XMP

Hi yall. So for starters I have a AsRock B650m Pro RS Wifi paired with an 7900X and A-DATA XPG 16x2 DDR5 7200. I was curious if its at all possible to overclock RAM manually instead of using XMP or EXPO? Like could i manually tune it say 6000 MHz? My board doesn't support 7200 at 32 GHz. So my...

Hello, I have an MSI MAG Z690 TOMAHAWK WIFI motherboard with Corsair 64GB KIT DDR5 6200MHz CL32 Vengeance Black RAM. Yesterday I purchased the Creative Pebble X speakers and found out that when I use the motherboard’s rear USB-C port for my speakers, the speakers don't work if XMP is enabled in...

Hi everyone, I recently activated the XMP profile on my motherboard (B450 AORUS ELITE) and game are crashing like 5 minutes after all. I don't really get it why, I've seen that my CPU can be at max 3200 mhz and that's the mhz I get when I activate the XMP profile. (Proc : AMD Ryzen 7 2700X...

I have ryzen 7 7800x3d, Asrock b650 pro rs motherboard and KINGSTON Fury Beast RGB KF564C32BBAK2-32 ram (QVL for my motherboard). I have the latest bios. I tried another power supply and it's the same so i know it's not the PSU. I know that it could be faulty cpu memory controller or the...

I noticed that XMP was disabled in my BIOS settings and I'd heard before that it can increase RAM performance, I searched around and it seemed pretty safe so I enabled XMP and my system would no longer post. After a few failed attempts, and some troubling noises, it booted to the American...

My specs are: - Ryzsn 5 8600G - Gigabyte A620I AX (BIOS ver. F31b) - TeamGroup T-Create Expert Overclocking White DDR5-6000 CL30 (the box states it's compatible with XMP AND EXPO so I assume it's good) - Seasonic GM-550 550W PSU When enabling EXPO profile 1 (or XMP, idk the difference between...

Kingston FURY Renegade RGB KF564C32RSAK2-64 64GB will work expo on B650 E E STRIX AND RYZEN 7800X3D? as the title states will this ram works fully on 6400 mhz on strix b650e e motherboard and ryzen 7800x3d psu coolermaster 750w V gold I

I made a post about this previously, but never new why it was doing it. My PC doesn't appear to like XMP as when I turn it on, it crashes intermittently. I know it's not a power issue, I know it's not CPU related as when turned off, it's completely fine. I have a feeling the RAM might be corrupt...

im experiencing some issues when using the xmp profile on my new asus z690-f motherboard, it is quite random, but im getting some massive freezes when gaming. If i alt tab the game unfreezes, my guess is that the xmp profile is causing it but im not sure, the voltage and the cpu is not the issue...

I bought a pre built PC with the following specs a month ago: CPUi7-14700F Number of Cores20 (8 P-cores, 12 E-cores) Number of Threads28 Clock Speed2.1 GHz base P-core, up to 5.40 GHz Max Turbo Processor Cooling240mm AIO Liquid Cooling Memory32GB Memory Config32GB (2x16GB) DDR5-6000 RGB RAM...

Hello~ So I have been playing this one game called V Rising. It has been playing well but the game will exit to desktop immediately when I try to interact with some assets in the game. I have been reading some posts and FAQ, and I am suspecting it's due to XMP not handling the RAM correctly...

I have an ASUS Prime B360 M-A motherboard which I'm 99% sure is able to enable XMP, and I know my ram is eligible to, I checked benchmark and was told I could enable XMP on it. When I go to BIOS, (Latest version of bios available for my motherboard) I cannot find the option to enable XMP where...

So I just built my new PC and I’m using Corsair Vengeance DDR5 6000mhz RAM. When I use any of the XMP profiles on the Asus Z790E motherboard, the PC crashes. I was able to get it stable by setting the vdd and vddq to 1.35 volts, but it’s supposed to be running at 1.4 volts for them both and I...

Hi everyone, I'm having a serious issue with my Gigabyte Z390 AORUS PRO (rev. 1.0) motherboard. The "Extreme Memory Profile (XMP)" option is simply not appearing in the BIOS, despite multiple attempts to resolve the issue. Here’s a summary of what has happened so far: 1. My Setup and...

