Forum discussion tagged with plc.
  1. S

    Question Is a speed rate of 150 mbps okay for a TP-Link AV1200 WPA7517 powerline adapter ?

    Hello Guys, I recently bought a TP-Link AV1200 WPA7517 Powerline Kit: to get a more stable internet connection in a room where the WiFi suddenly drops sometimes and is very annoying (apparently caused by the WiFi disrupters in...
  2. C

    [SOLVED] PLC Connection decimating download speeds

    I recently bought a TP-Link PLC connection to connect my pc via LAN to the router, as WiFi coverage isn't that good on my room. However recently my powerline connector has been running at lower than 20% of it's speed (I'm getting about 7-8 Mbps download and 1-1.5 Mbps upload on a 48-49.5 Mbps...
  3. Omeggga

    [SOLVED] is it possible to replace an ethernet port on a PLC adapter?

    I own a TP-PA4010P kit, it works wonders. My only issue is that the ethernet port is a flimsi 10/100mbps port. The device itself can stand up to 600mbps, so would it be a good idea to simply replace the port on the device to take full advantage of my 300mbps speed or get a new one?
  4. E

    [SOLVED] Poor PLC speeds

    Hi, I live in a house with three floors and because there was no space to fit another cable for internet through the walls, the PC in my office (2nd floor) is connected to the modem (ground floor) via PLC. This has been working mostly fine for years now, but last week there were three days where...
  5. K

    Question Powerline speeds are too low. No common solution has helped.

    So I have two powerline adapters one connected to the router and the other connected to an AP. My internet speed is 45mbps. Everything worked fine and I used to get >40mbps from the PLC. Untill one day without any reason speeds went under 10mbps (most of the time under 5). No changes were made...
  6. C

    AC Black Flag SweetFX problem

    Okay, I think this problem will require an expert to solve, I would really appreciate if someone could help me with this. I am trying to get this preset to work with AC Black Flag on my Windows 10 Pro 64 bit : The injectore you have to use with it is...
  7. V

    GTX 460 underclocked and still overheating

    I'm running my GTX 460 at about 640Mhz clock and 1350Mhz Memory clock and the voltage is down to about 860mV. Still the temperature without any use is about 43ºC and with full use it goes up to 83ºC easily. The fan is at Max RPM. I've already changed the thermal paste with Silver Arctic 5...