[SOLVED] 1 to 4 fan splitter (non molex, non gub)

[Does it work]

I have only been able to find one 4 way fan splitter that didnt run on molex or as a hub, and the seller just canceled that on me.

So does anyone know where I can get a 1 to 4 way fan splitter (4 pins pref)? Mobo only has 1 header, and the wires on my fans are too short to all be able to reach a hub without decidedly going straight through the heatsink (which is both impossible and not an ideal solution anyway).

 

[Crosslhs82x2]

Would going this help?
Hub
https://www.newegg.com/p/2S7-01M6-02W64
Extension
https://www.newegg.com/p/N82E16812423167

 

[Does it work]

Would going this help?
Hub
https://www.newegg.com/p/2S7-01M6-02W64
Extension
https://www.newegg.com/p/N82E16812423167

No idea, the pages refuse to load.

I should have noted its a mini-itx system, having 5 30cm+ cables seems a little stuffy

Something like this, but like, not $80. And not like this (4 pins, decent price, but doesn't ship to Australia, also watch for shipping, it can be a joke, $112 standard for a $3 item sort of joke)

 

[Crosslhs82x2]

Strange i just clicked the links and took me right to them.
Try this on Amazon
https://www.amazon.com/Cooling-Spli...er+39.5cm+Z07&qid=1568996129&s=gateway&sr=8-1

The id=1568996129 is the product # it that link does work try manually with that #.

And this is fan plug extension item # on newegg N82E16812423167
On Amazon it's not coming up
But i found this
https://www.amazon.com/HJ-Garden-Co...ug+extension&qid=1568996601&s=gateway&sr=8-15

Depending on how many fans your looking at running on the fan header most likely will supply 1 amp so total amps of all fans drawing power from a 1amp header may hamper if fans total needs more then what can be supplied.
I a case of that could possibly go to a
Fan controller that would sit in a drive bay that would give you control over each fan as such
https://www.newegg.com/p/376-0043-00014

Incase that link doesn't work try manually putting this in to search field.
9SIA4RE95F7830
Good luck

 

[Does it work]

Strange i just clicked the links and took me right to them.
Try this on Amazon
https://www.amazon.com/Cooling-Splitter-Adapter-Braided-39-5cm/dp/B07MGKM6XL/ref=mp_s_a_1_1?keywords=Black+1+To+5+4-Pin+TX4+PWM+CPU+Cooling+Fan/Case+Splitter+Adapter+Braided+Power+Cable+Hub+Splitter+Adapter+39.5cm+Z07&qid=1568996129&s=gateway&sr=8-1

The id=1568996129 is the product # it that link does work try manually with that #.

And this is fan plug extension item # on newegg N82E16812423167
On Amazon it's not coming up
But i found this
https://www.amazon.com/HJ-Garden-Co...ug+extension&qid=1568996601&s=gateway&sr=8-15

Depending on how many fans your looking at running on the fan header most likely will supply 1 amp so total amps of all fans drawing power from a 1amp header may hamper if fans total needs more then what can be supplied.
I a case of that could possibly go to a
Fan controller that would sit in a drive bay that would give you control over each fan as such
https://www.newegg.com/p/376-0043-00014

Incase that link doesn't work try manually putting this in to search field.
9SIA4RE95F7830
Good luck

The 4 are under 1a combined. Ideally a 1to4 way splitter (1 header into 4 on wires, with fan control) would be best, but with how hard they are to find, a hub would be the best option, would rather not need the extension cables, but seems like might have to.

A hub needs to go into the cpu fan header doesn't it? And how exactly do I mount the hub you linked? Ill go find the cable length of my fans to check, iirc though may be too short for all 4 to reach

 

[Crosslhs82x2]

Some hubs have a like doubleside tape or pad on the back side to peel and stick where it's convenient for all fans leads on any flat surface. If it doesn't have use velcro.
It would depend alot on your case, if it has holes around the mobo tray for cable routing to get varies wires behind the tray for hookup.
If not the a powered fan controller would hook to your psu for the power then has separate leads to each fan that way the fans can be controlled but that would require a 5.25 drive bay.

So fan splitter/hub all fans would run the same rpm.

5.25in drive bay powered fan controller would have a control for each fan independently.

 

[Does it work]

Some hubs have a like doubleside tape or pad on the back side to peel and stick where it's convenient for all fans leads on any flat surface. If it doesn't have use velcro.
It would depend alot on your case, if it has holes around the mobo tray for cable routing to get varies wires behind the tray for hookup.
If not the a powered fan controller would hook to your psu for the power then has separate leads to each fan that way the fans can be controlled but that would require a 5.25 drive bay.

So fan splitter/hub all fans would run the same rpm.

5.25in drive bay powered fan controller would have a control for each fan independently.

The case is 87x208x208mm, fans are in middle on top and bottom, there would be space for the hubabout 3/4 way up on the front.

But I would still prefer a 1x4 splitter as they have length, want to try avoid buying 5 things vs 1 as the fan cables are only 90mm, having that 4 way splitter canceled really stuffed me, damnwell hard to find

Also realise tag wrong. It was a 1 to 4 way pwm splitter, 3 or 4 pins, 4 just pref, i need the control from header as molex would pump out 3000rpm, and that would be stupid loud

 

[Does it work]

It's all good, PCCG (PC Case Gear) the legends they are went out and brought in the product as a new line when asked them