I've had my pc for some time but I've only turned the ram's XMP on recently, and my game's (only tried dragon's dogma 2) started crashing after only a minute of play and it was unplayable. It has two xmp profiles, one is the advertised 6000 MHz and the other is at 5600, the second lower speed...

So I put together another pc build, and after making sure that windows is installed correctly I ran into some weird problems. I can't seem to get past Bios when enabling XMP memory profile, the system doesn't boot after I switch Xmp on and I can't reach into the Bios anymore, only if I clear...

Hi everyone, I hope you're doing well. I'm having troubles with my ram kit / pc building. Config : CPU : 13700K stock RAM : Corsair CMK64GX4M2D3600C18 (2x32Go 3600 MHz CL18) MB : Z690 AORUS ELITE AX DDR4 I cannot for the love of god make my RAM go past 2133MHz which is... not ideal. If...

Im going to build my new pc using: MBD: Rog Z690 E Gaming WiFi CPU: i7-12700k …. Now im confused with Ram , i want to use 4 stick of Ram , upon my research i found that the i7-12700k has issues supporting 6000mhz plus Ram when using 4 sticks. So what is the safe option to use 4 DDR5 Ram and what...

Hello, so I've been using XMP profile for some time, without any problems, until one day. While I was playing some video game, montior went black, and I had to restart whole PC, only to find out that monitor was still black, and my mobo gave my 4 beep signals. After reseting MOBO and switching...

hi, i have an older system and have recently decided to put an extra ram kit (different modules) in my system but have noticed that it doesnt have an xmp profile, if i take out my old ram and go to bios there is no xmp option but if i put both kits in there is xmp option. if i enable xmp and try...

so i am at my girlfriend's house, she owns a gaming pc, following specs: Asrock b450 k4 p4.80 r5 3600 2x8gb 3200mhz Gskill cl16 memory gtx 1660 my girlfriend's parents ask her to turn off the power strip off to save energy, she knows not to turn off her pc through the psu switch or the power...

Hi all, had some problems regarding the stress testing I did on my new cpu. System specs: 14900k, 4080 super, asus prime z790-a wifi, 64gb g skill trident z5 DDR5 6400, LT720 360mm AIO (fans maxed for this test). Two main issues: 1 - temperature shoots up to 100 degrees Celsius immediately...

My Build: CPU: Intel i9-10850k 3.6GHz RAM: Corsair Vengance LPX DD4 RAM 32GB (2x16GB) 3200MHz GPU: XFX Speedster MERC 319 AMD Radeon RX 6900 XT Mobo: ASUS ROG Strix Z490-E Gaming Z490- WiFi 6, LGA 1200 (Intel 10th Gen) ATX Gaming Motherboard I have tried both XMP profiles, I have also tried...

Hi, I have searched for a bit but the more I look up on this the more confused I end up being. I build a new PC, forgot to check RAM speed. Everything worked fine. I checked taskmanager yesterday and saw that my memory runs on 4000MHz. Now, my RAM should be capable of 6000MT/s. I enabled XMP...

Hello all, i have run into a problem with my memory speed in the last couple of months. PC parts: AMD Ryzen 7 5800X 8x 3.80GHz So.AM4 WOF 32GB Corsair Vengeance LPX DDR4-3600MHz (4x8GB) DIMM 288-PIN PC4-28800 Gigabyte B550 Aorus Elite AX V2 So.AM4 ATX Retail With XMP Profile 1 enabled, PC...

GPU : Nvidia 3060Ti MSi CPU : Intel 12700Kf Motherboard : Gigabyte Z690 Gaming X DDR5 Ram : 32 GB F5-6000J3040F16GX2-TZ5RK G.Skill (A2,B2) PSU : Seasonic FOCUS PLUS 750W Platinum Storage : Samsung 970 EVO Plus (M.2 SSD) 1x 2,5" 500gb ssd 1x 1tb hdd BIOS F29A OS Win11 Hello Guys, Im currently...

