So let me preface this by making two points. There is absolutely nothing wrong with my 1070. and I highly apologize for any bad grammar or structure mistakes because I am on my phone. First off I can list my specs here.
GTX 1070 Rog Strix 8 gb
Fx-8350
Biostar A880gz Micro atx
1 250 Gb SSD sameung (Not boot drive)
1TB seagate HDD
Rosewill 450 Watt PSU 80 bronze
Hyper 212 Evo Cooler
1 8 GB Corsair Vengeance DDR3
1 8 GB Ballistix DDR3 (they both are compatible
So previouly I had a GTX 1050 TI on my board. No issues whatsoever. I was worried at first that my 450 watt PSU wouls not be able to handle a triple fan 1070 but me and my uncle fitted it. and turned it on. Everything posted into windows until somehow everything just mysteriously shut off. We dismissed it as windows 10 being weird with the new gpu and turned it on again. Everything worked absolutely fantastic for the next 24 hours. Temps were good. Cpu wasnt going over 50 Celcius and the 1070 was staying at 57 under pretty good load playing red dead 2 and FF14. though following the next day. I started getting mysterious fatal errors in final fantasy. cant rememver for the life of me what they were but it was crashing to desktop. Then after a while they transformed into DX11 errors. Now let me say that its my mistake. I shouldve used DDU and clean installed my video drivers. But I assumed if there were no issues for a day. It would continue to ve that way (Very naive of me) So after this recent final fantasy crash. I walk to the kitchen and walk back in a span of three minutes or so. I come back to my keyboard rgb shutting off. and no display input on either of my monitors. I was utterly confused and panicked. So i restarted. No input. So I take out my 1050 TI and slot it back in. No input. I try switching cables, no input. Ive got one monitor using DVI and one using HDMI. neither are getting signal with any configuration. So I try reseating the CPU. No input. I try different combos of ram. No input. So finally I decide to take out the CMOS and put it back in. It actually boots and monitors regain signal. so I quicjly hit F2 and try to find safemode because at this point im thinking its a driver issue. And while im in BIOS. boom. Input goes darj. I try resetting the cmos with combinations of the 1070 and 1050 again. and now I get no input no matter what I do. My BIOS is up to date. that much im certain. But Im at a loss here. There is a white power light on the 1070 that will blink red if theres a PSU problem but it stays solid white
GTX 1070 Rog Strix 8 gb
Fx-8350
Biostar A880gz Micro atx
1 250 Gb SSD sameung (Not boot drive)
1TB seagate HDD
Rosewill 450 Watt PSU 80 bronze
Hyper 212 Evo Cooler
1 8 GB Corsair Vengeance DDR3
1 8 GB Ballistix DDR3 (they both are compatible
So previouly I had a GTX 1050 TI on my board. No issues whatsoever. I was worried at first that my 450 watt PSU wouls not be able to handle a triple fan 1070 but me and my uncle fitted it. and turned it on. Everything posted into windows until somehow everything just mysteriously shut off. We dismissed it as windows 10 being weird with the new gpu and turned it on again. Everything worked absolutely fantastic for the next 24 hours. Temps were good. Cpu wasnt going over 50 Celcius and the 1070 was staying at 57 under pretty good load playing red dead 2 and FF14. though following the next day. I started getting mysterious fatal errors in final fantasy. cant rememver for the life of me what they were but it was crashing to desktop. Then after a while they transformed into DX11 errors. Now let me say that its my mistake. I shouldve used DDU and clean installed my video drivers. But I assumed if there were no issues for a day. It would continue to ve that way (Very naive of me) So after this recent final fantasy crash. I walk to the kitchen and walk back in a span of three minutes or so. I come back to my keyboard rgb shutting off. and no display input on either of my monitors. I was utterly confused and panicked. So i restarted. No input. So I take out my 1050 TI and slot it back in. No input. I try switching cables, no input. Ive got one monitor using DVI and one using HDMI. neither are getting signal with any configuration. So I try reseating the CPU. No input. I try different combos of ram. No input. So finally I decide to take out the CMOS and put it back in. It actually boots and monitors regain signal. so I quicjly hit F2 and try to find safemode because at this point im thinking its a driver issue. And while im in BIOS. boom. Input goes darj. I try resetting the cmos with combinations of the 1070 and 1050 again. and now I get no input no matter what I do. My BIOS is up to date. that much im certain. But Im at a loss here. There is a white power light on the 1070 that will blink red if theres a PSU problem but it stays solid white