Forum discussion tagged with Standard.
  1. Z

    Question Logitech Z906 + ASUS Xonar not working

    Hi guys I have very annoying problem. I have just received a new PC build by Novatech. Everything run smooth and nice expect the sound. Actually there is no sound at all. Control Panel/Sound Settings shows that thhe sound is present, so I assume the sound card works properly. At the same time...
  2. L

    [SOLVED] Is My Monitor Beginning To Fail On Me?

    Hi there, I recently purchased a Dell s2716dg from Best Buy and have been happily using it for the past 4 months. I use a display port for my input and always have 2 USB ports being used for monitor back lighting and a light up RGB mouse pad. I recently have moved my setup into a different room...
  3. I

    Question (Resolved) No signal after installing Nvidia drivers

    I installed Nvidia drivers for my 1030, the monitor shows no signal it boots it posts, but no signal, works when I uninstall, the nvidia drivers and connect the dvi cable to the card, also works when I connect the vga cable, it only shows no signal when I install the graphic drivers software...
  4. S

    Question Stuck in boot loop

    PC info below I went from 2x8gb DDR3 hyperFURY sticks to 4x8gb and I get the boot loop. I've tried upping the voltage to 1.6, nothing. I've taken out the battery, dropped a duece, put the battery back in, nothing. I updated my BIOS, nothing. Since I bought a single, a single, and then a 2...
  5. D

    Question Should I upgrade my cpu or my gpu?

    I currently have a i7-5820 with 16gb ram and a Geforce 980 videocard. I would like to do an upgrade but not sure if to do the cpu or the gpu. My first thought would be to get a new mb and i9-9900 and keep my 980 graphic card. Or keep my i7-5820 and change my video card to a 2080. Thanks for...
  6. Tayoesicc

    Question Switched to a new Mobo having problems with USB 3.0 Port

    I just switch to a x470 gaming msi mobo and the front usb 3.0 panel everytime I go to connect something it spams the connecting sound and makes the pc laggy (changing volume goes all weird) any ideas?
  7. S

    Question 100hz ultra wide or 144hz?

    I'm concidering the MSI Optix 34" MAG341CQ vs the MSI Optix 27" MAG271CQR. They're pretty much the same monitor, except the MAG341CQ is 100hz ultra wide and has a slower response time. I'm mostly planning to be gaming things like The Witcher 3, GTA and Metro. But I'll also be casually gaming...
  8. AbdelrahmanMD

    Question TV shaking image

    Hello I have a Samsung Smart TV N5300 the 43 inch variant and have been using it without issues for 3 months when suddenly while watching it, the screen starts shaking very rapidly while the audio is still fine I unplugged all connections then inserted the power cord alone with no result. Even...
  9. T

    Question Motherboard standoffs that I need?

    What is the name if the long and short Mobo standoff?
  10. aieth

    Question Sound card, amp/dac or for my Sennheiser 58x Jubilees?

    As the title suggests I'm wondering if I should pick up a sound card or an amp/dac for my Jubilees that I got recently. The one I'm looking at right now is the Creative Sound Blaster Z. Should I invest in one or should I just use my onboard soundcard? (My onboard sound card is Supremefx)
  11. L

    Question ASUS laptop with multiple issues (audio drops/delay, stutters and pauses)--please help!

    (Second time doing this... here's hoping it'll go better than before.) About a year ago, I was ill-fortunate to purchase an ASUS FX503VM laptop. SPECS: Intel Core i7-7700HQ Quad-Core 2.8GHz Nvidia Geforce GTX 1060 3GB 128GB M.2 SSD 1TB HDD 16GB DDR4 RAM Windows 10 Home...
  12. G

    Question Portforwarding/networking issues

    So I've been trying to portforward for a few days now and seem to be running into nothing but problems. As far as I know I am doing everything correctly 1: I have port forwarded the required ports through my router 2: I have allowed exceptions for the required ports through my firewall and also...
  13. R

    Buying my next monitor

    I've decided to invest into a new monitor and I am in a big dilemma. I have a budget of around 500€ and I am set on buying a 27' or 32' monitor with 144Hz refresh rate. The problem comes with choosing the resolution and the panel type. The problem with resolution is that I usually play games...
  14. J

    Mixing RAM timings and speed.

    Hello everyone. I'm here with a question that's been made quite often. I've been reading many topics but I couldn't find any direct answer to my situation. I'd like to upgrade from 8G RAM to 16G RAM my Acer Aspire E5- 575G-562T. This notebook is using a 1x8G Sk Hynix H5AN8G8NAFR TFC RAM...
  15. H

    [SOLVED] How do I open my case?

    I have no clue how to open my case and am looking to finally upgrade my computer. What kind of screwdrivers will I need? Has anyone got any tutorials that may help? It's a game max onyx I belive.
  16. A

    Rx560+8gb ram or GTX 1050ti+ 6gb ram?

    Hey, I'm upgrading my old pc.And on a tight budget. Now I have 2 options: 1. Should I buy a Rx560 4gb and 8gb ram(4×2). Or 2. Should I buy a GTX 1050ti 4gb with 6gb ram ( 2+4) Specifications: Motherboard: GA H55M S2H (PCI 2.0×16) PSU : TP ATX 10 ( 500W ) Core i3 530 2.93 ghz The 1050ti is a...
  17. S

    how to upgrade pc sound card

    how to upgrade pc sound card
  18. E

    [SOLVED] 4k or 1440p 144hz?

    so i currently have 1440p 60hz and i want to updgrade, for those of you who have seen both, what is the bigger jump, 60hz to 144hz, or 1440p to 4k? keep in the mind that performance is more important to me than graphics, for example, i rather play at medium settings 60fps than ultra settings...
  19. P

    Hi! First question: Can I even do this?

    Lenovo laptop>wireless>Netgear D2200D 1FRNAS>wireless>ASUS RT-N12>LAN>Printer Laptop is Lenova Yoga 710 15IKB Model 80V5 Netgear D2200D 1FRNAS is a ADSL modem/router/access point supplied by Frontier (yeah, those guys) ASUS RT-N12 is a wireless N access point/router Printer is a KX-MB781 GDI...
  20. S

    Need Help Port Forwarding my Router

    I have recently bought the TP-Link ARCHER CR1900 AC1900 Wi-Fi Docsis 3.0 24x8 Cable Modem Router, and am having trouble port forwarding, any advice on how to achieve port forwarding on this modem?