rgb 120mm fan

I have installed the fan and plugged the main connector into the mobo for the cpu fan. I have a secondary wire for the RGB which I have located on the mobo but when I plug it in, it doesnt fit securely and no lights turn on and no colors are present. The fan run and works, just no lights...

Hi, So i bought the 6pack kit of darkflash dr12 pro rgb fans and I connected all 6 fans to the hub, in order, so from 1-6 (there are 8 connection points), then I connected the hub, which is molex to my power supply, so the hub is powered, ass well as the fans, but when I turn on my pc, the fans...

Hey guys going to build a new Ryzen 3600 build and dont need my computer to look like a unicorn.. just want some static red fans that also do work, will need one SP and 5 AF. everything out there now seems to be unicorn barf and ridiculously overpriced, assuming it is because you can make them...

hi can u plz tell me if my motherboard gigabyte z87x-ud3h support rgb fans?

Hoping someone can help. I have 6x Aerocool Eclipse ARGB Fans which are connected to a 6 fan hub which is controlled by an RF remote (controls fan speed, lights, etc etc). If I run the fans on low speed, I get the LEDs flickering on several of the fans. Ie, on orange they'll keep flicking white...

Hi there, needing some help in regards to setting up some RGB fans for my PC For my MB I have a Gigabyte Aurous B450 M. My friend recently gave me 3 Corsair RGB fans he wasn't using, I cleaned them up and figured I'd install them, hes not sure exactly what model they are, but they are 120mm and...

I have: NZXT H710i case, comes with 4 NZXT fans - cam hub 3x Corsair LL120 - got two hubs in the box, one much larger than the other and my MOBO is the Crosshair VIII Hero. What is the best way to configure all of these? Is there one software I could use to control the speed and then just...

Hey everyone. I recently had a problem with my pc and had to fix up some parts. While fixing the problem I decided to get new rgb fans for my case. I have a gigabyte Z97M-D3H LGA 1150 motherboard. I was wondering if this board would allow me to use and customize the lights on the fans using the...

Hi, recently I bought 5 Cool Master Masterfan MF120 A-RGB fans. Problem is my MSI B450 Tomahawk Max doesn't support the 3-pin led connector. With the 3 in 1 came an "A-RGB LED SMALL CONTROLLER". Because I wanted to sync all 5 fans, I bought the RGB LED controller. Problem is that these support...

I have an rgb case with 4 rgb fans as well as actual lighting on the case, i was wondering if the asus h270 plus motherboard would support these, i know the connectors are all correct but was just worried that the lighting wont work

Hey everyone, Currently on the market for some new fans, however I'm seeing lots about decibels and CFM, etc. Am i right in saying that the more CFM the louder they are. I currently have the fans listed below. Does anyone have any recommendations for RGB fans that are quieter or the same as...

Hello guys, sorry if my question has been answered somewhere in the forum but still, I can't understand how I can solve my problem! I have the Asrock B450 Fatal1ty K4 with 2 Coolermaster RGB fans(in the front) connected in the 2 RGB headers and a non-rgb fan in the rear. I have also a RGB led...

Build: https://pcpartpicker.com/list/kbbm3t So what im trying to do is connect all rgb components in my build through asus arura. Ram, Gpu, CLC Cooler and rgb strips with it, and 6 deepcool 120mm RGB fans. I know the ram and gpu should just work... Im not sure about the deepcool CLC in...

So, me and my friend are confused about how the lighting node core works. The Asus Prime z390-a MB doesn't have 5 fan headers when we wanted a full RGB setup. We were just wondering whether the node core provides both the power to all the fans and if it is able to control the RGB on all the...

Hello, so recently I built a pc and I've really struggled to get the rgb fans in the front to light up properly (only one lights up at the bottom). I was disappointed when I received the case because it didn't come with the fan power hub or any of the stuff that generally comes with the matrexx...

Hey everyone, I was just wondering if this: https://antec.com/product/cooling/prizm-120-argb-32c.php RGB fan kit with 3 RGB fans and 2 LED strips would be compatible with Cooler Master's ARGB controller. My motherboard doesn't have a dedicated RGB header so if these work together it would be...

I wanted to buy these fans, but before I do i want to make sure they work. I know my motherboard cant control ARGB, but i was wondering if i can still control them using the controller or something. (I don't know too much about all the different numbered pin connectors and all the wiring, that's...

Hello guys.. I'm really lost right now. I want to buy RGB fans for my first PC that I built, but I don't know if my motherboard supports it. It's ASRock Z170M Pro4S Reading the manual didn't help as I found no mention at all of RGB. Put my PC part picker build still lists RGB fans as...

Hello Apologies if I have phrased some of these question in a noob way, but I’ve taken the plunge and building my first PC so not entirely confident that I understand it all yet... question.. Does anyone have experience with thee cheap Chinese manufacturer fans, and if so have you managed to...

Hello Folks, I bought an AvP Arion RGB Mid Tower Case which has 3 addressable RGB fans (Novatech link below). https://www.novatech.co.uk/products/avp-arion-rgb-mid-tower-case/f3-330.html Problem is that my board (MSI B450 M Mortar) has a 4 pin RGB header and the 3 RGB fans have a 3 pin end...