Radiator Fans

So I noticed one of the fans in the AOI cooler is struggling to spin now, when it was ok before, I assume it might be dying, it wont go higher than say 200 rpm. I was thinking on replacing both fans so that they would match. I'm no expert on fans to be honest so I am unsure if this Cooler Master...

I'm planning to use the CORSAIR iCUE H150i RGB PRO XT 360mm AIO in a TD500 Mesh case from Cooler Master. I only want to mount the AIO at the top. Will that be possible? I saw their website, saw a bunch of videos. But I'm not completely sure. Have any of you done that? Thanks for your time!

I remember watching a video (I think it was from Gamers nexus or JayzTwoCents) but I cant find it anymore, It was about testing radiators with fans on one side vs fans on both sides. Apparently depending on the Thickness of the radiator and the fin density, having too much fans caused the...

Hi Guys!! I know in general Push - Pull setup is always better but I'm still asking because I'm restrained on space and i have to make a buying decision on Fans. I have Max 90mm[At Most] space in my cabinet for placing 60mm thick Radiator[Top]. Radiator and PC Case I can setup any of: 3 x...

Hi I’ve started building my new pc setup and got the NZXT kraken x63, it has 2 rad fans and I only just found out that I’m supposed to plug them into the cpu_fan on the motherboard (I guess I wasn’t thorough enough with my research). Now the issue is, that I only have 1 cpu_fan output from the...

Question about best fan placement through out my case. Right now I have a o11 XL with an Ek xe in push/pull intake at the bottom. I also have a nemesis gts 360 in push exhaust at the top, 1 back exhaust fan and 3 intake fans on the side. Is this the most optimal set up? or maybe switching the 3...

Hi, I have i9 9900KF cpu and eventualy I found out that my COOLER MASTER HYPER 212 BLACK EDITION is not enough to keep my cpu on low temperature when I push it hard. I bought myself COOLER MASTER ML360 liquid cooling system. This will be my first build with water cooling and I have few...

Thinking about upgrading my rig with AIO water cooling. Due to case limitations, I would be mounting my radiator on the front of my case as an intake. My question is, would it make much of a difference if the radiator fans were inside of the rad vs. outside? Aesthetically I would rather have...

My plan are making sffpc with using 240mm aio. But i change the fan with xt140 who have 120mm mounting holes. Is it possible to do that? or i should use 280mm radiator instead? *If it possible is there any difference in performance?

Hi, I'm new to water-cooling so excuse me if I sound like a noob cuz I am. Water-cooling Setup: Motherboard - Asus ROG Maximus XI Formula CPU Block - EKWB Velocity D-RGB Pump/Res Combo - Thermaltake Pacific PR33-S Radiator - Thermaltake Pacific CL480 Radiator Fans - 4 x Thermaltake Riing Trio...

Hello all, I recently bought this Super Tower PC case by Thermaltake: https://www.newegg.com/Product/Product.aspx?Item=9SIA6ZP56V9910&Description=thermaltake%20900&cm_re=thermaltake_900-_-11-133-327-_-Product I have a 9900k CPU and currently have this air cooler rated at 230W...

Hello! I was wondering: Does TV's fake refresh rates, help with screen tearing? :??: By fake I mean "clear 100hz, natural motion 100hz, mega ultra super giga it's over 9000!!...hz". :) I know what that does. But is it good for gaming? All of them say to use your TV in Gaming Mode when playing...

I decided to get 8gb+ more RAM for my PC. So I installed the RAM and my PC display wouldn't show up (Use DisplayPort so I can utilize 1080@144hz, which HDMI isn't capable of) , So I went and reset my CMOS, didn't work. I then took out my GPU to run on-board Graphics, that ended up working. So I...