Question “No Signal” after bios and windows loading.

TTVBTW

Prominent
Mar 20, 2019
53
0
530
I built my pc about half a year ago, I’ve been having problems off and on. Right now I’m having it boots past the bios and the windows loading screen, then it says no signal. Before when I had this problem I could restart the pc but that’s not working now. Idk please help.
I have a Vega 56, Ryzen 5 2600x hp ex920 (500gb)
 
Last edited:

Ralston18

Titan
Moderator
Update your post to include full system hardware specs.

Have you since opened the case to clean the interior and reseat all cards and cables?

Very likely that components and connections have been creeping loose due to thermal expansion and contraction. And vibrations as well.

Take a careful look, check everything, and post accordingly.
 

TTVBTW

Prominent
Mar 20, 2019
53
0
530
Update your post to include full system hardware specs.

Have you since opened the case to clean the interior and reseat all cards and cables?

Very likely that components and connections have been creeping loose due to thermal expansion and contraction. And vibrations as well.

Take a careful look, check everything, and post accordingly.
I got past that but now I downloaded amd gpu drivers and it restarted as normal but then just said “No Signal”. I shut it off cause the pc was still running. But now I can’t get into Windows 10.
 

Ralston18

Titan
Moderator
"No signal":

Do you hear any beeps or see any LED's light up?

Try booting into Safe Mode.

Try another known working video cable between PC and monitor.

Try another known working monitor. Or TV if the TV supports PC input.

Try any built-in motherboard video ports versus the GPU (remove the GPU).

How are you shutting down the pc?

PSU: make, model, wattage, age (6 months? ) condition?