Hey i had 2x8 crucial balistix 3000mhz cl 17 and i had them working just fine on xmp at 2933 mhz then i bought another 2x8 crucial 3000mhz cl15 and it only worked at 2400mhz and i later knew that those 2 sets of ram cant work togather now when i remove one of these 2 sets it fail to work at 2933...

Welp, this is frustrating! PC randomly goes to black screen and reboots. This system has worked perfectly for over a year, the only change I've made is upgrade from a 3080 to a 4070 ti. Seems to be solved when I disable RAM DOCP. System: b550 i gaming 5600x 16gb g.skill 3600 c14 4070 ti...

I can’t find an option for XMP in BIOS, there’s system memory multiplier but no XMP, Gigabyte H110M-S2H, BIOS version: F25

Running configuration: MBO: Gigabyte z690 ud ddr4 CPU: i7 12700K VGA: Gigabyte GF RTX3080 AORUS X, 10GB GDDR6X MEM: G.SKILL Ripjaws V, F4-4000C14D-16GVK, DDR4 4000MH 4x8gb PSU: Corsair 1000W HX1000, 80 PLUS Platinum Fractal Celsius S36 Water cooling I've tried enabling XMP profile, manually...

I bought this : OLOy DDR4 RAM 16GB (2x8GB) Warhawk Aura Sync RGB 3000 MHz CL16 1.35V https://www.amazon.com/OLOy-Warhawk-288-Pin-Desktop-MD4U0830160BE0DA/dp/B08922VXHN?th=1 and my motherboard (H410M Pro) is limiting it to 2666mhz, but thats okay for me, anyways i opened speccy to check my ram...

Hi, might be silly question but will this ram fit and work fine with xmp/ecpo overclocking stuff? G.Skill Ripjaws S5 32GB (2x16GB) DDR5 6000 CL32 ASRock X670E Pro RS direct links for the products...

Hello there, Yes, I got a old build (I will go on a new platform if I can), but I want to get out the max power of my computer. In this post: https://forums.tomshardware.com/threads/should-i-switch-to-i7-4790k-or-would-it-be-better-to-buy-a-new-computer.3822865/, the problem specified by many...

Hi there I recently upgraded my PC. I now have a Gigabyte Z790 Aorus Elite AX Rev 1.1. I also purchased 32GB of RAM. Specifically, G.skill Trident Z5. Timings are CL34-45-45-115. DDR5-7200 16GBx2 My CPU is an Intel i5-13600K My PC boots normally into my previous Windows installation. However...

I get random (every few hours/days) display message "No HDMI signal coming from your device" and Bios completely resets (ram returns to 2133mhz, clock to 00:00) after using XMP for some time, sometime it doesn't happen at all, sometimes happens after few hours of use. Motherboard: Gigabyte B450...

Which one should i enable through ai overclock tuner? For best ram speeds? My motherboard is asus a620m-k, rams are DDR5

This may be a stupid question but... Can 3600MHz ram be "XMP"'d to 3200MHz? The Elaborate, I'm looking to buy 3600MHz ram but my motherboard can only take up to 2933MHz. It says it can take up to 3600Mhz O.C and that it supports XMP. How could I O.C a ram stick that is already running at a...

hello im recently switch to this combo R7 7800X3D Asrock B650e pg riptide RTX 3080 Galax Corsair Vengeance RGB 64GB 2x32GB When my bios at 1.21 ver, I can use XMP 5600 profile fine, no problem. But after i update my bios to 1.28, i turned on XMP, saved and restart. After that my PC wont boot...

I've been using this PC for approximately 6 months perfectly well from Jan to June. One day, it failed to POST, so I took it to the store. They diagnosed the issue as a malfunctioning RAM module, replaced it, and the PC booted up fine. It worked perfectly well for the next 6 days, but on the 7th...

I tried enabling XMP and using 2933 MHz for my RAM but when I save settings and my PC restarts, when I check my RAM, it still in default speed: 2133MHz. When I check back the BIOS, the XMP is enabled and saved at 2933 MHz but doesn't apply for some reason. Why doesn't it apply the changes...