voltage

Yo, I'm having a problem getting the rated 3200MHz out of my 'Corsair Vengeance RGB (4x32GB)' on a new BIOS revision where previously everything was fine. I have an ASUS ROG Rampage VI Extreme and XMP was working fine with BIOS 2002; however, after updating to 3006, I cannot get my RAM to boot...

I have a RX570 and in MSI after burner and Adreneline 2020 i have a custom undervolt set up to compensate for my cards poor thermals However when my PC is idle i have just noticed that in the idle P-state at 300MHz my voltage is showing as .900V whenit should be set to .750 as outlined in my...

Hi everybody. Question about voltage and tempratures on my i7 6700K. Help would be very appreciated. Here is the TL;DR for people who don't want to read the entire post: Question 1) Why does every program in Windows show a different temprature, and why does it fluctuate like this? Question 2)...

Hello everyone :) I have been having some weird issues for a good few months now. Randomly without warning, the USBs will drop out (such as audio interface and USB HDDs) and then come back again almost instantly. I also have random blue screens when I start the computer up and when I check it...

Hello, I have had recently many tough times with RAM, now I have bought a new HX432C16PB3K2/32 - the specs of this baby are such: 3200MHz, 32 GB, CL-16. Once I first plugged them in (right after clearing CMOS because I was testing the other RAM before which did not work and took a lot out of my...

Hi, I bought a Ryzen 5 3600 and i'm not sure if the temperatures are ok, I'm testing temps with Core Temp and while i'm playing it reaches 90ºc(what i don't know if it's normal), I am not planning on overclocking it and it has the stock cooler. I tried changing the voltage with the AMD Ryzen...

:unsure: They are on my motherboard, a Gigabyte X570 Auros Master. Do they have something to do with the power supply? I've also seen it display two 'A' letters sometimes. Link: https://www.aorus.com/X570-AORUS-MASTER-rev-10

I didn't really know what I was doing a few months ago and I changed the core voltage in msi afterburner a bit (I was looking at some mac bootcamp overclocking tutorial and it told me to change it but I don't know) but yeah shortly after it bluescreened and I got spooked and uninstalled...

Hey guys, first overclock here! I'm quite noob so I might have done something wrong. I have an i5 4690k with 3.50 Ghz stock. I saw that OC genie set the default cpu ratio to 40, so i started from there ... I managed to get to 44 with stable results. I turned up a notch to 45 and 1.25 V. In the...

I wanted to reduce my ram cas latency, i tried to decrease the cas by 1 more and it wasn't successful so, i am thinking of overvoltage my ram in order to do that so, what do you say? Is increasing the voltage helping decreasing the cas latency or for cas the voltage doesn't matter at all? Thanks!

Hey so i built my pc recently with 5700xt evoke OC GPU and realized that its voltage is 725mV, from what i read people use like 1000mV which makes the card run at higher clocks, so my qustion is how would i overvolt it, what software should i use? Also if anyone uses same card, what approximate...

View: https://imgur.com/PX80xq7 I just installed my new RAMS (Kingston HyperX Predator 16 Gt (2 x 8 Gt) 3200 MHz DDR4 CL16) two packs of those=4 pieces. I enabled XMP profile in bios. Is that dram voltage too high?? on the left is current middle minium on the right highest. Is this ok? check...

Hello. Is this normal. I mean the voltage and speed. Should be lower voltage and speed close to 3.6 and not 4? i didn't Overclocked anything or messed with ryzen master. The only thing is did was enable D.O.C.P profile on RAM so they run on their true speed. Motherboard: TUF GAMING X570-PLUS...

hello, i have a dell optiplex 990dt, recently one of the ram modules i have died i guess, the pc basically dose not turn on when that ram module is on it, so i assumed its dead, so im looking for a ram module of 8gb ddr3 and ive just noticed ram sticks have different voltages but i just cant...

I have issue with +12v reading in Mobo is just 10.2 at max and it suddenly off and on again and again. My PSU Seasonic Platinum 750w only 6 month y.o What should I do?

