intake, 1 140mm in the rear as exhaust, nothing at the top) and I'm thinking of removing all of them and putting 3 Noctua NF-A15 HS-PWM 140mm in the...
  13. .snck

    [SOLVED] Getting confused with rgb fans and cases

    Hey guys. Please elaborate on me because the more research I'm making the more confused I'm. My current build is overheating (OC'ed RX570) and I want to upgrade the case and fans... I love the look of nzxt but they are pricey (h710i, h510 elite) and they have weak airflow. I would like to buy...
  14. V

    [SOLVED] Which PC Case Should I Buy?

    The case that I have right now doesn't look so good and has pretty bad airflow. I am planning on buying a new one next week. My full PC specifications: Ryzen 5 1600 3.6 GHz CPU, GTX 1060 6GB GPU, 16 GB DDR4-2400 RAM, ASRock AB350 Pro4 Motherboard, 2 TB HDD, 250 GB M.2 NVMe SSD & Seasonic FOCUS...
  15. V

    [SOLVED] Need help deciding on AIO to use for CPU cooling!

    Hey Guys, I am building a new PC very soon (just waiting for Ampere to release) and am having trouble deciding on my CPU cooler, so I was hoping for a good recommendation. I will be cooling a 10900K inside a Phanteks P500A. I would prefer to use an AIO as I like the look. It doesn't have to...
  16. V

    [SOLVED] Front mounted radiator or top?

    Just wondering what is ideal for a 360mm AIO. Currently looking at using the Coolermaster MasterLiquid ML360R unless someone recommends anything else. If I mounted top I would have the fans exhausting and if front they would be intake obviously. Also, would be mounted in a Phanteks P500A FYI...
  17. V

    [SOLVED] Thoughts on Cooler Master Masterliquid ML360R

    Hey guys, So was thinking about using this AIO for my upcoming build and was wondering if anyone has had any experience with it or just has an opinion. Reviews seem pretty good online but I just want to be 100% sure. I’ll be cooling a 10900K with it in a Phanteks P500A or P400A case (Still to...
  18. V

    [SOLVED] Phanteks P400A D-RGB or NZXT H510i

    Hey guys, I am just about to build myself a brand new gaming pc and am having a bit of trouble coming to a final decision about my case. As the title suggested I am tossing up between the Phanteks P400A D-RGB and the NZXT H510i. I understand that cases and aesthetics are personal preference...
  19. T

    [SOLVED] Phanteks Evolv X dual system: advice needed for cooling options

    Hey, new guy here. Hopefully i'm in the right forum for my question. I'm currently in the process of building my dual system inside a Phanteks Evolv X case and i'm unsure about how to arrange the cooling options. For the mini ITX system, that is mounted on top, i plan to use a Ryzen 3600 and...
  20. devilgodspider

    Question Phanteks Evolv Shift Air - clearance questions

    1. What are the measurements allowed for a gpu in order to accommodate a gpu AND a fan below the gpu? 2. Can the Riser cable be exchanged or is it soldered like the previous version of the case? (Evolv Shif) Really need the help guys, or if you have any better options around the same budget...
  21. W

    [SOLVED] Phanteks P400A Digital Case - Radiator concern

    Greetings fellow builders, I am currently looking at the P400A after watching Gamer Nexus' review on it. As someone who currently owns a Core V71 case, I need to downsize. In my current rig I run the Corsair Hydro H100i for my 4790K, (this one). I went...
  22. hakar.ahmed

    [SOLVED] PC Temps too high on Phanteks Evolv Shift? Help!

    I have upgraded to a GTX 1080 plus and 9600K CPU(not overclocked). I am using a Phanteks Evolv shift case and when the glass panel is on, the CPU temps reach 80-90 Degrees on load, playing Rdr2 ultra @ 1440p. The GPU goes up to 82 degrees and does not go past that. I am not sure if I should...
  23. user.anonymous

    Question Radiator Confusion! The pins do not seem to match up!

    Hello Currently, I am finishing my build on my PC but I am concerned with my radiators. The fans were preinstalled to the case, but I have not gotten the opportunity to actually unscrew the cover for either fan. In my case, I have four unplugged in wires. Two of them are 3-pins while the other...
  24. Citizen SLI

    [SOLVED] Phanteks ENTHOO 719 Fan HUB Question

    Good morning! I have a question about the Phanteks Enthoo 719 Case and was hoping someone might have some insight or tips on how to use the included FAN HUB with it. I haven't build a PC since the AMD 8150 so it's time for an upgrade. Back then I wasn't interested in RGB because it wasn't as...
  25. SSJ1NOT

    Question Help!

    Many posts on forums says that the noctua nh-d15 Will fit with low profile ram as corsair Vengeance lpx (31mm they say). I bought the ram and cooler, but i still get a little preasure, when i try to close my case. I have phanteks Phanteks Eclipse P400A RGB Black. Can someone tell me what i am...
  26. P

    Question Don’t know how to make the D-RGB fans work.

