raid

I have suddenly lost the RAID 0 array on my system and had the RAID 1 marked as critical. These are two arrays spanning the same two hard drives. It appears that the second drive is no longer detected as part of the array. My hardware is an Asus Crosshair VI Hero, which has been running fine...

Win 10 64 and apps are on a SATA SSD, all data on two 8TB HDDs RAID-1 mirroring via Storage Space. I had used (and preferred) hardware RAID on previous Intel systems, but when I put this one together 6 months ago I wanted to keep things simple and went with AHCI SATA (CMS enabled, so not full...

Setup: ASUS Prime Z390-A Western Digital 2.0TB x2 Samsung 840 EVO 1.0TB SSD Samsung 850 EVO 1.0TB SSD I have Windows on one of my 2.0TB magnetic drives, and wanted to use the ASUS EZ-Tuning feature to set up both the SSDs in a RAID 1 configuration. After googling a bit and checking the manual...

I have a Dell Optiplex 990 and a Mediasync Probox 4 bay non raid external enclosure. I have a 2tb drive in computer now and three 2tb WD red drives. I want to create a raid (possibly 5) set up to boot to. The bios has raid but not seeing where I can set the type. So, looking at SPM393...

Hi Guys, I've been using freeraidrecovery software on my personal broken NAS storage hard drive. I manage to get the correct raid configuration on the first scanning but due to forgeting to insert another extra 4tb drive i need to redo. On the second scanning, physicaldrive0 somehow broken...

I have a friends MSI Laptop that I fixed the other day. It had a corrupt Windows 10 when it came in from Amazon. I wiped the hard drive entirely and installed a completely new windows on the HDD(not the SSD). This laptop has a 15 GB M.2 SSD and a 1 TB hard drive. The computer was slower than...

Hello, I just want to verify that I am doing Maths correctly when it comes to RAID 10. I have 4 - 2.5 TB SSD hard drives I am looking to run in a hardware level RAID 10 that I believe should total 5 TB as seen by the OS. Is this correct? Thank you!

After a bit of finagling, I've managed to get Windows 10 installed on a hardware RAID 0 volume, striped across 2 SSDs. I'm running on an MSI A78M-E45 Mobo, I have a Large internal HDD for bulk storage, and an optical drive connected to two other SATA ports. I had to set the SATA controller to...

I currently have around 12TB of data (pictures) spread across several external drives and one drive being in Raid 1 and I'm trying to clean the mess I've made now. So I recently purchased two 24TB G-RAID drives because I wanted to simplify how I store my pictures with the added redundancy...

Hello. As you already saw, the problem is I cannot enable RAID on my SATA ports 3 and 4, they are locked to AHCI and I cannot change it, because they are marked as "external" in the BIOS. I have 4 Patriot Burst 240 GB SSDs that I want to put in RAID 0, but I can only change 2 of them to RAID...

Hi all, Just purchased a used QNAP TS-453BT3 for video editing and the original owner had installed two 256gb M.2 drives for caching. At the moment, I'm shopping for drives to populate the NAS and am wondering how much of a practical difference will exist between a drive that has 128mb vs 256mb...

--CONTEXT-- Greetings, everyone. So, over the past five weeks I've been dealing with a corrupted ssd after I unplugged the desktop from the power socket. I was getting impatient when the computer took longer than usual to boot up. Bad move, I know. I've been learning that the hard way. About...

CONTEXT: So i built this PC for a friend last week, it has an ASUS B360M-A motherboard, an intel 9400F processor, one SATA3 2.5" SSD (new) and one SATA3 HDD (used). To be able to use the 9th gen processor, i used an 8th gen processor to install windows 10 in the SSD, and ASUS Ez update software...

Hello All, My first post here, I'm hoping to get a better understanding of an issue that I have been faced with. I had a 4x 4TB WD Red drive array running in RAID5 on a ASRock Rack C2750D4I mobo, unfortunately for me the board died and I now need to purchase a replacement, hoping that I can...

I am having some difficulty setting up RAID on an ASRock FM2A68M-DG3+ Mobo. When I run rcadm.efi and enter rcadm -M -id -d 0 1 to initialize the drives I get the following message: Uninitialized disk or disk with unknown state found Unknown Online, Disk 0 Before I go an alternate route, I...

MB: MSI B450 Tomahawk Memory: Corsair Vengeance 16 gb ddr4/2400 CPU: Ryzen 1600 Storage: 3 x Samsung Evo Asus DVD drive. I have a strange situation with setting up RAID 1 on this MB. I set the SATA Mode to RAID in the BIOS and boot the machine up. I <ctrl>R are the top of the boot up and get...

Hi all, I have a Dlink DNS 323 nas and I just bought two 2gb HDD. I want both to be the same, but not use Raid 1. I want to do it manually. So I have all my files on the first HDD. I want to insert the second HDD and copy the files from the first HDD to the second HDD. instead of doing it...

Hello, today I wanted to see something in the bios of my pc and I found out that I could choose between ahci or raid. I was wondering which would be better for my pc? My pc: https://progear.no/produkt/progear-kratos-themaltake-p3/

Hello i am trying to setup a raid on mobo asrock x399 - as manual said to switch SATA mode to RAID - but after that i cant boot from any hdd (i can only see a usb drives) even with that i cant see any array to create too (only see all drives in list without arrays) manual...

So I got two SSDs, 256 and 1TB, I have most of my stuff in the 256 since I got that first. I started storing useless files in the 1TB...&Now I'm running out of space in the 256. Is there a way I can swap these? What I'm thinking is making a split on the 1TB, and transfer everything from 256 to...

My VM can't see the second RAID array on my server system. I have a Dell PE2900 with ubuntu server installed on a small RAID array set aside for the OS. I have a second larger array for working with.. plan to use it for storage and serving up a game online. when I create a VM the only drive...

A quotation I received from local shop The Final Spec List:- Intel i5 9th Gen 4.2GHZ 6C 6T.OC Extreme Overclocked Arctic Alumina AS5-12G Syringe Thermal Compound 120MM LGA 1151 Cooler Gigabyte H370 ITX Mbo 128GB DDR4 SUPP. 16GB DDR4 RAM OC 2400Mhz XMP Low Latency HS RGB OpenGl and Cuda...

Hi, I have setup a PC based on a Gigabyte X470 Aorus Gaming 7 Wifi + 2700X. I have the following disk attached: 500GB Samsung nvme disk on m2.1 Sata0: Samsung 250gb ssd Sata1: Samsung 250gb ssd Sata4: WD RED 3TB Sata5: WD RED 3TB Obviously the two WD disk are for storage / backup. Any...

So my server has a raid array Logical Drive 1 showing critical status so i go to view what it is. one of the 2 drives shows up as missing (see photo below) I cant find a way to get the drive back into the array when i view the unassigned drives the drive that is missing is there (see photo...

So StoreMI is incompatible with any non-AHCI drive configuration. Is there any info regarding the comparative performances of each? (this is said from the standpoint of someone who has access to both) Update: if you come across this, I misread what StoreMI does and my question is no longer valid.

Would any know why this is not allowing me to create a RAID? SCREEN CAP: View: https://imgur.com/PRR6ANP