Hi, recently I’ve built a PC (ryzen 5 1500x & GTX 1050Ti) which for 2 months straight had no problems.
Now all of a sudden, “No signal detected!” appears on my BenQ Zowie XL2411. I tried almost everything (except if you tell me try something else):
- turn off turn on, restart, etc
- cable switch (I’m using dual link, tried dvi-d but still no result)
- manually switch monitor output to dual link
- 24pin & 6pin were okay, but just to be sure I unplugged and plugged them right away, eventho my psu isn’t trash
I am not sure if the problem is in my monitor, bc I plugged it in my old pc and it worked, I also googled everything I can do, still nothing.
Every little help is appreciated, thank you!
Now all of a sudden, “No signal detected!” appears on my BenQ Zowie XL2411. I tried almost everything (except if you tell me try something else):
- turn off turn on, restart, etc
- cable switch (I’m using dual link, tried dvi-d but still no result)
- manually switch monitor output to dual link
- 24pin & 6pin were okay, but just to be sure I unplugged and plugged them right away, eventho my psu isn’t trash
I am not sure if the problem is in my monitor, bc I plugged it in my old pc and it worked, I also googled everything I can do, still nothing.
Every little help is appreciated, thank you!
Facebook
Twitter
Instagram