Radiator fan

DeepCool LS320 120mm AIO 220w TDP 4th Gen Dual Chamber Pump Z690 Pro RS - motherboard The DeepCool has a cord that connects the pump to the board and another cord that connects to the fan. The fan it is connected to isn't spinning. I checked the BIOS but (tbh it's a little confusing) I only...

I have a Corsair Hydro 100i AIO, 240mm Radiator with 120mm fans. I'm trying to use the H510 Elite's case fans as the primary fan for the radiator. Is this viable or should I just stick with the fans I got with the AIO?

Hello, I have a question about the fans always being on the lowest setting set by the BIOS. I want to give as much information as possible so I can get the best possible answer, so here it goes: My motherboard doesn't have a dedicated AIO_PUMP connector, so at the beginning I connected the 3...

So i have a EK Xe 360 and I'm wondering if I can do push pull with different fans. The radiator will be at the bottom of my o11-xl with my 3 Riing trio high static pressure fans on top pushing and 3 Noctua NF-F12 at the bottom pulling. Riing trio fans rpm are 500 ~ 1500 and Nf-f12 doing 300 ~...

I'm trying to OC my i3-8350k, but at the temperatures my liquid cooler caps out at, I can only get it to around 4.3 GHz. I'm on a budget at the moment, and started wondering if I could just upgrade the case fan on the radiator. Would a faster fan make my liquid cooler more efficient?

Hi, I have i9 9900KF cpu and eventualy I found out that my COOLER MASTER HYPER 212 BLACK EDITION is not enough to keep my cpu on low temperature when I push it hard. I bought myself COOLER MASTER ML360 liquid cooling system. This will be my first build with water cooling and I have few...

Hey guys, I have a corsair H45 Liquid CPU cooler and i want to replace the fan on the radiator with a coolermaster MF120R rgb fan. My question is, how much will the cooling be affected ? The radiator is mounted behind the front fans as intake. Any replies will be much appreciated :)

My computer turned off randomly about a week ago. After turning it back on it was showing that my cpu temp was high. It showed my fan speed was not working. I just decided to get a whole new radiator and fan to install. After installation there is no changes the temperature is high I took off...

Greetings. I have 3 radiators, one of them is 120 mm, 45mm of thickness and 12 FPI. I wondering, should i use high static pressure fan for this rad? Maybe the normal case fan such as Noctua will be enough? I want to underline, what for the rest 2 radiators I using high static pressure fans...

My plan are making sffpc with using 240mm aio. But i change the fan with xt140 who have 120mm mounting holes. Is it possible to do that? or i should use 280mm radiator instead? *If it possible is there any difference in performance?

I owned a h100i gtx previously and the noise was really bad. Has kraken x61 got the same noise? Thanks