z390 aorus master

Hello! I own a Gigabyte Z390 Aorus Master (rev. 1.0) motherboard. The BIOS version that I am on is: F11. Gigabyte released version F12 recently. Question: Did anyone updated this motherboard model to the F12 version? Is it OK?

Hello! My motherboard is Gigabyte Z390 Aorus Master. I've updated the main BIOS from F11n to F11. Everything was fine and was able to boot into Windows. Later I've observed that Secure Boot was disabled and I could not enable it (as required by Win11). It gave me the following message...

I have a question regarding connecting the rm850x to the z390 aorus master motherboard. I have two identical CPU cables that came with the CPU. On one end of the cable it says CPU and you can split the connector on this end, on the other end it says "type 4". Both endings have 8 pins but they do...

(deleted)

Hello. I have just finished assembling my first PC, every component new and fresh out of the box. However, I turn on the Power Supply, and then switch everything on, and it works for a good 10 seconds before it shuts off, then turns back on again, and keeps doing that, turning on and off. Each...

Hi everybody, In short, I Overclocked my 9900k to 5ghz, the vCore was at 1.32. While running prime95 (blend) within the first 5 minutes the pc suddenly shut down and rebooted back into windows, no blue screen, simply a reboot. No surprise that it happened when the Blend test was at its "hot...

Hi everybody, I have 9900K with Z390 Aorus Master board. I am also equipped with Noctua NH-D15 cooler. With all the information about the (notorious) MCE setting in the bios, I couldn't find a definite conclusion. I know the majority of people prefer no to use it cause you can just dial a...

Hi! There is an empty field in QVL for "4 memory socket support". http://download.gigabyte.us/FileList/Memory/mb_memory_z390-aorus-master.pdf How do you think, will it work as it should with XMP, etc? Maybe anyone tried this particular setup? Thanks.

If mobo z390 aorus master gigabt and i7 9700k and power in windows on balanced what would push cpu in clocking always 4.7 ghz even idle on all cores,would it be mce enabled?also what would be the difference between auto and enabled on both mce and turbo boost Thanks in advance

I'm having my first build with below components: Gigabyte - Z390 AORUS MASTER ATX LGA1151 Motherboard Intel Core i9-9900K 3.6 GHz 8-Core Processor Corsair Vengeance LPX 64 GB (4x16GB) DDR4-3200 Memory EVGA GeForce RTX 2060 XC ULTRA NZXT Kraken X72 Liquid CPU Cooler Corsair RMx 1000 W 80+ ATX...