System Specs:
CPU: AMD Phenom II X6 1100T Processor, Black Edition 4.1Ghz
CPU Cooler: Cooler Master V8 Nickel Plated Copper Base Aluminum Fins 8 Heatpipes
Case: Cooler Master HAF X Full Tower w/ SuperSpeed USB 3.0 w/ Window w/ Black Interior ATX Case)
HDDs: Seagate Barracuda XT 2 TB 7200RPM SATA 6 Gb/s 64MB Cache 3.5 Inch Internal Bare Drive ST32000641AS
Seagate Barracuda Green 2TB SATA 6Gb/s 64MB Cache 3.5-Inch Internal Bare Drive ST2000DL003
Graphics Card: MSI Radeon HD 6870 1 GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card with Eyefinity R6870 Twin Frozr II
Power Supply: X4 Series 850W Atx Ps
Motherboard: ASUS Sabertooth 990FX - AM3+ - TUF Series
RAM: 2x Corsair XMS3 4GB PC12800 DDR3 1600MHz 4096MB (9-9-9-24-2T) 1.65v
Ambient Room Temp is around 48 degrees F. (House has terrible insulation. haha)
Ok. I tried overclocking last night (First Attempt), I followed the AMD BE guide here on Tom's. Well I kept increasing the multiplier up til I hit 4.1Ghz (My ultimate goal is a stable 365/24/7 4.3Ghz) but I figured I would see how stable my machine is at 4.1 first.
I booted, everything went good.
Checked CPU-Z. Checked Core Temps. Looked good (I think)
Then started Prime 95 Blend test.
I sat and watched the temps, using Core Temps and the AI Suite II. At no point while I watched it, did it go over 34C. I watched for a good 30 min and it seemed to be staying right around 34C.
I left it on overnight and woke up to a restarted comp. My comp BSOD sometime during the Prime 95 test.
I really don't think that it overheated, it seemed to be running really cool. Also, I checked the results.txt from Prime and saw some errors. What could these be from?
So I am asking for help. What should I do now? What are those errors for? Any help is appreciated.
Here is a screen shot of CPU-Z and Core Temps:
Just in case you can't see the screen:
Core Voltage: 1.380 V
Core Speed: 4113.8 MHz
Multiplier: x 20.5
Bus Speed: 200.7 MHz
Here is the log from Prime95:
[Wed Jan 04 21:23:14 2012]
FATAL ERROR: Rounding was 4096, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
[Wed Jan 04 21:36:51 2012]
Self-test 640K passed!
Self-test 640K passed!
Self-test 640K passed!
Self-test 640K passed!
[Wed Jan 04 21:52:04 2012]
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
[Wed Jan 04 22:37:40 2012]
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 1024, expected less than 0.4
Hardware failure detected, consult stress.txt file.
CPU: AMD Phenom II X6 1100T Processor, Black Edition 4.1Ghz
CPU Cooler: Cooler Master V8 Nickel Plated Copper Base Aluminum Fins 8 Heatpipes
Case: Cooler Master HAF X Full Tower w/ SuperSpeed USB 3.0 w/ Window w/ Black Interior ATX Case)
HDDs: Seagate Barracuda XT 2 TB 7200RPM SATA 6 Gb/s 64MB Cache 3.5 Inch Internal Bare Drive ST32000641AS
Seagate Barracuda Green 2TB SATA 6Gb/s 64MB Cache 3.5-Inch Internal Bare Drive ST2000DL003
Graphics Card: MSI Radeon HD 6870 1 GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card with Eyefinity R6870 Twin Frozr II
Power Supply: X4 Series 850W Atx Ps
Motherboard: ASUS Sabertooth 990FX - AM3+ - TUF Series
RAM: 2x Corsair XMS3 4GB PC12800 DDR3 1600MHz 4096MB (9-9-9-24-2T) 1.65v
Ambient Room Temp is around 48 degrees F. (House has terrible insulation. haha)
Ok. I tried overclocking last night (First Attempt), I followed the AMD BE guide here on Tom's. Well I kept increasing the multiplier up til I hit 4.1Ghz (My ultimate goal is a stable 365/24/7 4.3Ghz) but I figured I would see how stable my machine is at 4.1 first.
I booted, everything went good.
Checked CPU-Z. Checked Core Temps. Looked good (I think)
Then started Prime 95 Blend test.
I sat and watched the temps, using Core Temps and the AI Suite II. At no point while I watched it, did it go over 34C. I watched for a good 30 min and it seemed to be staying right around 34C.
I left it on overnight and woke up to a restarted comp. My comp BSOD sometime during the Prime 95 test.
I really don't think that it overheated, it seemed to be running really cool. Also, I checked the results.txt from Prime and saw some errors. What could these be from?
So I am asking for help. What should I do now? What are those errors for? Any help is appreciated.
Here is a screen shot of CPU-Z and Core Temps:
Just in case you can't see the screen:
Core Voltage: 1.380 V
Core Speed: 4113.8 MHz
Multiplier: x 20.5
Bus Speed: 200.7 MHz
Here is the log from Prime95:
[Wed Jan 04 21:23:14 2012]
FATAL ERROR: Rounding was 4096, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
[Wed Jan 04 21:36:51 2012]
Self-test 640K passed!
Self-test 640K passed!
Self-test 640K passed!
Self-test 640K passed!
[Wed Jan 04 21:52:04 2012]
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
[Wed Jan 04 22:37:40 2012]
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 1024, expected less than 0.4
Hardware failure detected, consult stress.txt file.