    So i have had this build for a couple of weeks now, and i’ve overcome all the problems i have had. Although the RGB fans i just cannot get to work. The cables came with the case and i’m using the Phanteks Eclipse P400A. I just need to figure out where this cable would plug into. If you need any...
  27. D

    [SOLVED] Fans and rad setup for a Phanteks P400a D-rgb case

    I'm not very well versed on push/pull/intake/exhaust/fans/aio etc. so I'm looking for a simple setup for my new build. The front of the case has mesh with no dust filter, and three stock 120mm rgb fans that I think are set to intake. I'll stick with these. Other than that there is room for one...
  28. L

    Question Airflow Conundrum.

    As the title suggests my PC is having a BAD issue with the airflow, and I am at my wit's end to fix it. To elaborate, I recently switched cases, from a cooler master elite 130 to a new Phanteks Enthoo Evolv ITX. Initially when I made the switch my GPU overheated even when it idled (around...
  29. P

    Question Will this fans be compatible with this case ?

    Hello, i found a case for a good price Phanteks Eclipse P300 and i wanna add 2x 140mm be-quiet! Pure Wings 2. I wanna know if they sit in case and where exactly i need a plug them in to a motherboard. Thanks for every respond ! Links: PSU:
  30. F

    Question 2080 ti custom AIO cooling project

    Hi everyone I'm a owner of a 2080 ti FE. It's a good card but I want improuve : Noise Temps Performances So I was thinking about a project and I was wondering if is too mad (or stupid) or if is moreless sensed and safe I'm planning to buy a kraken g12 (should be compatible with a 2080 ti) and...
  31. B

    Question MSI B450I GP has EZ Debug VGA LED

    Hello, I have a problem with my Motherboard and my new case. I have the MSI B450I Gaming Plus AC and just got myself a Phanteks Enthoo Evolv ITX. I tested the mobo before in my old big atx case (it fitted) and it worked like it should. Then my new case arrived and I installed it. After I...
  32. P

    [SOLVED] Is nessesary to have all fans in this case ?

    I found this case in good price and great design. However it includes only one fan. I don't know if staying with 1fan is a good idea. Anyone who have experience with this case or similar with only one fan ?
  33. N

    Question Best budget m-atx case?

    So I want to buy a new PC case, M-ATX form factor(except one), I managed to narrow down the suspects(lol) to 11: Cooler Master Masterbox Lite 3.1 Cooler Master Masterbox Q300L Cooler Master Mastercase Pro 3 Cooler Master N200 Cooler Master Silencio 352 Corsair Carbide 88R Thermaltake Versa H15...
  34. chibamarco

    Question Audio Codec question.

    Hello, topkek. So, Im finally making my PC in a month, but Im pretty confused about a thing. And said thing is the Audio Codec. (Here is an important thing, I have been using the audio codec from my crappy laptop all my life, so every good change matters.) I am planning to get one of these...
  35. Z

    Question Computer Randomly Freezes

    A few weeks ago I had to replace my RX-730ss and I also decided to upgrade from my AMD FX-4170. Once I booted up with the new parts in I began experiencing freezes at random, the cursor wouldn't move and the keyboard wouldn't respond (Num Lock and such lights wouldn't change). For the last two...
  36. F

    1600mhz RAM can work on 1066mhz supported motherboard?

    My motherboard is Intel DG41WV. It's can support on 800mhz/1066mhz and if i buy kingston ddr3 4gb 1600mhz RAM, then I really dont know about is it work. What you think about it…? Please help me
  37. F

    [SOLVED] Msi gtx1080 gaming x flickering pixels and artifacts

    Good Evening. I have a msi gtx 1080 gaming x card. Used it fine for over a year. Last week my son overclocked it with msi after burner(he watched an overclocking video on youtube) and the card crashed with pc shutdown. Pressed power button pc would blink for a split second but won't turn on...
  38. G

    Shinola Canfield Bluetooth In-Ear Monitors Review: Luxury Sound, Luxury Price

    The Shinola Canfield Bluetooth IEM offers great sound and battery life in a striking, opulent design. Shinola Canfield Bluetooth In-Ear Monitors Review: Luxury Sound, Luxury Price : Read more
  39. RagingRabbits

    Will this SSD and RAM work in my laptop ?

    My laptop is a HP 14s-cf0042tx I was wondering if this SSD and this ram...
  40. Z

    [SOLVED] Can ASUS Maximus XI hero work with one stick 8gb ram?

    I eventually want two sticks to bring it up to 16gb, but my budget only permits one stick. Will my computer still work using a single stick of 8gb? Mb: ASUS Maximus XI hero Ram: Corsair Vengeance, 8gb 2400mhz CPU: Intel I5 8400 2.8ghz GPU: EVGA GeForce GTX 750 ti Power supply: EVGA...