Symptoms: I was happily surfing the web when suddenly get blue screen saying critical error. I turn off comp. restart. continue. 1 hour later same thing, only this time on the restart says there's no os..
specs:
leveno m92p (Stock motherboard very limited in bios)
500w power supply
16 gb ram
gtx 1060
ssd 450gb Kingston savage ( <--------- the culprit )
hhd 650 gb
Course of action:
- SSD IS VISIBLE IN BIOS
- tried swapping cables
-tried swapping sata ports ( I have sata 2, sata 3, and e sata )
- tried win 10 boot usb .... Wont boot. ?#%? (stuck in initial splash, loading.)
- ( I changed boot order in bios when I was booting)
- tried disconnecting ssd, boot from usb successful.
- ssd re-connected. boot from usb unsuccessful .
- disconnected ssd and installed windows on hdd, success .
- plugged ssd in and booted win from hhd. stuck in splash.
- downloaded firmware from Kingston , onto bootable usb , lynix just shuts down after spash (ssd connected)
-ok, Lets wipe it! Load boot 'n nuke from cd. bootnuke sees the drive.
- Bootnuke only sees 2 gb on the drive? wipe it anyway
- No change in all above situations
- ok why not? hotswap time.
- load win on new hdd install, connect ssd to esata hot.comp make a happy i found something sound. go to disk management find ssd. click for info,... no info.
-disconnect, pack it up, call kingston.
- sorry if you are not the original purchaser our warranty will not apply to you. that's too bad.
- make tom's hardware account.
- any idea's?
specs:
leveno m92p (Stock motherboard very limited in bios)
500w power supply
16 gb ram
gtx 1060
ssd 450gb Kingston savage ( <--------- the culprit )
hhd 650 gb
Course of action:
- SSD IS VISIBLE IN BIOS
- tried swapping cables
-tried swapping sata ports ( I have sata 2, sata 3, and e sata )
- tried win 10 boot usb .... Wont boot. ?#%? (stuck in initial splash, loading.)
- ( I changed boot order in bios when I was booting)
- tried disconnecting ssd, boot from usb successful.
- ssd re-connected. boot from usb unsuccessful .
- disconnected ssd and installed windows on hdd, success .
- plugged ssd in and booted win from hhd. stuck in splash.
- downloaded firmware from Kingston , onto bootable usb , lynix just shuts down after spash (ssd connected)
-ok, Lets wipe it! Load boot 'n nuke from cd. bootnuke sees the drive.
- Bootnuke only sees 2 gb on the drive? wipe it anyway
- No change in all above situations
- ok why not? hotswap time.
- load win on new hdd install, connect ssd to esata hot.comp make a happy i found something sound. go to disk management find ssd. click for info,... no info.
-disconnect, pack it up, call kingston.
- sorry if you are not the original purchaser our warranty will not apply to you. that's too bad.
- make tom's hardware account.
- any idea's?