Ok so I just got my ryzen 7 2700 with the Gigabyte B450m S2H motherboard. I stress tested the cpu and for some reason the voltage which is on auto goes around 1.0 to 1.09 volt which seems pretty low. I try to overclock the cpu to 3.6 ghz and after I booted on windows 10 and opened chrome my...

I'm overclocking my i7 6700k on a Z170-A mobo. I was using the mobo's "EZ Tuning" feature to get a benchmark for how much I can overclock my CPU on this board before manually setting it. It has essentially 3 different tuning settings and each seemed to give me higher than normal Vcore values...

I want to buy two automatic voltage regulator (AVR) 2.4KVA - 2.4 Kw to protect the following UPS No-Breaks: One that has the following input specs in it's label: 220V/18A=3960W Another one that has this input specs in it's label: 120V/24A=2880W The question is: If I buy an automatic voltage...

Hello... plz help. First of all, sorry for the broken english, I haven't written much in english recently and I don't know most of the tech terms but I'll make a great effort to make it readable. I have a very specific issue. At the place i work with, one of those thingies called Uninterruptible...

Hello, I've had this Gigabyte 980 ti for a while and i gave it to a friend. It was damaged somehow and would't output anything to monitors (pretty sure it didn't really do anything. I baked the card at 385 F for 8-10 minutes, following the advice of ifixit. I've done this 5 or 6 times before...

As soon as I turn on my computer the cpu heat constantly rises until about 100 C. I just noticed do the cpu only using about 30 %. I changed to the cooler recently to the H100i Platinum. I've run the intel extreme turning and it says thermal throttling . From my research I believe the solution...

People, I need to ask you, what do you think it can be? This is my problem. For some reason my source of power when under load makes a sound that is little heard but heard also it wont boot sometimes not even reaching BIOS, but all the fans and lights will turn on I changed the PSU and...

Hi all, I have a problem with my Corsair RAMs. I enabled the XMP and it caused instability and blue screens. Then I tried to use the Ryzen DRAM calaculator. But it didn't help and my computer remained instabil. Then I tried to increase the DRAM Voltage and it helped i've put it on 1.45V but it...

Specs: https://pcpartpicker.com/user/theinfamoustoast/saved/#view=TCWWbv CPU settings: https://drive.google.com/open?id=11zqoHR3Tl_qHClAs20qsmN9WNXNoQ6QS right now I'm tweaking my overclock for the 7700k and seeing how far it can go. i did it in the past but I'm only really doing this now since...

Hello there, I have been having some problems with my PC recently. While playing games, PC keep getting freezed without any notice. When I say freeze, it means complete freeze along with screen, keyboard led, mouse led etc. After this freeze, I removed PC power cable and waited for couple of...

Hello. I have quite an old rig based on an AMD X4 870K (Base speed 3.9 - TURBO 4.1) I managed to get an rx 570 strix gaming oc at around 90 bucks and,being quite an overkill for this cpu, i tried to overclock it a bit since i was experimenting bad times with this cpu along the time. The thing is...

Hello, Specs: Nvidia 1070 ti overclocked Ram: 2 x 8gb 3200 mhz, overclocked to 3266 mhz, 18-18-18-38 timings Motherboard: B350 Tomahawk I own a 2600x stock cooler, with a decent airflow case(5 vents),decent ambient temperature and i was messing around with OC At the moment i have overclocked...

CPU: i7 6700k Motherboard: Msi z170s SLi plus Ram: 16gb g-skill aegis 3000mhz SSD/HDD: 128gb adata ssd, 1.5tb toshiba HDD GPU: Gtx 1070 PSU: Corsair cx 500 Chassis: Bitfenix Comrade OS: Windows 10 pro I had this issue with my 6600k as well. Cpu-z is recording the correct voltage but the board...

Hello everyone first of all my English is not that good so i hope you understand what i say. If you want to check my specs it will be listed below. So CPU-Z says "Multiplier x 21.0 (9 - 24)" my CPU can go max x21 and CPU-Z says that it can go up to x24. Do i need to bump up the Voltage in BIOS...